sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / include / configs / mecp5123.h

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index f5765b0d4e18997137b6e96afb3c37ef80c84f18..a8b4b24470a4cdc52c31fb80d28bb705154f36a1 100644 (file)
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -2,24 +2,7 @@
  * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
  * (C) Copyright 2009, DAVE Srl <www.dave.eu>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  * modifications for the MECP5123 by reinhard.arlt@esd-electronics.com
  *
  */
@@ -32,6 +15,9 @@
 #define __CONFIG_H
 
 #define CONFIG_MECP5123 1
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
  * Memory map for the MECP5123 board:
  *
@@ -46,7 +32,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC512X         1       /* MPC512X family */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
@@ -191,6 +176,10 @@
 #define CONFIG_SYS_SRAM_BASE           0x30000000
 #define CONFIG_SYS_SRAM_SIZE           0x00020000      /* 128 KB */
 
+/* Initialize Local Window for NOR FLASH access */
+#define CONFIG_SYS_CS0_START           CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
+
 /* ALE active low, data size 4bytes */
 #define CONFIG_SYS_CS0_CFG             0x05051150
 
@@ -201,6 +190,9 @@
 #define CONFIG_SYS_CS1_CFG             0x1f1f3090
 #define CONFIG_SYS_VPC3_BASE           0x82000000      /* start of VPC3 space */
 #define CONFIG_SYS_VPC3_SIZE           0x00010000      /* max VPC3 size */
+/* Initialize Local Window for VPC3 access */
+#define CONFIG_SYS_CS1_START           CONFIG_SYS_VPC3_BASE
+#define CONFIG_SYS_CS1_SIZE            CONFIG_SYS_VPC3_SIZE
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE /* Init RAM addr */
@@ -222,6 +214,7 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     3       /* console is on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -234,16 +227,31 @@
 #define CONSOLE_FIFO_RX_SIZE   FIFOC_PSC3_RX_SIZE
 #define CONSOLE_FIFO_RX_ADDR   FIFOC_PSC3_RX_ADDR
 
+/*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
+                        CLOCK_SCCR1_DDR_EN |                           \
+                        CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_NFC_EN |                           \
+                        CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_MEM_EN |   \
+                        CLOCK_SCCR2_I2C_EN)
+
+
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* I2C */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C                 /* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed */
 #define CONFIG_SYS_I2C_SLAVE           0x7F    /* slave address */
@@ -251,7 +259,7 @@
 /*
  * IIM - IC Identification Module
  */
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
 
 /*
  * EEPROM configuration
@@ -288,13 +296,10 @@
 #define CONFIG_LOADS_ECHO              /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
@@ -321,7 +326,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_SYS_CBSIZE     1024            /* Console I/O Buffer Size */
@@ -337,8 +341,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HZ          1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -361,7 +363,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*