#ifndef _PCI_H
#define _PCI_H
+#define PCI_CFG_SPACE_SIZE 256
+#define PCI_CFG_SPACE_EXP_SIZE 4096
+
/*
* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
#define PCI_MIN_GNT 0x3e /* 8 bits */
#define PCI_MAX_LAT 0x3f /* 8 bits */
+#define PCI_INTERRUPT_LINE_DISABLE 0xff
+
/* Header type 1 (PCI-to-PCI bridges) */
#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
#define PCI_FIND_CAP_TTL 0x48
#define CAP_START_POS 0x40
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */
+#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
+#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
+#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+
/* Include the ID list */
#include <pci_ids.h>
#define pci_io_to_virt(dev, addr, len, map_flags) \
pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
+/* For driver model these are defined in macros in pci_compat.c */
extern int pci_hose_read_config_byte(struct pci_controller *hose,
pci_dev_t dev, int where, u8 *val);
extern int pci_hose_read_config_word(struct pci_controller *hose,
extern int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos,
int cap);
+int pci_find_next_ext_capability(struct pci_controller *hose,
+ pci_dev_t dev, int start, int cap);
+int pci_hose_find_ext_capability(struct pci_controller *hose,
+ pci_dev_t dev, int cap);
+
#ifdef CONFIG_PCI_FIXUP_DEV
extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
unsigned short vendor,
/* Get access to a PCI bus' operations */
#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops)
+/**
+ * pci_get_bdf() - Get the BDF value for a device
+ *
+ * @dev: Device to check
+ * @return bus/device/function value (see PCI_BDF())
+ */
+pci_dev_t pci_get_bdf(struct udevice *dev);
+
/**
* pci_bind_bus_devices() - scan a PCI bus and bind devices
*
int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
struct udevice **devp);
+/**
+ * pci_find_first_device() - return the first available PCI device
+ *
+ * This function and pci_find_first_device() allow iteration through all
+ * available PCI devices on all buses. Assuming there are any, this will
+ * return the first one.
+ *
+ * @devp: Set to the first available device, or NULL if no more are left
+ * or we got an error
+ * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe)
+ */
+int pci_find_first_device(struct udevice **devp);
+
+/**
+ * pci_find_next_device() - return the next available PCI device
+ *
+ * Finds the next available PCI device after the one supplied, or sets @devp
+ * to NULL if there are no more.
+ *
+ * @devp: On entry, the last device returned. Set to the next available
+ * device, or NULL if no more are left or we got an error
+ * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe)
+ */
+int pci_find_next_device(struct udevice **devp);
+
/**
* pci_get_ff() - Returns a mask for the given access size
*
int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
unsigned long value, enum pci_size_t size);
+/**
+ * Driver model PCI config access functions. Use these in preference to others
+ * when you have a valid device
+ */
+int dm_pci_read_config(struct udevice *dev, int offset, unsigned long *valuep,
+ enum pci_size_t size);
+
+int dm_pci_read_config8(struct udevice *dev, int offset, u8 *valuep);
+int dm_pci_read_config16(struct udevice *dev, int offset, u16 *valuep);
+int dm_pci_read_config32(struct udevice *dev, int offset, u32 *valuep);
+
+int dm_pci_write_config(struct udevice *dev, int offset, unsigned long value,
+ enum pci_size_t size);
+
+int dm_pci_write_config8(struct udevice *dev, int offset, u8 value);
+int dm_pci_write_config16(struct udevice *dev, int offset, u16 value);
+int dm_pci_write_config32(struct udevice *dev, int offset, u32 value);
+
/*
* The following functions provide access to the above without needing the
* size parameter. We are trying to encourage the use of the 8/16/32-style
projects / karo-tx-uboot.git / blobdiff