karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / edminiv2.h

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index f0fb48828ae7e8e74627e0b065b3afb1bd3b7fde..8b38d7e75f16a2f4a8827e6b11761b3a82b04574 100644 (file)
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -6,28 +6,37 @@
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_EDMINIV2_H
 #define _CONFIG_EDMINIV2_H
 
+/* general settings */
+#define CONFIG_SYS_GENERIC_BOARD
+
+/*
+ * SPL
+ */
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NOR_SUPPORT
+#define CONFIG_SPL_TEXT_BASE           0xffff0000
+#define CONFIG_SPL_MAX_SIZE            0x0000fff0
+#define CONFIG_SPL_STACK               0x00020000
+#define CONFIG_SPL_BSS_START_ADDR      0x00020000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x0001ffff
+#define CONFIG_SYS_SPL_MALLOC_START    0x00040000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x0001ffff
+#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/orion5x/u-boot-spl.lds"
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_UBOOT_BASE          0xfff90000
+#define CONFIG_SYS_UBOOT_START         0x00800000
+#define CONFIG_SYS_TEXT_BASE           0x00800000
+
 /*
  * Version number information
  */
@@ -39,9 +48,7 @@
  */
 
 #define CONFIG_MARVELL         1
-#define CONFIG_ARM926EJS       1       /* Basic Architecture */
 #define CONFIG_FEROCEON                1       /* CPU Core subversion */
-#define CONFIG_ORION5X         1       /* SOC Family Name */
 #define CONFIG_88F5182         1       /* SOC Name */
 #define CONFIG_MACH_EDMINIV2   1       /* Machine type */
 
@@ -50,8 +57,6 @@
  * CLKs configurations
  */
 
-#define CONFIG_SYS_HZ          1000
-
 /*
  * Board-specific values for Orion5x MPP low level init:
  * - MPPs 12 to 15 are SATA LEDs (mode 5)
@@ -69,13 +74,18 @@
  * - GPIO16 is Power LED control (0 = on, 1 = off)
  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - Last GPIO is 26, further bits are supposed to be 0.
+ * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
+ * - GPIO22 is SATA disk power status ()
+ * - GPIO23 is supply status for SATA disk ()
+ * - GPIO24 is supply control for board (write 1 to power off)
+ * Last GPIO is 25, further bits are supposed to be 0.
  * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON.
+ * Default is LED ON, board ON :)
  */
 
-#define ORION5X_GPIO_OUT_ENABLE        0x03fcffff
-#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
+#define ORION5X_GPIO_OUT_ENABLE                0xfef4f0ca
+#define ORION5X_GPIO_OUT_VALUE         0x00000000
+#define ORION5X_GPIO_IN_POLARITY       0x000000d0
 
 /*
  * NS16550 Configuration
@@ -104,13 +114,9 @@
 
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_MAX_FLASH_BANKS     1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT      11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE          0xfff80000
-#define CONFIG_SYS_FLASH_SECTSZ \
-       {16384, 8192, 8192, 32768, \
-        65536, 65536, 65536, 65536, 65536, 65536, 65536}
 
 /* auto boot */
 #define CONFIG_BOOTDELAY       3       /* default enable autoboot */
@@ -124,14 +130,12 @@
 #define CONFIG_INITRD_TAG      1       /* enable INITRD tag */
 #define CONFIG_SETUP_MEMORY_TAGS 1     /* enable memory tag */
 
-#define        CONFIG_SYS_PROMPT       "EDMiniV2> "    /* Command Prompt */
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 #define        CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
                +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 /*
- * Commands configuration - using default command set for now
+ * Commands configuration
  */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_USB
@@ -200,8 +204,9 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE         ORION5X_TWSI_BASE
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_I2C_MVTWSI_BASE0                ORION5X_TWSI_BASE
 #define CONFIG_SYS_I2C_SLAVE           0x0
 #define CONFIG_SYS_I2C_SPEED           100000
 #endif
@@ -217,7 +222,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 256) /* 256kB for malloc() */
 
 /*
  * Other required minimal configurations