Merge branch 'master' of git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / include / configs / x600.h

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 39540e380606d913b3341a17b0e2903d023c6f57..04187c0a312588d82a6bbea557239c4cd0aa167a 100644 (file)
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -74,18 +74,18 @@
 /* Ethernet config options */
 #define CONFIG_MII
 #define CONFIG_DESIGNWARE_ETH
-#define CONFIG_DW_SEARCH_PHY
 #define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
-#define CONFIG_DW_AUTONEG
 #define CONFIG_PHY_ADDR                0       /* PHY address */
 #define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
 
 #define CONFIG_SPEAR_GPIO
 
 /* I2C config options */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#define CONFIG_SYS_I2C_BASE                    0xD0200000
 #define CONFIG_SYS_I2C_SPEED                   400000
 #define CONFIG_SYS_I2C_SLAVE                   0x02
 #define CONFIG_I2C_CHIPADDRESS                 0x50
@@ -107,6 +107,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MEMORY
@@ -171,7 +172,6 @@
 #define CONFIG_SYS_BARGSIZE                    CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LOAD_ADDR                   0x00800000
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_64BIT_VSPRINTF
 
 /* Use last 2 lwords in internal SRAM for bootcounter */
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -181,26 +181,24 @@
 #define CONFIG_UBI_PART                                ubi0
 #define CONFIG_UBIFS_VOLUME                    rootfs
 
-#define xstr(s)        str(s)
-#define str(s) #s
-
 #define MTDIDS_DEFAULT         "nand0=nand"
 #define MTDPARTS_DEFAULT       "mtdparts=nand:64M(ubi0),64M(ubi1)"
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "u-boot_addr=1000000\0"                                         \
-       "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0"                 \
+       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"          \
        "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
-       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
-               "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
-               "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE)    \
+       "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
+               " +${filesize};"                                        \
+               "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
+               "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
                " ${filesize};"                                         \
-               "protect on " xstr(CONFIG_SYS_MONITOR_BASE)             \
+               "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
                " +${filesize}\0"                                       \
        "upd=run load update\0"                                         \
-       "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0"                   \
-       "part=" xstr(CONFIG_UBI_PART) "\0"                              \
-       "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0"                           \
+       "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
+       "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
+       "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
        "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
        "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
                " ${filesize}\0"                                        \
@@ -223,11 +221,12 @@
                "saveenv;boot\0"                                        \
        "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "               \
                "root=ubi0:rootfs rootfstype=ubifs\0"                   \
-       "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0"                     \
+       "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
        "kernel_fs=/boot/uImage \0"                                     \
        "kernel_addr=1000000\0"                                         \
-       "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
-       "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0"                  \
+       "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
+               __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
+       "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
        "dtb_addr=1800000\0"                                            \
        "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
        "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
@@ -274,7 +273,6 @@
 /*
  * SPL related defines
  */
-#define CONFIG_SPL
 #define CONFIG_SPL_TEXT_BASE   0xd2800b00
 #define        CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
 #define CONFIG_SPL_LDSCRIPT    "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"