Move defaults from config_cmd_default.h to Kconfig

[karo-tx-uboot.git] / include / configs / lwmon5.h

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 8f5eb956aeb07f4b1162a6167ed77d8370439639..513167e2ef10bae33afc333b23acf0a63a6d8705 100644 (file)
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -22,7 +22,6 @@
 #define CONFIG_LWMON5          1               /* Board is lwmon5      */
 #define CONFIG_440EPX          1               /* Specific PPC440EPx   */
 #define CONFIG_440             1               /* ... PPC440 family    */
-#define CONFIG_4xx             1               /* ... PPC4xx family    */
 
 #ifdef CONFIG_LCD4_LWMON5
 #define        CONFIG_SYS_TEXT_BASE    0x01000000 /* SPL U-Boot TEXT_BASE */
@@ -429,8 +428,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -441,8 +438,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
@@ -463,7 +458,6 @@
 #define CONFIG_SUPPORT_VFAT
 
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
 
@@ -482,8 +476,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x100000  /* default load address       */
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
@@ -565,6 +557,7 @@
 #define CONFIG_SYS_GPIO_PHY1_RST       12
 #define CONFIG_SYS_GPIO_FLASH_WP       14
 #define CONFIG_SYS_GPIO_PHY0_RST       22
+#define CONFIG_SYS_GPIO_PERM_VOLT_FEED 49
 #define CONFIG_SYS_GPIO_DSPIC_READY    51
 #define CONFIG_SYS_GPIO_CAN_ENABLE     53
 #define CONFIG_SYS_GPIO_LSB_ENABLE     54
@@ -577,6 +570,13 @@
 #define CONFIG_SYS_GPIO_SYSMON_STATUS  62
 #define CONFIG_SYS_GPIO_WATCHDOG       63
 
+/* On LCD4, GPIO49 has to be configured to 0 instead of 1 */
+#ifdef CONFIG_LCD4_LWMON5
+#define GPIO49_VAL     0
+#else
+#define GPIO49_VAL     1
+#endif
+
 /*
  * PPC440 GPIO Configuration
  */
@@ -635,7 +635,7 @@
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)    DMA_REQ(0)      */      \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)    DMA_ACK(0)      */      \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)    DMA_EOT/TC(0)   */      \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49  Unselect via TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO49_VAL}, /* GPIO49  Unselect via TraceSelect Bit */      \
 {GPIO1_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit */      \
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit */      \
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit */      \
@@ -655,22 +655,18 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 #endif
 
 /*
  * SPL related defines
  */
 #ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NOR_SUPPORT
 #define CONFIG_SPL_TEXT_BASE           0xffff0000 /* last 64 KiB for SPL */
 #define CONFIG_SYS_SPL_MAX_LEN         (64 << 10)
 #define CONFIG_UBOOT_PAD_TO            458752  /* decimal for 'dd' */
-#define        CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx"
-#define CONFIG_SPL_LDSCRIPT    "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT   /* image.c */
 #define CONFIG_SPL_LIBGENERIC_SUPPORT  /* string.c */
 #define CONFIG_SPL_SERIAL_SUPPORT