LG Optimus Black (P970) codename sniper support

[karo-tx-uboot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 880d29ca7157119e3de7b80137741d19bc141c13..68853b64de539a9591f950684f98533c8bcc72ca 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -40,7 +40,6 @@
 
 #define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
 
-#define CONFIG_SYS_TEXT_BASE           0x8000000
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 
 /* Flat Device Tree Definitions */
@@ -53,30 +52,42 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x400000)
 
 /* Serial setup */
-#define CONFIG_ZYNQ_SERIAL_UART0
-#define CONFIG_ZYNQ_SERIAL
+#if defined(CONFIG_ZYNQMP_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_ARMV8
+#else
+# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+#  define CONFIG_ZYNQ_SERIAL
+# endif
+#endif
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE \
        { 4800, 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_ZYNQ_SDHCI0
-
 /* Command line configuration */
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_MEMORY
 #define CONFIG_DOS_PARTITION
 #define CONFIG_CMD_ELF
 #define CONFIG_MP
 
+#define CONFIG_CMD_MII
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_SERVERIP
+
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
 # define CONFIG_SPI_FLASH_SST
 # define CONFIG_CMD_SF
 #endif
@@ -129,8 +140,16 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS             64
 
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_SYS_I2C_ZYNQ
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \
+       defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
 
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
@@ -140,8 +159,6 @@
 # define CONFIG_SYS_I2C_ZYNQ_SLAVE             0
 #endif
 
-#define CONFIG_ZYNQMP_EEPROM
-
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
 # define CONFIG_CMD_EEPROM
@@ -152,6 +169,17 @@
 # define CONFIG_SYS_EEPROM_SIZE                        (64 * 1024)
 #endif
 
+#ifdef CONFIG_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                        CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_CMD_SCSI
+#endif
+
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE       /* enable fit_format_{error,warning}() */