Move defaults from config_cmd_default.h to Kconfig

[karo-tx-uboot.git] / include / configs / mx35pdk.h

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index a25b20e4af2c7a4308495b119960b93af4df1d46..e2702ade73ed7e73465b01c29df6363eb4e77543 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -7,7 +7,7 @@
  *
  * Configuration for the MX35pdk Freescale board.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,10 +16,9 @@
 #include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX35
 
 #define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Set TEXT at the beginning of the NOR flash */
 #define CONFIG_SYS_TEXT_BASE   0xA0000000
@@ -40,10 +39,9 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE            I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
@@ -54,7 +52,7 @@
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR   0x08
 #define CONFIG_RTC_MC13XXX
 
@@ -78,9 +76,6 @@
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_PING
@@ -95,7 +90,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_NET_RETRY_COUNT 100
 #define CONFIG_CMD_DATE
 
@@ -136,26 +130,19 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT      "MX35 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
 
-#undef CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ                          1000
-
 /*
  * Physical Memory Map
  */