ARM: imx6: clocks: remove function local definitions of mxc_ccm_reg and anatop_regs

[karo-tx-uboot.git] / include / fdt_support.h

diff --git a/include/fdt_support.h b/include/fdt_support.h
index 2309f755834b8dd93c002913beef8512961b1449..a02fe047f4b64628ee44c6fdf719aa8e8d433740 100644 (file)
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -16,8 +16,35 @@ uint32_t fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
                                const char *prop, const uint32_t dflt);
 uint32_t fdt_getprop_u32_default(const void *fdt, const char *path,
                                const char *prop, const uint32_t dflt);
+
+/**
+ * Add data to the root of the FDT before booting the OS.
+ *
+ * See doc/device-tree-bindings/root.txt
+ *
+ * @param fdt          FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_root(void *fdt);
+
+/**
+ * Add chosen data the FDT before booting the OS.
+ *
+ * In particular, this adds the kernel command line (bootargs) to the FDT.
+ *
+ * @param fdt          FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
 int fdt_chosen(void *fdt);
+
+/**
+ * Add initrd information to the FDT before booting the OS.
+ *
+ * @param fdt          FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
+
 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
                      const void *val, int len, int create);
 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
@@ -40,14 +67,53 @@ void do_fixup_by_compat(void *fdt, const char *compat,
                        const char *prop, const void *val, int len, int create);
 void do_fixup_by_compat_u32(void *fdt, const char *compat,
                            const char *prop, uint32_t val, int create);
+/**
+ * Setup the memory node in the DT. Creates one if none was existing before.
+ * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
+ * whole memory.
+ *
+ * @param blob         FDT blob to update
+ * @param start                Begin of DRAM mapping in physical memory
+ * @param size         Size of the single memory bank
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
 int fdt_fixup_memory(void *blob, uint64_t start, uint64_t size);
+
+/**
+ * Fill the DT memory node with multiple memory banks.
+ * Creates the node if none was existing before.
+ * If banks is 0, it will not touch the existing reg property. This allows
+ * boards to not mess with the existing DT setup, which may have been
+ * filled in properly before.
+ *
+ * @param blob         FDT blob to update
+ * @param start                Array of size <banks> to hold the start addresses.
+ * @param size         Array of size <banks> to hold the size of each region.
+ * @param banks                Number of memory banks to create. If 0, the reg
+ *                     property will be left untouched.
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
 int fdt_fixup_memory_banks(void *blob, uint64_t start[], uint64_t size[], int banks);
+
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
                         const void *val, int len, int create);
 void fdt_fixup_qe_firmware(void *fdt);
 
 #if defined(__UBOOT__)
+/**
+ * Update native-mode property of display-timings node to the phandle
+ * of the timings matching a display by name (case insensitive).
+ *
+ * see kernel Documentation/devicetree/bindings/video/display-timing.txt
+ *
+ * @param blob         FDT blob to update
+ * @param path         path within dt
+ * @param display      name of display timing to match
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_fixup_display(void *blob, const char *path, const char *display);
+
 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 void fdt_fixup_dr_usb(void *blob, bd_t *bd);
 #else
@@ -101,7 +167,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
  */
 int ft_system_setup(void *blob, bd_t *bd);
 
-void set_working_fdt_addr(void *addr);
+void set_working_fdt_addr(ulong addr);
 int fdt_shrink_to_minimum(void *blob);
 int fdt_increase_size(void *fdt, int add_len);