arm/rpi: Enable dcache

[karo-tx-uboot.git] / include / configs / versatile.h

diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 32cee824bb64132a1de1b2e5d14b9a2d4f40a407..de23375cd5eacaaae7e0a14916ca8215c11a0b13 100644 (file)
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -9,23 +9,7 @@
  * Philippe Robin, <philippe.robin@arm.com>
  * Configuration for Versatile PB.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,22 +19,16 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM926EJS       1       /* This is an arm926ejs CPU core */
-#define CONFIG_VERSATILE       1       /* in Versatile Platform Board  */
+#define CONFIG_VERSATILE       1       /* This is Versatile Platform Board     */
 #define CONFIG_ARCH_VERSATILE  1       /* Specifically, a Versatile    */
 
-#ifndef CONFIG_ARCH_VERSATILE_AB       /* AB                           */
-#define CONFIG_ARCH_VERSATILE_PB       /* Versatile PB is default      */
-#endif
-
 #define CONFIG_SYS_MEMTEST_START       0x100000
 #define CONFIG_SYS_MEMTEST_END         0x10000000
-#define CONFIG_SYS_HZ                  (1000000 / 256)
-#define CONFIG_SYS_TIMERBASE           0x101E2000      /* Timer 0 and 1 base */
 
-#define CONFIG_SYS_TIMER_INTERVAL      10000
-#define CONFIG_SYS_TIMER_RELOAD                (CONFIG_SYS_TIMER_INTERVAL >> 4)
-#define CONFIG_SYS_TIMER_CTRL          0x84            /* Enable, Clock / 16 */
+#define CONFIG_SYS_TIMERBASE           0x101E2000      /* Timer 0 and 1 base */
+#define CONFIG_SYS_TIMER_RATE          (1000000 / 256)
+#define CONFIG_SYS_TIMER_COUNTER       (CONFIG_SYS_TIMERBASE + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
 
 /*
  * control registers
@@ -81,7 +59,6 @@
  * Hardware drivers
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC_USE_32_BIT
 #define CONFIG_SMC91111_BASE   0x10010000
@@ -98,21 +75,14 @@
 #define CONFIG_CONS_INDEX      0
 
 #define CONFIG_BAUDRATE                        38400
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_SERIAL0             0x101F1000
 #define CONFIG_SYS_SERIAL1             0x101F2000
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
 
 /*
  * BOOTP options
@@ -124,7 +94,8 @@
 
 #define CONFIG_BOOTDELAY       2
 #define CONFIG_BOOTARGS                "root=/dev/nfs mem=128M ip=dhcp "\
-                               "netdev=25,0,0xf1010000,0xf1010010,eth0"
+                               "netdev=25,0,0xf1010000,0xf1010010,eth0 "\
+                               "console=ttyAMA0,38400n1"
 
 /*
  * Static configuration when assigning fixed address
@@ -150,17 +121,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR   0x7fc0  /* default load address */
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 * 1024)      /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 * 1024)      /* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -247,6 +207,7 @@
 #define CONFIG_SYS_FLASH_PROTECTION    /* The devices have real protection */
 #define CONFIG_SYS_FLASH_EMPTY_INFO    /* flinfo indicates empty blocks */
 
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
 #endif
 
 #endif /* __CONFIG_H */