Merge branch 'master' of git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 117484da8726ac6e6301efc411468fca70debfe4..9b5895093daa255193ee36f1dce1744aee9f09f2 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -10,6 +10,9 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
@@ -145,7 +148,6 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -159,12 +161,12 @@
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
-#define CONFIG_SPL_PAD_TO              0x18000
-#define CONFIG_SPL_MAX_SIZE            (96 * 1024)
+#define CONFIG_SPL_PAD_TO              0x20000
+#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_START    (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS     (96 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS     (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_MMC_BOOT
@@ -174,7 +176,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -189,12 +190,12 @@
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
-#define CONFIG_SPL_PAD_TO              0x18000
-#define CONFIG_SPL_MAX_SIZE            (96 * 1024)
+#define CONFIG_SPL_PAD_TO              0x20000
+#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (96 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_SPI_BOOT
@@ -204,8 +205,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -508,7 +507,7 @@
                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN  (1024 * 1024)/* Reserved for malloc */
 
 #define CONFIG_SYS_CPLD_BASE   0xffa00000
@@ -579,11 +578,15 @@
 #define CONFIG_SYS_INIT_L2_ADDR_PHYS   CONFIG_SYS_INIT_L2_ADDR
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE     0xf8f81000
-#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE    (32 << 10)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE   (96 << 10)
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
+#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE    (32 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
+#if defined(CONFIG_P2020RDB)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE   (364 << 10)
+#else
+#define CONFIG_SPL_RELOC_MALLOC_SIZE   (108 << 10)
+#endif
 #elif defined(CONFIG_NAND)
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SYS_INIT_L2_ADDR                0xf8f80000
@@ -768,7 +771,7 @@
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xefec0000
+#define CONFIG_SYS_QE_FW_ADDR  0xefec0000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #endif /* CONFIG_QE */
 
@@ -879,6 +882,10 @@
 #endif
 #endif
 
+#if defined(CONFIG_P1020RDB_PD)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
+#endif
+
 #define CONFIG_MMC
 
 #ifdef CONFIG_MMC