config: rename CONFIG_MX* to CONFIG_SOC_MX*

[karo-tx-uboot.git] / include / configs / mx6sabresd.h

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 76675f41364178005dac58ea7937ece6c1d3b06f..d477bb206b9297309fd24555c9dbfb69f4eb6799 100644 (file)
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -3,27 +3,32 @@
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __MX6QSABRESD_CONFIG_H
 #define __MX6QSABRESD_CONFIG_H
 
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
 #define CONFIG_MACH_TYPE       3980
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 #define CONFIG_CONSOLE_DEV             "ttymxc0"
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"
 #define CONFIG_DEFAULT_FDT_FILE        "imx6q-sabresd.dtb"
+#define CONFIG_DEFAULT_FDT_FILE        "imx6dl-sabresd.dtb"
+#endif
 #define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
 #include "mx6sabre_common.h"
 
 #define CONFIG_SYS_FSL_USDHC_NUM       3
@@ -31,4 +36,40 @@
 #define CONFIG_SYS_MMC_ENV_DEV         1       /* SDHC3 */
 #endif
 
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
+#define CONFIG_PCIE_IMX_POWER_GPIO     IMX_GPIO_NR(3, 19)
+#endif
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED             100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS           0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */
+#endif
+
 #endif                         /* __MX6QSABRESD_CONFIG_H */