Move defaults from config_cmd_default.h to Kconfig

[karo-tx-uboot.git] / include / configs / omap5_uevm.h

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e792b1b5c70ca3304a586508ab950e61326a7cee..86479213fc8b7227430fbbb944ffe88e029fc754 100644 (file)
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -4,56 +4,79 @@
  * Sricharan R   <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_OMAP5_EVM_H
 #define __CONFIG_OMAP5_EVM_H
 
+#ifndef CONFIG_SPL_BUILD
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
        "uuid_disk=${uuid_gpt_disk};" \
        "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+#endif
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 #define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE
 #define CONFIG_BAUDRATE                        115200
 
+#define CONFIG_MISC_INIT_R
 /* MMC ENV related defines */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_SIZE                        (128 << 10)
 #define CONFIG_ENV_OFFSET              0xE0000
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* Required support for the TCA642X GPIO we have on the uEVM */
+#define CONFIG_TCA642X
+#define CONFIG_CMD_TCA642X
+#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
+#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_SYS_PROMPT              "OMAP5432 uEVM # "
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
+#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
 
+/* Enabled commands */
+#define CONFIG_CMD_DHCP                /* DHCP Support                 */
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONSOLEDEV             "ttyO2"
+
+/* Max time to hold reset on this board, see doc/README.omap-reset-time */
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC       16296
+
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                               CONFIG_SYS_SCSI_MAX_LUN)
+
 #endif /* __CONFIG_OMAP5_EVM_H */