Merge branch 'master' of /home/stefan/git/u-boot/u-boot

[karo-tx-uboot.git] / include / configs / hcu5.h

diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index fa6ca37534f099733f785b9b1b64b0fd14f775fc..1214bc31b59e6ff6fdab72db72be2c10eaefea0a 100644 (file)
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -43,7 +43,6 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R     1               /* Call misc_init_r     */
-#define CONFIG_ADD_RAM_INFO    1       /* Print additional info        */
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -74,7 +73,6 @@
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache    */
-#define CFG_INIT_RAM_OCM       1               /* OCM as init ram      */
 #define CFG_INIT_RAM_ADDR      CFG_OCM_BASE    /* OCM                  */
 
 #define CFG_INIT_RAM_END       (4 << 10)
@@ -229,44 +227,51 @@
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
-#define CMD_USB                        CFG_CMD_USB
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL        |       \
-                       CFG_CMD_ASKENV  |       \
-                       CFG_CMD_BSP     |       \
-                       CFG_CMD_DHCP    |       \
-                       CFG_CMD_DIAG    |       \
-                       CFG_CMD_EEPROM  |       \
-                       CFG_CMD_ELF     |       \
-                       CFG_CMD_FAT     |       \
-                       CFG_CMD_I2C     |       \
-                       CFG_CMD_IMMAP   |       \
-                       CFG_CMD_IRQ     |       \
-                       CFG_CMD_MII     |       \
-                       CFG_CMD_NET     |       \
-                       CFG_CMD_NFS     |       \
-                       CFG_CMD_PCI     |       \
-                       CFG_CMD_PING    |       \
-                       CFG_CMD_REGINFO |       \
-                       CFG_CMD_SDRAM   |       \
-                       CMD_USB)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_SUPPORT_VFAT
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -359,15 +364,6 @@
 #define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
 #define HCU_HW_VERSION_REGISTER   ( CFG_CPLD + 0x1400000 )
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE                (32<<10)  /* For AMCC 440 CPUs                  */
-#define CFG_CACHELINE_SIZE     32            /* ...                                */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5             /* log base 2 of the above value  */
-#endif
-
 /*
  * Internal Definitions
  *
@@ -381,7 +377,7 @@
        #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 #endif