Unified codebase for TX28, TX48, TX51, TX53

[karo-tx-uboot.git] / include / configs / flea3.h

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index d88c578a704df9cfe244e924c2dd719760a5c05e..dd7c73f3c7bb38c27cb768f5ca6799735a593312 100644 (file)
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -34,6 +34,7 @@
 #define CONFIG_MX35_HCLK_FREQ  24000000
 
 #define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE      32
 
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -47,8 +48,6 @@
 /* Set TEXT at the beginning of the NOR flash */
 #define CONFIG_SYS_TEXT_BASE   0xA0000000
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 /* This is required to setup the ESDC controller */
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -77,7 +76,7 @@
  * UART (console)
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART3
+#define CONFIG_MXC_UART_BASE   UART3_BASE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -98,6 +97,7 @@
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
 
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_SPI
@@ -107,13 +107,12 @@
 
 #define CONFIG_BOOTDELAY       3
 
-#define CONFIG_LOADADDR                0x90800000      /* loadaddr env var */
+#define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
 
 /*
  * Ethernet on SOC (FEC)
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_PHYLIB
@@ -162,10 +161,10 @@
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   1
-#define PHYS_SDRAM_1           CSD1_BASE_ADDR
+#define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
 
-#define CONFIG_SYS_SDRAM_BASE          CSD1_BASE_ADDR
+#define CONFIG_SYS_SDRAM_BASE          CSD0_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_ADDR       (IRAM_BASE_ADDR + 0x10000)
 #define CONFIG_SYS_INIT_RAM_SIZE               (IRAM_SIZE / 2)
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
@@ -181,10 +180,14 @@
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=mxc_nand:196m(root1)," \
-                               "196m(root2),-(user);"  \
+#define MTDPARTS_DEFAULT       "mtdparts=mxc_nand:50m(root1)," \
+                               "32m(rootfb)," \
+                               "64m(pcache)," \
+                               "64m(app1)," \
+                               "10m(app2),-(spool);" \
                                "physmap-flash.0:512k(u-boot),64k(env1)," \
                                "64k(env2),3776k(kernel1),3776k(kernel2)"
+
 /*
  * FLASH and environment organization
  */
@@ -249,10 +252,10 @@
                "else run addip_sta;fi\0"       \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addtty=setenv bootargs ${bootargs}"                            \
-               " console=ttymxc0,${baudrate}\0"                        \
+               " console=ttymxc2,${baudrate}\0"                        \
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
-       "loadaddr=90800000\0"                                           \
-       "kernel_addr_r=90800000\0"                                      \
+       "loadaddr=80800000\0"                                           \
+       "kernel_addr_r=80800000\0"                                      \
        "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
        "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
        "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"             \