karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 1eda65e0818c5323a2d0c48094f5916affd5d730..778588850452f5b3c51878d78fd6c8037848f813 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -10,45 +10,22 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
 #include "mx6_common.h"
 
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SYS_GENERIC_BOARD
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* Command definition */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x80800000
-#define CONFIG_SYS_TEXT_BASE           0x87800000
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
@@ -59,9 +36,9 @@
        "fdt_addr=0x88000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "mmcdev=0\0" \
+       "mmcdev=2\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "mmcroot=/dev/mmcblk3p2 rootwait rw\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
                "root=${mmcroot}\0" \
        "loadbootscript=" \
@@ -124,22 +101,9 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              1024
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             256
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
@@ -157,22 +121,13 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* MMC Configuration */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
 /* PMIC */
@@ -185,7 +140,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 
@@ -198,19 +152,57 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_OFFSET              (6 * SZ_64K)
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(2, 0)
+#define CONFIG_PCIE_IMX_POWER_GPIO     IMX_GPIO_NR(2, 1)
+#endif
+
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_TIME
+
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SYS_FSL_QSPI_LE
+#define CONFIG_SYS_FSL_QSPI_AHB
+#ifdef CONFIG_MX6SX_SABRESD_REVA
+#define FSL_QSPI_FLASH_SIZE            SZ_16M
+#else
+#define FSL_QSPI_FLASH_SIZE            SZ_32M
+#endif
+#define FSL_QSPI_FLASH_NUM             2
+#endif
+
+#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
 #define CONFIG_ENV_SIZE                        SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_FSL_USDHC_NUM       3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV         2  /*USDHC4*/
 #endif
 
 #endif                         /* __CONFIG_H */