karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / novena.h

diff --git a/include/configs/novena.h b/include/configs/novena.h
index ea75d2c2b97e3fe03256197cce8b6214c40d2d29..0970fd75483e7ab9628bd76ff163bc0532587436 100644 (file)
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -10,67 +10,33 @@
 #define __CONFIG_H
 
 /* System configurations */
-#define CONFIG_MX6
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
 #define CONFIG_FIT
 #define CONFIG_KEYBOARD
-#define CONFIG_MXC_GPIO
-#define CONFIG_OF_LIBFDT
-#define CONFIG_REGEX
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_NO_FLASH
 
-#include "configs/mx6_common.h"
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-#include <config_cmd_default.h>
+#include "mx6_common.h"
 
 /* U-Boot Commands */
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_FUSE
+#define CONFIG_FAT_WRITE
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SATA
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_TIME
 #define CONFIG_CMD_USB
 #define CONFIG_VIDEO
 
 /* U-Boot general configurations */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE      \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-                                               /* Print buffer size */
-#define CONFIG_SYS_MAXARGS     32              /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-                                               /* Boot argument buffer size */
 #define CONFIG_VERSION_VARIABLE                        /* U-BOOT version */
-#define CONFIG_AUTO_COMPLETE                   /* Command auto complete */
-#define CONFIG_CMDLINE_EDITING                 /* Command history etc */
-#define CONFIG_SYS_HUSH_PARSER
 
 /* U-Boot environment */
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_SIZE                        (16 * 1024)
 /*
  * Environment is on MMC, starting at offset 512KiB from start of the card.
@@ -90,12 +56,9 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY               5
 #define CONFIG_BOOTFILE                        "fitImage"
 #define CONFIG_BOOTARGS                        "console=ttymxc1,115200 "
 #define CONFIG_BOOTCOMMAND             "run net_nfs"
-#define CONFIG_LOADADDR                        0x18000000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_HOSTNAME                        novena
 
 /* Physical Memory Map */
@@ -116,18 +79,12 @@
 #define CONFIG_SYS_MEMTEST_END         0x20000000
 
 #define CONFIG_SYS_MALLOC_LEN          (64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 /* SPL */
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Ethernet Configuration */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
@@ -145,6 +102,7 @@
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
@@ -156,20 +114,8 @@
 #endif
 
 /* MMC Configs */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
-#endif
-
-/* OCOTP Configs */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
 
 /* PCI express */
 #ifdef CONFIG_CMD_PCI
@@ -200,8 +146,6 @@
 /* UART */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART2_BASE
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_CONS_INDEX              1
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB