sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / include / configs / seaboard.h

diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index f66173e0f23bffac173e45e5dec7a53a8cdc55a7..fdeffb5ab3d87684b5203af61a8f468ef09d3533 100644 (file)
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -2,29 +2,13 @@
  *  (C) Copyright 2010,2011
  *  NVIDIA Corporation <www.nvidia.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 /* LP0 suspend / resume */
 #define CONFIG_TEGRA_LP0
@@ -35,11 +19,6 @@
 
 #include "tegra20-common.h"
 
-/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE     tegra20-seaboard
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
-
 /* High-level configuration options */
 #define V_PROMPT               "Tegra20 (SeaBoard) # "
 #define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Seaboard"
@@ -48,20 +27,10 @@
 #define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTD_BASE
 
-/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
-#define CONFIG_UART_DISABLE_GPIO       GPIO_PI3
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_SEABOARD
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT         /* Make sure LCD init is complete */
-
 /* I2C */
-#define CONFIG_TEGRA_I2C
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS         4
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_CMD_I2C
 
 /* SD/MMC */
@@ -72,7 +41,7 @@
 
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #define CONFIG_SYS_MMC_ENV_PART 2
 
@@ -88,7 +57,6 @@
 #define CONFIG_USB_ETHER_ASIX
 
 /* General networking support */
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
 /* Enable keyboard */