zynqmp: usb: Add usb dwc3 driver support for zynqmp

[karo-tx-uboot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 01b7993bb6b81568b8e5829d7aaa2fa8246314f9..da87188e84a2ccad0cb8eddf717ca35b16bd4dbb 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -49,7 +49,7 @@
 #define COUNTER_FREQUENCY              4000000
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x400000)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x2000000)
 
 /* Serial setup */
 #if defined(CONFIG_ZYNQMP_DCC)
@@ -108,13 +108,51 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
+#if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
+#define DFU_DEFAULT_POLL_TIMEOUT       300
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_RAM
+#define CONFIG_G_DNL_VENDOR_NUM                0x03FD
+#define CONFIG_G_DNL_PRODUCT_NUM       0x0300
+#define CONFIG_G_DNL_MANUFACTURER      "Xilinx"
+#define CONFIG_USB_CABLE_CHECK
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_USB_FUNCTION_THOR
+#define CONFIG_THOR_RESET_OFF
+#define DFU_ALT_INFO_RAM \
+       "dfu_ram_info=" \
+       "set dfu_alt_info " \
+       "Image ram 0x200000 0x1800000\\\\;" \
+       "system.dtb ram 0x7000000 0x40000\0" \
+       "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+       "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+#define DFU_ALT_INFO  \
+               DFU_ALT_INFO_RAM
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "kernel_addr=0x80000\0" \
        "fdt_addr=0x7000000\0" \
        "fdt_high=0x10000000\0" \
        "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
-               "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
+               "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
+       DFU_ALT_INFO
 
 #define CONFIG_BOOTARGS                "setenv bootargs console=ttyPS0,${baudrate} " \
                                "earlycon=cdns,mmio,0xff000000,${baudrate}n8"