arm/rpi: Enable dcache

[karo-tx-uboot.git] / include / configs / mx31ads.h

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index adb2ee1ce9a8dc630fb7640dd027ffd15ac723a8..c60a781d321b08b807e3cef735eae142341935fb 100644 (file)
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -3,20 +3,7 @@
  *
  * Configuration settings for the MX31ADS Freescale board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -25,16 +12,18 @@
 #include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
-#define CONFIG_ARM1136         1               /* This is an arm1136 CPU core */
-#define CONFIG_MX31            1               /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ  26000000        /* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32      32768
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_SYS_TEXT_BASE           0xA0000000
 
+#define CONFIG_MACH_TYPE       MACH_TYPE_MX31ADS
+
 /*
  * Disabled for now due to build problems under Debian and a significant increase
  * in the final file size: 144260 vs. 109536 Bytes.
@@ -58,8 +47,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART        1
-#define CONFIG_SYS_MX31_UART1          1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE   UART1_BASE
 
 #define CONFIG_HARD_SPI                1
 #define CONFIG_MXC_SPI         1
@@ -67,25 +56,25 @@
 #define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_MXC_GPIO
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS    1
 #define CONFIG_FSL_PMIC_CS     0
 #define CONFIG_FSL_PMIC_CLK    1000000
 #define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783     1
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
  ***********************************************************/
-
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
@@ -113,7 +102,6 @@
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}; "          \
                "setenv filesize; saveenv\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900
 #define CONFIG_CS8900_BASE     0xb4020300
 #define CONFIG_CS8900_BUS16            1       /* follow the Linux driver */
@@ -134,7 +122,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -146,17 +133,8 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_CMDLINE_EDITING 1
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */