LG Optimus Black (P970) codename sniper support

[karo-tx-uboot.git] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 2874ccc6fadd2847b98fe5018fb3c6f16479fae7..de9280a3f9a8e886172370c7128314664251401d 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -7,9 +7,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_cmd_default.h>
 
-#define CONFIG_LS102XA
+#define CONFIG_ARMV7_PSCI
 
 #define CONFIG_SYS_GENERIC_BOARD
 
@@ -124,7 +123,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x67f80000
+#define CONFIG_SYS_TEXT_BASE           0x60100000
 #endif
 
 #define CONFIG_NR_DRAM_BANKS           1
@@ -251,7 +250,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -390,6 +388,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /*
  * I2C bus multiplexer
@@ -409,34 +408,54 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-/* QSPI */
+/* SPI */
 #ifdef CONFIG_QSPI_BOOT
+/* QSPI */
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
+#define CONFIG_SPI_FLASH_SPANSION
+
+/* DSPI */
+#define CONFIG_FSL_DSPI
 
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 #define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_DM_SPI_FLASH
+#define CONFIG_SPI_FLASH_DATAFLASH
+#endif
 #endif
 
 /*
  * USB
  */
-#define CONFIG_HAS_FSL_DR_USB
+/* EHCI Support - disbaled by default */
+/*#define CONFIG_HAS_FSL_DR_USB*/
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/*XHCI Support - enabled by default*/
+#define CONFIG_HAS_FSL_XHCI_USB
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT                1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_CMD_EXT2
 #endif
-#endif
 
 /*
  * Video
@@ -510,27 +529,41 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF  0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE      0x00001000      /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF  0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE      0x00001000      /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS         0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF    0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE                0x00010000      /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS                0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF   0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#ifdef CONFIG_QSPI_BOOT
-#undef CONFIG_CMD_IMLS
-#else
-#define CONFIG_CMD_IMLS
-#endif
-
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LS102XA_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ          12500000
-#define CONFIG_ARMV7_SECURE_BASE       OCRAM_BASE_S_ADDR
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
@@ -566,7 +599,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_ENV_EXISTS
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
@@ -632,6 +664,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
+#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif