]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/lcd.h
sniper: Pass serial number through ATAG
[karo-tx-uboot.git] / include / lcd.h
index a6822d29fe2a946310c2f537590f17c81a298522..38ed0f3a9b13f134f85aafdeca7bebad882b9653 100644 (file)
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ *
  * MPC823 and PXA LCD Controller
  *
  * Modeled after video interface by Paolo Scaffardi
@@ -7,56 +9,28 @@
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _LCD_H_
 #define _LCD_H_
+#include <lcd_console.h>
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#include <bmp_layout.h>
+#include <asm/byteorder.h>
+#endif
 
 extern char lcd_is_enabled;
-
 extern int lcd_line_length;
-extern int lcd_color_fg;
-extern int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-extern void *lcd_base;         /* Start of framebuffer memory  */
-extern void *lcd_console_address;      /* Start of console buffer      */
-
-extern short console_col;
-extern short console_row;
 extern struct vidinfo panel_info;
 
-extern void lcd_ctrl_init (void *lcdbase);
-extern void lcd_enable (void);
-extern int board_splash_screen_prepare(void);
-
-/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
-extern void lcd_setcolreg (ushort regno,
-                               ushort red, ushort green, ushort blue);
-extern void lcd_initcolregs (void);
+void lcd_ctrl_init(void *lcdbase);
+void lcd_enable(void);
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue);
 
-/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
-extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
-extern int bmp_display(ulong addr, int x, int y);
+struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,
+                            void **alloc_addr);
+int bmp_display(ulong addr, int x, int y);
 
 /**
  * Set whether we need to flush the dcache when changing the LCD image. This
@@ -67,232 +41,39 @@ extern int bmp_display(ulong addr, int x, int y);
 void lcd_set_flush_dcache(int flush);
 
 #if defined CONFIG_MPC823
-/*
- * LCD controller stucture for MPC823 CPU
- */
-typedef struct vidinfo {
-       ushort  vl_col;         /* Number of columns (i.e. 640) */
-       ushort  vl_row;         /* Number of rows (i.e. 480) */
-       ushort  vl_width;       /* Width of display area in millimeters */
-       ushort  vl_height;      /* Height of display area in millimeters */
-
-       /* LCD configuration register */
-       u_char  vl_clkp;        /* Clock polarity */
-       u_char  vl_oep;         /* Output Enable polarity */
-       u_char  vl_hsp;         /* Horizontal Sync polarity */
-       u_char  vl_vsp;         /* Vertical Sync polarity */
-       u_char  vl_dp;          /* Data polarity */
-       u_char  vl_bpix;        /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
-       u_char  vl_lbw;         /* LCD Bus width, 0 = 4, 1 = 8 */
-       u_char  vl_splt;        /* Split display, 0 = single-scan, 1 = dual-scan */
-       u_char  vl_clor;        /* Color, 0 = mono, 1 = color */
-       u_char  vl_tft;         /* 0 = passive, 1 = TFT */
-
-       /* Horizontal control register. Timing from data sheet */
-       ushort  vl_wbl;         /* Wait between lines */
-
-       /* Vertical control register */
-       u_char  vl_vpw;         /* Vertical sync pulse width */
-       u_char  vl_lcdac;       /* LCD AC timing */
-       u_char  vl_wbf;         /* Wait between frames */
-} vidinfo_t;
-
+#include <mpc823_lcd.h>
 #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
        defined CONFIG_CPU_MONAHANS
-/*
- * PXA LCD DMA descriptor
- */
-struct pxafb_dma_descriptor {
-       u_long  fdadr;          /* Frame descriptor address register */
-       u_long  fsadr;          /* Frame source address register */
-       u_long  fidr;           /* Frame ID register */
-       u_long  ldcmd;          /* Command register */
-};
-
-/*
- * PXA LCD info
- */
-struct pxafb_info {
-
-       /* Misc registers */
-       u_long  reg_lccr3;
-       u_long  reg_lccr2;
-       u_long  reg_lccr1;
-       u_long  reg_lccr0;
-       u_long  fdadr0;
-       u_long  fdadr1;
-
-       /* DMA descriptors */
-       struct  pxafb_dma_descriptor *  dmadesc_fblow;
-       struct  pxafb_dma_descriptor *  dmadesc_fbhigh;
-       struct  pxafb_dma_descriptor *  dmadesc_palette;
-
-       u_long  screen;         /* physical address of frame buffer */
-       u_long  palette;        /* physical address of palette memory */
-       u_int   palette_size;
-};
-
-/*
- * LCD controller stucture for PXA CPU
- */
-typedef struct vidinfo {
-       ushort  vl_col;         /* Number of columns (i.e. 640) */
-       ushort  vl_row;         /* Number of rows (i.e. 480) */
-       ushort  vl_width;       /* Width of display area in millimeters */
-       ushort  vl_height;      /* Height of display area in millimeters */
-
-       /* LCD configuration register */
-       u_char  vl_clkp;        /* Clock polarity */
-       u_char  vl_oep;         /* Output Enable polarity */
-       u_char  vl_hsp;         /* Horizontal Sync polarity */
-       u_char  vl_vsp;         /* Vertical Sync polarity */
-       u_char  vl_dp;          /* Data polarity */
-       u_char  vl_bpix;        /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
-       u_char  vl_lbw;         /* LCD Bus width, 0 = 4, 1 = 8 */
-       u_char  vl_splt;        /* Split display, 0 = single-scan, 1 = dual-scan */
-       u_char  vl_clor;        /* Color, 0 = mono, 1 = color */
-       u_char  vl_tft;         /* 0 = passive, 1 = TFT */
-
-       /* Horizontal control register. Timing from data sheet */
-       ushort  vl_hpw;         /* Horz sync pulse width */
-       u_char  vl_blw;         /* Wait before of line */
-       u_char  vl_elw;         /* Wait end of line */
-
-       /* Vertical control register. */
-       u_char  vl_vpw;         /* Vertical sync pulse width */
-       u_char  vl_bfw;         /* Wait before of frame */
-       u_char  vl_efw;         /* Wait end of frame */
-
-       /* PXA LCD controller params */
-       struct  pxafb_info pxa;
-} vidinfo_t;
-
+#include <pxa_lcd.h>
 #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
-
-typedef struct vidinfo {
-       ushort vl_col;          /* Number of columns (i.e. 640) */
-       ushort vl_row;          /* Number of rows (i.e. 480) */
-       u_long vl_clk;  /* pixel clock in ps    */
-
-       /* LCD configuration register */
-       u_long vl_sync;         /* Horizontal / vertical sync */
-       u_long vl_bpix;         /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
-       u_long vl_tft;          /* 0 = passive, 1 = TFT */
-       u_long vl_cont_pol_low; /* contrast polarity is low */
-       u_long vl_clk_pol;      /* clock polarity */
-
-       /* Horizontal control register. */
-       u_long vl_hsync_len;    /* Length of horizontal sync */
-       u_long vl_left_margin;  /* Time from sync to picture */
-       u_long vl_right_margin; /* Time from picture to sync */
-
-       /* Vertical control register. */
-       u_long vl_vsync_len;    /* Length of vertical sync */
-       u_long vl_upper_margin; /* Time from sync to picture */
-       u_long vl_lower_margin; /* Time from picture to sync */
-
-       u_long  mmio;           /* Memory mapped registers */
-} vidinfo_t;
-
+#include <atmel_lcd.h>
 #elif defined(CONFIG_EXYNOS_FB)
-
-enum {
-       FIMD_RGB_INTERFACE = 1,
-       FIMD_CPU_INTERFACE = 2,
-};
-
-enum exynos_fb_rgb_mode_t {
-       MODE_RGB_P = 0,
-       MODE_BGR_P = 1,
-       MODE_RGB_S = 2,
-       MODE_BGR_S = 3,
-};
-
-typedef struct vidinfo {
-       ushort vl_col;          /* Number of columns (i.e. 640) */
-       ushort vl_row;          /* Number of rows (i.e. 480) */
-       ushort vl_width;        /* Width of display area in millimeters */
-       ushort vl_height;       /* Height of display area in millimeters */
-
-       /* LCD configuration register */
-       u_char vl_freq;         /* Frequency */
-       u_char vl_clkp;         /* Clock polarity */
-       u_char vl_oep;          /* Output Enable polarity */
-       u_char vl_hsp;          /* Horizontal Sync polarity */
-       u_char vl_vsp;          /* Vertical Sync polarity */
-       u_char vl_dp;           /* Data polarity */
-       u_char vl_bpix;         /* Bits per pixel */
-
-       /* Horizontal control register. Timing from data sheet */
-       u_char vl_hspw;         /* Horz sync pulse width */
-       u_char vl_hfpd;         /* Wait before of line */
-       u_char vl_hbpd;         /* Wait end of line */
-
-       /* Vertical control register. */
-       u_char  vl_vspw;        /* Vertical sync pulse width */
-       u_char  vl_vfpd;        /* Wait before of frame */
-       u_char  vl_vbpd;        /* Wait end of frame */
-       u_char  vl_cmd_allow_len; /* Wait end of frame */
-
-       unsigned int win_id;
-       unsigned int init_delay;
-       unsigned int power_on_delay;
-       unsigned int reset_delay;
-       unsigned int interface_mode;
-       unsigned int mipi_enabled;
-       unsigned int dp_enabled;
-       unsigned int cs_setup;
-       unsigned int wr_setup;
-       unsigned int wr_act;
-       unsigned int wr_hold;
-       unsigned int logo_on;
-       unsigned int logo_width;
-       unsigned int logo_height;
-       unsigned long logo_addr;
-       unsigned int rgb_mode;
-       unsigned int resolution;
-
-       /* parent clock name(MPLL, EPLL or VPLL) */
-       unsigned int pclk_name;
-       /* ratio value for source clock from parent clock. */
-       unsigned int sclk_div;
-
-       unsigned int dual_lcd_enabled;
-
-} vidinfo_t;
-
-void init_panel_info(vidinfo_t *vid);
-
+#include <exynos_lcd.h>
 #else
-
 typedef struct vidinfo {
        ushort  vl_col;         /* Number of columns (i.e. 160) */
        ushort  vl_row;         /* Number of rows (i.e. 100) */
-
+       ushort  vl_rot;         /* Rotation of Display (0, 1, 2, 3) */
        u_char  vl_bpix;        /* Bits per pixel, 0 = 1 */
-
        ushort  *cmap;          /* Pointer to the colormap */
-
        void    *priv;          /* Pointer to driver-specific data */
 } vidinfo_t;
 
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
-
-extern vidinfo_t panel_info;
-
-/* Video functions */
-
-#if defined(CONFIG_RBC823)
-void   lcd_disable     (void);
+static __maybe_unused ushort *configuration_get_cmap(void)
+{
+       return panel_info.cmap;
+}
 #endif
 
+ushort *configuration_get_cmap(void);
 
-/* int lcd_init        (void *lcdbase); */
-void   lcd_putc        (const char c);
-void   lcd_puts        (const char *s);
-void   lcd_printf      (const char *fmt, ...);
-void   lcd_clear(void);
-int    lcd_display_bitmap(ulong bmp_image, int x, int y);
+extern vidinfo_t panel_info;
+
+void lcd_putc(const char c);
+void lcd_puts(const char *s);
+void lcd_printf(const char *fmt, ...);
+void lcd_clear(void);
+int lcd_display_bitmap(ulong bmp_image, int x, int y);
 
 /**
  * Get the width of the LCD in pixels
@@ -322,6 +103,20 @@ int lcd_get_screen_rows(void);
  */
 int lcd_get_screen_columns(void);
 
+/**
+ * Get the background color of the LCD
+ *
+ * @return background color value
+ */
+int lcd_getbgcolor(void);
+
+/**
+ * Get the foreground color of the LCD
+ *
+ * @return foreground color value
+ */
+int lcd_getfgcolor(void);
+
 /**
  * Set the position of the text cursor
  *
@@ -336,13 +131,8 @@ void lcd_show_board_info(void);
 /* Return the size of the LCD frame buffer, and the line length */
 int lcd_get_size(int *line_length);
 
-/************************************************************************/
-/* ** BITMAP DISPLAY SUPPORT                                           */
-/************************************************************************/
-#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
-# include <bmp_layout.h>
-# include <asm/byteorder.h>
-#endif
+/* Update the LCD / flush the cache */
+void lcd_sync(void);
 
 /*
  *  Information about displays we are using. This is for configuring
@@ -350,54 +140,40 @@ int lcd_get_size(int *line_length);
  *  is connected, as we can't autodetect anything.
  */
 #define CONFIG_SYS_HIGH        0       /* Pins are active high                 */
-#define CONFIG_SYS_LOW         1       /* Pins are active low                  */
+#define CONFIG_SYS_LOW 1       /* Pins are active low                  */
 
 #define LCD_MONOCHROME 0
 #define LCD_COLOR2     1
 #define LCD_COLOR4     2
 #define LCD_COLOR8     3
 #define LCD_COLOR16    4
+#define LCD_COLOR32    5
 
-/*----------------------------------------------------------------------*/
 #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
-# define LCD_INFO_X            0
-# define LCD_INFO_Y            (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
+#define LCD_INFO_X             0
+#define LCD_INFO_Y             (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
 #elif defined(CONFIG_LCD_LOGO)
-# define LCD_INFO_X            (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y            (VIDEO_FONT_HEIGHT)
+#define LCD_INFO_X             (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
+#define LCD_INFO_Y             VIDEO_FONT_HEIGHT
 #else
-# define LCD_INFO_X            (VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y            (VIDEO_FONT_HEIGHT)
+#define LCD_INFO_X             VIDEO_FONT_WIDTH
+#define LCD_INFO_Y             VIDEO_FONT_HEIGHT
 #endif
 
 /* Default to 8bpp if bit depth not specified */
 #ifndef LCD_BPP
-# define LCD_BPP                       LCD_COLOR8
+#define LCD_BPP                        LCD_COLOR8
 #endif
+
 #ifndef LCD_DF
-# define LCD_DF                        1
+#define LCD_DF                 1
 #endif
 
 /* Calculate nr. of bits per pixel  and nr. of colors */
 #define NBITS(bit_code)                (1 << (bit_code))
 #define NCOLORS(bit_code)      (1 << NBITS(bit_code))
 
-/************************************************************************/
-/* ** CONSOLE CONSTANTS                                                        */
-/************************************************************************/
-#if LCD_BPP == LCD_MONOCHROME
-
-/*
- * Simple black/white definitions
- */
-# define CONSOLE_COLOR_BLACK   0
-# define CONSOLE_COLOR_WHITE   1       /* Must remain last / highest   */
-
-#elif LCD_BPP == LCD_COLOR8
-
-/*
- * 8bpp color definitions
- */
+#if LCD_BPP == LCD_COLOR8
 # define CONSOLE_COLOR_BLACK   0
 # define CONSOLE_COLOR_RED     1
 # define CONSOLE_COLOR_GREEN   2
@@ -406,51 +182,33 @@ int lcd_get_size(int *line_length);
 # define CONSOLE_COLOR_MAGENTA 5
 # define CONSOLE_COLOR_CYAN    6
 # define CONSOLE_COLOR_GREY    14
-# define CONSOLE_COLOR_WHITE   15      /* Must remain last / highest   */
-
-#else
-
-/*
- * 16bpp color definitions
- */
-# define CONSOLE_COLOR_BLACK   0x0000
-# define CONSOLE_COLOR_WHITE   0xffff  /* Must remain last / highest   */
-
+# define CONSOLE_COLOR_WHITE   15              /* Must remain last / highest */
+#elif LCD_BPP == LCD_COLOR32
+#define CONSOLE_COLOR_RED      0x00ff0000
+#define CONSOLE_COLOR_GREEN    0x0000ff00
+#define CONSOLE_COLOR_YELLOW   0x00ffff00
+#define CONSOLE_COLOR_BLUE     0x000000ff
+#define CONSOLE_COLOR_MAGENTA  0x00ff00ff
+#define CONSOLE_COLOR_CYAN     0x0000ffff
+#define CONSOLE_COLOR_GREY     0x00aaaaaa
+#define CONSOLE_COLOR_BLACK    0x00000000
+#define CONSOLE_COLOR_WHITE    0x00ffffff      /* Must remain last / highest */
+#define NBYTES(bit_code)       (NBITS(bit_code) >> 3)
+#else /* 16bpp color definitions */
+#define CONSOLE_COLOR_BLACK    0x0000
+#define CONSOLE_COLOR_WHITE    0xffff          /* Must remain last / highest */
 #endif /* color definitions */
 
-/************************************************************************/
-#ifndef PAGE_SIZE
-# define PAGE_SIZE     4096
-#endif
-
-/************************************************************************/
-/* ** CONSOLE DEFINITIONS & FUNCTIONS                                  */
-/************************************************************************/
-#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
-# define CONSOLE_ROWS          ((panel_info.vl_row-BMP_LOGO_HEIGHT) \
-                                       / VIDEO_FONT_HEIGHT)
+#if LCD_BPP == LCD_COLOR16
+#define fbptr_t ushort
+#elif LCD_BPP == LCD_COLOR32
+#define fbptr_t u32
 #else
-# define CONSOLE_ROWS          (panel_info.vl_row / VIDEO_FONT_HEIGHT)
+#define fbptr_t uchar
 #endif
 
-#define CONSOLE_COLS           (panel_info.vl_col / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE       (VIDEO_FONT_HEIGHT * lcd_line_length)
-#define CONSOLE_ROW_FIRST      (lcd_console_address)
-#define CONSOLE_ROW_SECOND     (lcd_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST       (lcd_console_address + CONSOLE_SIZE \
-                                       - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE           (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE    (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-#if LCD_BPP == LCD_MONOCHROME
-# define COLOR_MASK(c)         ((c)      | (c) << 1 | (c) << 2 | (c) << 3 | \
-                                (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
-# define COLOR_MASK(c)         (c)
-#else
-# error Unsupported LCD BPP.
+#ifndef PAGE_SIZE
+#define PAGE_SIZE      4096
 #endif
 
-/************************************************************************/
-
 #endif /* _LCD_H_ */