karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / xilinx-ppc440.h

diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
index ac78420bb4de8110a2644a215a71371ccda7ffa3..f45700878ecdf842de1776f5235f5092e08ccbc1 100644 (file)
--- a/include/configs/xilinx-ppc440.h
+++ b/include/configs/xilinx-ppc440.h
@@ -2,105 +2,16 @@
  * (C) Copyright 2008
  *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
  *  This work has been supported by: QTechnology  http://qtec.com/
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:    GPL-2.0+
 */
 
 #ifndef __CONFIG_GEN_H
 #define __CONFIG_GEN_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_440      1
-#define CONFIG_440             1
-#define CONFIG_4xx             1
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_BASE          0x0
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN         (192 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
 
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE                XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE      { XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE     XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
-
-/*Misc*/
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
-#else
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size      */
-#endif
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on           */
-#define CONFIG_SYS_MEMTEST_END         0x00C00000      /* 4 ... 12 MB in DRAM        */
-#define CONFIG_SYS_LOAD_ADDR           0x00400000      /* default load address       */
-#define CONFIG_SYS_EXTBDINFO           1       /* Extended board_into (bd_t) */
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING         /* add command line history     */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-#define CONFIG_LOOPW                   /* enable loopw command         */
-#define CONFIG_MX_CYCLIC               /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE                /* include version env variable */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET          /* don't print console @ startup */
-#define CONFIG_SYS_HUSH_PARSER                 /* Use the HUSH parser          */
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#define CONFIG_LOADS_ECHO              /* echo on for serial download  */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE           /* allow baudrate change        */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)/* Initial Memory map for Linux */
-
-/*Stack*/
-#define CONFIG_SYS_INIT_RAM_ADDR       0x800000        /* Initial RAM address    */
-#define CONFIG_SYS_INIT_RAM_END        0x2000          /* End of used area in RAM  */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* num bytes initial data   */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ    XPAR_CORE_CLOCK_FREQ_HZ
+/*CPU*/
+#define CONFIG_440             1
+#define CONFIG_XILINX_440      1
 
-/*Flash*/
-#define        CONFIG_SYS_FLASH_BASE           XPAR_FLASH_MEM0_BASEADDR
-#define        CONFIG_SYS_FLASH_CFI            1
-#define        CONFIG_FLASH_CFI_DRIVER 1
-#define        CONFIG_SYS_FLASH_EMPTY_INFO     1
-#define        CONFIG_SYS_MAX_FLASH_BANKS      1
-#define        CONFIG_SYS_FLASH_PROTECTION
+#include <configs/xilinx-ppc.h>
 
 #endif                                         /* __CONFIG_H */