rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

[karo-tx-uboot.git] / include / configs / svm_sc8xx.h

diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 92ee8cb3331f961cdceb467ae582928292ec7f3e..b7831b4473ebd2319b0f011b4562a845260e929c 100644 (file)
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -68,7 +68,7 @@
 
 #undef CONFIG_WATCHDOG                 /* watchdog */
 
-#define CONFIG_SVM_SC8xx               1       /* ...on SVM SC8xx series       */
+#define CONFIG_SVM_SC8xx               1       /* ...on SVM SC8xx series       */
 
 #ifdef CONFIG_LCD                      /* with LCD controller ?        */
 /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display      */
@@ -109,8 +109,8 @@
        "ramdisk_addr=48100000\0"                                       \
        ""
 #define CONFIG_BOOTCOMMAND                                                     \
-       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
-       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
+       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
        "tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
@@ -125,23 +125,33 @@
 
 #undef CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
 
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DOC     | \
-/*                             CFG_CMD_IDE     |*/ \
-                               CFG_CMD_DATE    )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_DATE
+
+
+#define CONFIG_NAND_LEGACY
 
 /*
  * Miscellaneous configurable options
@@ -153,7 +163,7 @@
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -217,7 +227,7 @@
 #define CFG_FLASH_ERASE_TOUT   120000  /* Timeout for Flash Erase (in ms)      */
 #define CFG_FLASH_WRITE_TOUT   500     /* Timeout for Flash Write (in ms)      */
 
-#define        CFG_ENV_IS_IN_FLASH     1
+#define        CONFIG_ENV_IS_IN_FLASH  1
 
 #ifdef CONFIG_BOOT_8B
 #define        CFG_ENV_OFFSET          0x10000 /*   Offset   of Environment Sector     */
@@ -246,7 +256,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
@@ -353,14 +363,14 @@
  *-----------------------------------------------------------------------
  */
 
-#undef CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 
 #define        CONFIG_IDE_8xx_DIRECT   1       /* Direct IDE    not supported  */
 #undef CONFIG_IDE_LED                  /* LED   for ide not supported  */
 #undef CONFIG_IDE_RESET                /* reset for ide not supported  */
 
 #define CFG_IDE_MAXBUS         1       /* max. 1 IDE bus               */
-#define CFG_IDE_MAXDEVICE      1       /* max. 1 drive per IDE bus     */
+#define CFG_IDE_MAXDEVICE      1       /* max. 1 drive per IDE bus     */
 
 #define CFG_ATA_BASE_ADDR       0xFE100010
 #define CFG_ATA_IDE0_OFFSET     0x0000