ti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT

[karo-tx-uboot.git] / include / configs / omap3_igep00x0.h

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 79daabd6bbff5a5165a308507b62c100abbe3ab4..04433edcc543c6fba908294bcfcb2d3e27e4df40 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -29,12 +29,23 @@
 
 #define CONFIG_REVISION_TAG            1
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
+#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
+#else
+#error "status LED not defined for this machine."
+#endif
+#define RED_LED_DEV                            0
+#define STATUS_LED_BIT                 RED_LED_GPIO
+#define STATUS_LED_STATE               STATUS_LED_ON
+#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT                        RED_LED_DEV
 #endif
 
 /* GPIO banks */
@@ -43,7 +54,7 @@
 #define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
 
 /* USB */
-#define CONFIG_MUSB_UDC                        1
+#define CONFIG_USB_MUSB_UDC                    1
 #define CONFIG_USB_OMAP3               1
 #define CONFIG_TWL4030_USB             1
 
@@ -64,11 +75,9 @@
 #endif
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
-#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
 #endif
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_NFS         /* NFS support                  */
 
 /*#undef CONFIG_ENV_IS_NOWHERE*/
 
@@ -146,8 +155,6 @@
  */
 
 #ifdef CONFIG_BOOT_ONENAND
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M /* Configure the PISMO */
-
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
 #define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
@@ -158,7 +165,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M /* Configure the PISMO */
 #define CONFIG_ENV_OFFSET              0x260000 /* environment starts here */
 #define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_SIZE                        (512 << 10) /* Total Size Environment */
@@ -187,7 +193,7 @@
 
 /* NAND boot config */
 #ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -199,6 +205,13 @@
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       3
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS                0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
+#endif
 #endif
 
 #endif /* __IGEP00X0_H */