arm: ti: Increase malloc size to 16MB for armv7 boards

[karo-tx-uboot.git] / include / configs / gw8260.h

diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 53a001d21192417f40628310d500cb2e5d3ff0b4..262c9e9e9aa662786a5d4516775f2b2fc9f6f0d4 100644 (file)
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -14,23 +14,7 @@
  * Advent Networks, Inc. <http://www.adventnetworks.com>
  * Oliver Brown <obrown@adventnetworks.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*********************************************************************/
@@ -50,6 +34,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 /* Enable debug prints */
 #undef DEBUG_BOOTP_EXT        /* Debug received vendor fields */
 
@@ -83,7 +69,7 @@
 #define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE.
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
@@ -212,6 +198,11 @@
  * Port pins used for bit-banged MII communictions (if applicable).
  */
 #define MDIO_PORT   2       /* Port C */
+
+#define MDIO_DECLARE   volatile ioport_t *iop = ioport_addr ( \
+                               (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE    MDIO_DECLARE
+
 #define MDIO_ACTIVE    (iop->pdir |=  0x00400000)
 #define MDIO_TRISTATE  (iop->pdir &= ~0x00400000)
 #define MDIO_READ     ((iop->pdat &  0x00400000) != 0)
@@ -233,8 +224,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -246,8 +237,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK3       (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE3      (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -300,7 +291,6 @@
 #define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT      "=> "
 
 
 /*
@@ -324,7 +314,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* What is the address of IO controller */
@@ -336,7 +325,6 @@
  *
  *****************************************************************************/
 
-#define CONFIG_MPC8260      1   /* This is an MPC8260 CPU   */
 #define CONFIG_GW8260       1   /* on an GW8260 Board  */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
@@ -362,7 +350,6 @@
 #define CONFIG_CLOCKS_IN_MHZ
 
 #define CONFIG_SYS_LOAD_ADDR   0x100000 /* default load address */
-#define CONFIG_SYS_HZ          1000     /* decrementer freq: 1 ms ticks */
 
 
 /* memtest works from the end of the exception vector table
@@ -380,9 +367,6 @@
 #define CONFIG_SYS_MEMTEST_END     ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
                            - CONFIG_SYS_MEM_END_USAGE )
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -431,9 +415,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR    CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END     0x4000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE   128 /* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE     0x4000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET   CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -814,13 +797,4 @@
                            ORxG_SCY_11_CLK            |\
                            ORxG_EHTR)
 #endif /* CONFIG_SYS_IO_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot           */
-
 #endif  /* __CONFIG_H */