kconfig: add config option for shell prompt

[karo-tx-uboot.git] / include / configs / pm9g45.h

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 460933f79da24e8e3e667f49646eba9d01787027..09f0744b4100b43009589f1cc8946e53a8dd3fa0 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -10,23 +10,7 @@
  *
  * Configuation settings for the PM9G45 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -38,6 +22,8 @@
  */
 #include <asm/hardware.h>
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
 #define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9G45"
 
@@ -47,7 +33,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_TEXT_BASE           0x73f00000
 
 #define CONFIG_ARCH_CPU_INIT
@@ -71,8 +56,8 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define        CONFIG_GREEN_LED        AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED         GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED       GPIO_PIN_PD(0)  /* this is the user2 led */
 
 #define CONFIG_BOOTDELAY       3
 
@@ -87,10 +72,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
@@ -111,7 +92,6 @@
 
 /* NOR flash, not available */
 #define CONFIG_SYS_NO_FLASH            1
-#undef CONFIG_CMD_FLASH
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -123,8 +103,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN      AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN     GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN      GPIO_PIN_PD(3)
 
 #endif
 
@@ -136,6 +116,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT   1
@@ -168,7 +149,6 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \