* (C) Copyright 2008
* Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1 /* ... PPC460 family */
#define CONFIG_460SX 1 /* ... PPC460 family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_SYS_TEXT_BASE 0xfffb0000
+
/*-----------------------------------------------------------------------
* Include common defines/options for all AMCC boards
*----------------------------------------------------------------------*/
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
-#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
-#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
+#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */
+#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */
-#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-#define CFG_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
-#define CFG_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */
-#define CFG_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */
-#define CFG_PCIE_MEMSIZE 0x01000000
+#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
+#define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */
+#define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */
+#define CONFIG_SYS_PCIE_MEMSIZE 0x01000000
-#define CFG_PCIE0_XCFGBASE 0xb0000000
-#define CFG_PCIE1_XCFGBASE 0xb2000000
-#define CFG_PCIE2_XCFGBASE 0xb4000000
-#define CFG_PCIE0_CFGBASE 0xb6000000
-#define CFG_PCIE1_CFGBASE 0xb8000000
-#define CFG_PCIE2_CFGBASE 0xba000000
+#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000
+#define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000
+#define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000
+#define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000
+#define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000
+#define CONFIG_SYS_PCIE2_CFGBASE 0xba000000
/* PCIe mapped UTL registers */
-#define CFG_PCIE0_REGBASE 0xd0000000
-#define CFG_PCIE1_REGBASE 0xd0010000
-#define CFG_PCIE2_REGBASE 0xd0020000
+#define CONFIG_SYS_PCIE0_REGBASE 0xd0000000
+#define CONFIG_SYS_PCIE1_REGBASE 0xd0010000
+#define CONFIG_SYS_PCIE2_REGBASE 0xd0020000
/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-#define CFG_FPGA_BASE 0xe2000000 /* epld */
-#define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
+#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */
+#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1 /* Use UART0 */
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
*----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM 1
-#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* DDR SDRAM
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define CONFIG_DDR_ECC 1 /* with ECC support */
-#define CFG_SPD_MAX_DIMMS 2
+#define CONFIG_SYS_SPD_MAX_DIMMS 2
/* SPD i2c spd addresses */
#define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED 400000 /* I2C speed */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
#define IIC0_BOOTPROM_ADDR 0x50
#define IIC0_ALT_BOOTPROM_ADDR 0x54
/* Don't probe these addrs */
-#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
+#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
-#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
+#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_PREBOOT "echo;" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
- CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=fc000000\0" \
"fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
-#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
-#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
-#define CFG_ENV_ADDR 0xfffa0000
-#define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR 0xfffa0000
+#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */
+#endif /* CONFIG_ENV_IS_IN_FLASH */
/*---------------------------------------------------------------------------*/
projects / karo-tx-uboot.git / blobdiff