zynqmp: usb: Add usb dwc3 driver support for zynqmp

[karo-tx-uboot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 511ecca0b826095c712019ea0deb798c99a673b9..da87188e84a2ccad0cb8eddf717ca35b16bd4dbb 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -36,11 +36,10 @@
 #define CPU_RELEASE_ADDR       0xFFFFFF0
 
 /* Cache Definitions */
-#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE      64
 
 #define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
 
-#define CONFIG_SYS_TEXT_BASE           0x8000000
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 
 /* Flat Device Tree Definitions */
@@ -50,11 +49,17 @@
 #define COUNTER_FREQUENCY              4000000
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x400000)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x2000000)
 
 /* Serial setup */
-#define CONFIG_ZYNQ_SERIAL_UART0
-#define CONFIG_ZYNQ_SERIAL
+#if defined(CONFIG_ZYNQMP_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_ARMV8
+#else
+# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+#  define CONFIG_ZYNQ_SERIAL
+# endif
+#endif
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_BAUDRATE                        115200
@@ -66,8 +71,26 @@
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_ELF
+#define CONFIG_MP
+
+#define CONFIG_CMD_MII
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_SERVERIP
+
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
 
 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 # define CONFIG_MMC
@@ -85,13 +108,51 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
+#if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
+#define DFU_DEFAULT_POLL_TIMEOUT       300
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_RAM
+#define CONFIG_G_DNL_VENDOR_NUM                0x03FD
+#define CONFIG_G_DNL_PRODUCT_NUM       0x0300
+#define CONFIG_G_DNL_MANUFACTURER      "Xilinx"
+#define CONFIG_USB_CABLE_CHECK
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_USB_FUNCTION_THOR
+#define CONFIG_THOR_RESET_OFF
+#define DFU_ALT_INFO_RAM \
+       "dfu_ram_info=" \
+       "set dfu_alt_info " \
+       "Image ram 0x200000 0x1800000\\\\;" \
+       "system.dtb ram 0x7000000 0x40000\0" \
+       "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+       "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+#define DFU_ALT_INFO  \
+               DFU_ALT_INFO_RAM
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "kernel_addr=0x80000\0" \
        "fdt_addr=0x7000000\0" \
        "fdt_high=0x10000000\0" \
-       "sdboot=mmcinfo && fatload mmc 0:0 $fdt_addr system.dtb && " \
-               "fatload mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
+       "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
+               "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
+       DFU_ALT_INFO
 
 #define CONFIG_BOOTARGS                "setenv bootargs console=ttyPS0,${baudrate} " \
                                "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
@@ -108,7 +169,6 @@
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_PROMPT              "ZynqMP> "
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HUSH_PARSER
@@ -117,6 +177,46 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS             64
 
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \
+       defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+/* I2C */
+#if defined(CONFIG_SYS_I2C_ZYNQ)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ_SPEED             100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE             0
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_ZYNQMP_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                2
+# define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+# define CONFIG_SYS_EEPROM_SIZE                        (64 * 1024)
+#endif
+
+#ifdef CONFIG_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                        CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_CMD_SCSI
+#endif
+
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE       /* enable fit_format_{error,warning}() */