#include <ec_commands.h>
#include <fdtdec.h>
#include <cros_ec_message.h>
-
-/* Which interface is the device on? */
-enum cros_ec_interface_t {
- CROS_EC_IF_NONE,
- CROS_EC_IF_SPI,
- CROS_EC_IF_I2C,
- CROS_EC_IF_LPC, /* Intel Low Pin Count interface */
- CROS_EC_IF_SANDBOX,
-};
+#include <asm/gpio.h>
/* Our configuration information */
struct cros_ec_dev {
- enum cros_ec_interface_t interface;
- struct spi_slave *spi; /* Our SPI slave, if using SPI */
- int node; /* Our node */
- int parent_node; /* Our parent node (interface) */
- unsigned int cs; /* Our chip select */
- unsigned int addr; /* Device address (for I2C) */
- unsigned int bus_num; /* Bus number (for I2C) */
- unsigned int max_frequency; /* Maximum interface frequency */
- struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */
+ struct udevice *dev; /* Transport device */
+ struct gpio_desc ec_int; /* GPIO used as EC interrupt line */
int protocol_version; /* Protocol version to use */
int optimise_flash_write; /* Don't write erased flash blocks */
*/
struct cros_ec_dev *board_get_cros_ec_dev(void);
+struct dm_cros_ec_ops {
+ int (*check_version)(struct udevice *dev);
+ int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version,
+ const uint8_t *dout, int dout_len,
+ uint8_t **dinp, int din_len);
+ int (*packet)(struct udevice *dev, int out_bytes, int in_bytes);
+};
-/* Internal interfaces */
-int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the i2c cros_ec interface
- *
- * @param dev CROS-EC device
- * @param blob Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the spi cros_ec interface
- *
- * @param dev CROS-EC device
- * @param blob Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the sandbox cros_ec interface
- *
- * @param dev CROS-EC device
- * @param blob Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Check whether the LPC interface supports new-style commands.
- *
- * LPC has its own way of doing this, which involves checking LPC values
- * visible to the host. Do this, and update dev->protocol_version accordingly.
- *
- * @param dev CROS-EC device to check
- */
-int cros_ec_lpc_check_version(struct cros_ec_dev *dev);
-
-/**
- * Send a command to an I2C CROS-EC device and return the reply.
- *
- * This rather complicated function deals with sending both old-style and
- * new-style commands. The old ones have just a command byte and arguments.
- * The new ones have version, command, arg-len, [args], chksum so are 3 bytes
- * longer.
- *
- * The device's internal input/output buffers are used.
- *
- * @param dev CROS-EC device
- * @param cmd Command to send (EC_CMD_...)
- * @param cmd_version Version of command to send (EC_VER_...)
- * @param dout Output data (may be NULL If dout_len=0)
- * @param dout_len Size of output data in bytes
- * @param dinp Returns pointer to response data
- * @param din_len Maximum size of response in bytes
- * @return number of bytes in response, or -1 on error
- */
-int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
- const uint8_t *dout, int dout_len,
- uint8_t **dinp, int din_len);
-
-/**
- * Send a command to a LPC CROS-EC device and return the reply.
- *
- * The device's internal input/output buffers are used.
- *
- * @param dev CROS-EC device
- * @param cmd Command to send (EC_CMD_...)
- * @param cmd_version Version of command to send (EC_VER_...)
- * @param dout Output data (may be NULL If dout_len=0)
- * @param dout_len Size of output data in bytes
- * @param dinp Returns pointer to response data
- * @param din_len Maximum size of response in bytes
- * @return number of bytes in response, or -1 on error
- */
-int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
- const uint8_t *dout, int dout_len,
- uint8_t **dinp, int din_len);
-
-int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
- const uint8_t *dout, int dout_len,
- uint8_t **dinp, int din_len);
+#define dm_cros_ec_get_ops(dev) \
+ ((struct dm_cros_ec_ops *)(dev)->driver->ops)
-/**
- * Send a packet to a CROS-EC device and return the response packet.
- *
- * Expects the request packet to be stored in dev->dout. Stores the response
- * packet in dev->din.
- *
- * @param dev CROS-EC device
- * @param out_bytes Size of request packet to output
- * @param in_bytes Maximum size of response packet to receive
- * @return number of bytes in response packet, or <0 on error
- */
-int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes);
-int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes,
- int in_bytes);
+int cros_ec_register(struct udevice *dev);
/**
* Dump a block of data for a command.
* @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF
* @return 0 if ok, -1 on error
*/
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state);
/**
* Read back a LDO / FET current state.
* @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF
* @return 0 if ok, -1 on error
*/
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
-
-/**
- * Initialize the Chrome OS EC at board initialization time.
- *
- * @return 0 if ok, -ve on error
- */
-int cros_ec_board_init(void);
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state);
/**
* Get access to the error reported when cros_ec_board_init() was called
* Returns information from the FDT about the Chrome EC flash
*
* @param blob FDT blob to use
+ * @param node Node offset to read from
* @param config Structure to use to return information
*/
-int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config);
+int cros_ec_decode_ec_flash(const void *blob, int node,
+ struct fdt_cros_ec *config);
/**
* Check the current keyboard state, in case recovery mode is requested.
*/
void cros_ec_check_keyboard(struct cros_ec_dev *dev);
+struct i2c_msg;
/*
* Tunnel an I2C transfer to the EC
*
* @param dev CROS-EC device
- * @param chip Chip address (7-bit I2C address)
- * @param addr Register address to read/write
- * @param alen Length of register address in bytes
- * @param buffer Buffer containing data to read/write
- * @param len Length of buffer
- * @param is_read 1 if this is a read, 0 if this is a write
+ * @param msg List of messages to transfer
+ * @param nmsgs Number of messages to transfer
*/
-int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
- int alen, uchar *buffer, int len, int is_read);
+int cros_ec_i2c_tunnel(struct udevice *dev, struct i2c_msg *msg, int nmsgs);
#endif
projects / karo-tx-uboot.git / blobdiff