#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x10502000
/* USB Composite download gadget - g_dnl */
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_DFU_FUNCTION
#define CONFIG_DFU_MMC
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
/* Tizen - partitions definitions */
#define PARTS_CSA "csa"
#define PARTS_BOOT "boot"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
"u-boot mmc 80 800;" \
"uImage ext4 0 2;" \
"exynos4412-trats2.dtb ext4 0 2;" \
- ""PARTS_ROOT" part 0 5\0"
+ ""PARTS_BOOT" part 0 2;" \
+ ""PARTS_ROOT" part 0 5;" \
+ ""PARTS_DATA" part 0 6;" \
+ ""PARTS_UMS" part 0 7;" \
+ "params.bin mmc 0x38 0x8\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
- "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
+ "run loaduimage;" \
+ "if run loaddtb; then " \
+ "bootm 0x40007FC0 - ${fdtaddr};" \
+ "fi;" \
+ "bootm 0x40007FC0;\0" \
"updatemmc=" \
"mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
- "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
+ "run bootk\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
- "mmcdev=CONFIG_MMC_DEFAULT_DEV\0" \
+ "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
"fdtaddr=40800000\0" \
- "fdtfile=exynos4412-trats2.dtb\0"
/*
* Miscellaneous configurable options
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
-#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */
#include <asm/arch/gpio.h>
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
+#define CONFIG_MAX_I2C_NUM 8
+#define CONFIG_SYS_I2C_SOFT
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
#define I2C_SOFT_DECLARATIONS2
#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
-#define I2C_SOFT_DECLARATIONS3
-#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x00
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SOFT_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 15
-
-#define CONFIG_SOFT_I2C_I2C5_SCL exynos4x12_gpio_part1_get_nr(d0, 3)
-#define CONFIG_SOFT_I2C_I2C5_SDA exynos4x12_gpio_part1_get_nr(d0, 2)
-#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_part1_get_nr(f1, 4)
-#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_part1_get_nr(f1, 5)
-#define CONFIG_SOFT_I2C_I2C10_SCL exynos4x12_gpio_part2_get_nr(m2, 1)
-#define CONFIG_SOFT_I2C_I2C10_SDA exynos4x12_gpio_part2_get_nr(m2, 0)
-#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin()
-#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
-#define I2C_INIT multi_i2c_init()
+
+#ifndef __ASSEMBLY__
+int get_soft_i2c_scl_pin(void);
+int get_soft_i2c_sda_pin(void);
+#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
+#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()
/* POWER */
#define CONFIG_POWER
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_USB_CABLE_CHECK
+/* Common misc for Samsung */
+#define CONFIG_MISC_COMMON
+
+#define CONFIG_MISC_INIT_R
+
+/* Download menu - Samsung common */
+#define CONFIG_LCD_MENU
+#define CONFIG_LCD_MENU_BOARD
+
+/* Download menu - definitions for check keys */
+#ifndef __ASSEMBLY__
+#include <power/max77686_pmic.h>
+
+#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
+#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1
+#define KEY_PWR_STATUS_MASK (1 << 0)
+#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
+#define KEY_PWR_INTERRUPT_MASK (1 << 1)
+
+#define KEY_VOL_UP_GPIO exynos4x12_gpio_get(2, x2, 2)
+#define KEY_VOL_DOWN_GPIO exynos4x12_gpio_get(2, x3, 3)
+#endif /* __ASSEMBLY__ */
+
+/* LCD console */
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+
/* LCD */
#define CONFIG_EXYNOS_FB
#define CONFIG_LCD
#define CONFIG_CMD_BMP
-#define CONFIG_BMP_32BPP
+#define CONFIG_BMP_16BPP
#define CONFIG_FB_ADDR 0x52504000
#define CONFIG_S6E8AX0
#define CONFIG_EXYNOS_MIPI_DSIM
#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
projects / karo-tx-uboot.git / blobdiff