omap3: overo: Select fdtfile for expansion board

[karo-tx-uboot.git] / include / configs / quad100hd.h

diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 5d0c3859877ca0a91354d312e53c5679744cda31..e91e805bb974c56623825bc735e9e711598b957c 100644 (file)
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2008
  * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /************************************************************************
@@ -31,7 +15,6 @@
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
 #define CONFIG_QUAD100HD       1               /* Board is Quad100hd   */
-#define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_405EP           1               /* Specifc 405EP support*/
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
@@ -113,7 +96,6 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK                     /* external serial clock */
 #define CONFIG_SYS_BASE_BAUD           691200
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI
 
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      \
@@ -123,7 +105,6 @@
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
@@ -139,8 +120,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x100000  /* default load address       */
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_info (bd_t) */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
@@ -153,11 +132,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C                1               /* I2C with hardware support    */
-#undef CONFIG_SOFT_I2C                         /* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50            /* base address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2               /* bytes of address */
@@ -285,7 +264,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif
 
 /* ENVIRONMENT VARS */