arm: mx5: clock: add support for changing CPU clock via cmdline

[karo-tx-uboot.git] / include / configs / r2dplus.h

diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 6921759d5549429c7655fbaebd52c11a5d340aed..65dcffb29be495ea88b83f12a2626cdb803aebdc 100644 (file)
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -15,7 +15,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_DFL
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_PCI
@@ -24,12 +23,13 @@
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_SH_ZIMAGEBOOT
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE    1
 #define CONFIG_BAUDRATE                115200
 #define CONFIG_CONS_SCIF1      1
-#define BOARD_LATE_INIT                1
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY       -1
 #define CONFIG_BOOTARGS                "console=ttySC0,115200"
@@ -39,17 +39,16 @@
 #define CONFIG_SYS_SDRAM_BASE          (0x8C000000)
 #define CONFIG_SYS_SDRAM_SIZE          (0x04000000)
 
+#define CONFIG_SYS_TEXT_BASE   0x0FFC0000
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_PBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE            512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END         (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
 
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
@@ -57,8 +56,6 @@
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       (256)
 #define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
 
 /*
@@ -80,8 +77,8 @@
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ    60000000
-#define TMU_CLK_DIVIDER                4
-#define CONFIG_SYS_HZ                  (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV         4
+#define CONFIG_SYS_HZ          1000
 #define        CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
 
 /*
@@ -96,6 +93,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x1000  /* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x1000  /* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x800   /* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 
 /*
  * SuperH PCI Bridge Configration
@@ -114,13 +112,13 @@
 #define CONFIG_PCI_IO_BUS      0xFE240000      /* IO space base address */
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x00040000      /* Size of IO window */
+#define CONFIG_PCI_SYS_BUS     (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
+#define CONFIG_PCI_SYS_PHYS    (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
+#define CONFIG_PCI_SYS_SIZE    CONFIG_SYS_SDRAM_SIZE
 
 /*
  * Network device (RTL8139) support
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
-#define _IO_BASE               0x00000000
-#define KSEG1ADDR(x)           (x)
 
 #endif /* __CONFIG_H */