sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / include / configs / gr_ep2s60.h

diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index 7b0a08ff01ded013c6daa93c0c4c3537337dbf0c..5c466f29293f238af790ef61262d13adaff306e8 100644 (file)
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -9,23 +9,7 @@
  * (C) Copyright 2008
  * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
@@ -36,8 +20,6 @@
  * (easy to change)
  */
 
-#define CONFIG_LEON3           /* This is an LEON3 CPU */
-#define CONFIG_LEON            1       /* This is an LEON CPU */
 /* Altera NIOS Development board, Stratix II board */
 #define CONFIG_GR_EP2S60       1
 
@@ -71,8 +53,6 @@
 /*
  * Supported commands
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_AMBAPP
 #define CONFIG_CMD_PING
@@ -115,7 +95,7 @@
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"   \
        "scratch=40800000\0"                                    \
-       "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+       "getkernel=tftpboot $(scratch) $(bootfile)\0" \
        "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \
        ""
 
@@ -123,9 +103,9 @@
 #define CONFIG_GATEWAYIP 192.168.0.1
 #define CONFIG_SERVERIP 192.168.0.20
 #define CONFIG_IPADDR 192.168.0.207
-#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_ROOTPATH "/export/rootfs"
 #define CONFIG_HOSTNAME  ml401
-#define CONFIG_BOOTFILE  /uImage
+#define CONFIG_BOOTFILE "/uImage"
 
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
@@ -229,16 +209,15 @@
 #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
 #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_SDRAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_SDRAM_END - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_PROM_SIZE           (8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_SIZE           (8192-GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_PROM_OFFSET         (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
 #define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_PROM_OFFSET-32)
 #define CONFIG_SYS_STACK_SIZE          (0x10000-32)
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -255,7 +234,7 @@
 #define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
 
 /*
  * Ethernet configuration uses on board SMC91C111, however if a mezzanine
@@ -267,7 +246,7 @@
 #ifndef USE_GRETH
 
 /* USE SMC91C111 MAC */
-#define CONFIG_DRIVER_SMC91111          1
+#define CONFIG_SMC91111          1
 #define CONFIG_SMC91111_BASE           0x20000300      /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1       /* 32 bit bus  */
 #undef  CONFIG_SMC_91111_EXT_PHY       /* we use internal phy   */
@@ -277,26 +256,15 @@
 #else
 
 /* USE GRETH Ethernet Driver */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_GRETH   1
-
-/* Default GRETH Ethernet HARDWARE address */
-#define GRETH_HWADDR_0 0x00
-#define GRETH_HWADDR_1 0x00
-#define GRETH_HWADDR_2 0x7a
-#define GRETH_HWADDR_3 0xcc
-#define GRETH_HWADDR_4 0x00
-#define GRETH_HWADDR_5 0x13
 #endif
 
-#define CONFIG_ETHADDR   00:00:7a:cc:00:13
 #define CONFIG_PHY_ADDR         0x00
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
@@ -311,8 +279,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * USB stuff
  *-----------------------------------------------------------------------