Merge with /home/hs/Atronic/u-boot

[karo-tx-uboot.git] / include / configs / pcs440ep.h

diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 751b51277cefb885a768ceca2726842f39e32b96..0e83e4881a421ed649b826051017ee6ad519e4ec 100644 (file)
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -106,19 +106,26 @@
 #ifdef CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_SECT_SIZE      0x10000 /* size of one complete sector          */
 #define CFG_ENV_ADDR           (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define        CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
+#define CFG_ENV_SIZE           0x2000  /* Total Size of Environment Sector     */
+
+#define CONFIG_ENV_OVERWRITE   1
 
 /* Address and size of Redundant Environment Sector    */
 #define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND    (CFG_ENV_SIZE)
 #endif /* CFG_ENV_IS_IN_FLASH */
 
+#define ENV_NAME_REVLEV        "revision_level"
+#define ENV_NAME_SOLDER        "solder_switch"
+#define ENV_NAME_DIP   "dip"
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
 #undef CONFIG_DDR_ECC                  /* don't use ECC                        */
 #define SPD_EEPROM_ADDRESS      {0x50}
+#define        CONFIG_PROG_SDRAM_TLB   1
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -143,6 +150,8 @@
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "hostname=pcs440ep\0"                                           \
+       "use_eeprom_ethaddr=default\0"                                  \
+       "cs_test=off\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=${serverip}:${rootpath}\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
@@ -173,6 +182,36 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 #endif
 
+#define CONFIG_PREBOOT "echo;" \
+       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo"
+
+/* check U-Boot image with SHA1 sum */
+#define CONFIG_SHA1_CHECK_UB_IMG       1
+#define CONFIG_SHA1_START              CFG_MONITOR_BASE
+#define CONFIG_SHA1_LEN                        CFG_MONITOR_LEN
+
+/*-----------------------------------------------------------------------
+ * Definitions for status LED
+ */
+#define CONFIG_STATUS_LED      1       /* Status LED enabled           */
+#define CONFIG_BOARD_SPECIFIC_LED      1
+
+#define STATUS_LED_BIT         0x08                    /* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_PERIOD      ((CFG_HZ / 2) / 5)      /* blink at 5 Hz */
+#define STATUS_LED_STATE       STATUS_LED_OFF
+#define STATUS_LED_BIT1                0x04                    /* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_PERIOD1     ((CFG_HZ / 2) / 5)      /* blink at 5 Hz */
+#define STATUS_LED_STATE1      STATUS_LED_ON
+#define STATUS_LED_BIT2                0x02                    /* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_PERIOD2     ((CFG_HZ / 2) / 5)      /* blink at 5 Hz */
+#define STATUS_LED_STATE2      STATUS_LED_OFF
+#define STATUS_LED_BIT3                0x01                    /* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_PERIOD3     ((CFG_HZ / 2) / 5)      /* blink at 5 Hz */
+#define STATUS_LED_STATE3      STATUS_LED_OFF
+
+#define CONFIG_SHOW_BOOT_PROGRESS      1
+
 #define CONFIG_BAUDRATE                115200
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
@@ -214,7 +253,10 @@
                                CFG_CMD_DIAG    | \
                                CFG_CMD_EEPROM  | \
                                CFG_CMD_ELF     | \
+                               CFG_CMD_EXT2    | \
+                               CFG_CMD_FAT     | \
                                CFG_CMD_I2C     | \
+                               CFG_CMD_IDE     | \
                                CFG_CMD_IRQ     | \
                                CFG_CMD_MII     | \
                                CFG_CMD_NET     | \
@@ -222,9 +264,8 @@
                                CFG_CMD_PCI     | \
                                CFG_CMD_PING    | \
                                CFG_CMD_REGINFO | \
+                               CFG_CMD_REISER  | \
                                CFG_CMD_SDRAM   | \
-                               CFG_CMD_EXT2    | \
-                               CFG_CMD_FAT     | \
                                CFG_CMD_USB     )
 
 
@@ -410,4 +451,39 @@
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
+
+#undef  CONFIG_IDE_8xx_DIRECT          /* Direct IDE    not supported  */
+#undef  CONFIG_IDE_LED                 /* LED   for ide not supported  */
+
+#define CFG_IDE_MAXBUS         1       /* max. 1 IDE bus               */
+#define CFG_IDE_MAXDEVICE      1       /* max. 2 drives per IDE bus    */
+
+#define CONFIG_IDE_PREINIT     1
+#define CONFIG_IDE_RESET       1
+
+#define CFG_ATA_IDE0_OFFSET    0x0000
+
+#define CFG_ATA_BASE_ADDR      CFG_CF1
+
+/* Offset for data I/O                 */
+#define CFG_ATA_DATA_OFFSET    0
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET     (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers      */
+#define CFG_ATA_ALT_OFFSET     (0x0000)
+
+/* This addresses need to be shifted one place to the left
+ * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
+ * This values are shifted 
+ */
+#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
+
 #endif /* __CONFIG_H */