image: Support signing of images

[karo-tx-uboot.git] / include / spi.h

diff --git a/include/spi.h b/include/spi.h
index 7887d0f9b842c48058f404fdf3075df792d50536..e8e654467fde1476d7ec25e4bde1e6af32802714 100644 (file)
--- a/include/spi.h
+++ b/include/spi.h
@@ -26,13 +26,6 @@
 
 /* Controller-specific definitions: */
 
-/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
-#ifdef CONFIG_MPC8XXX_SPI
-# ifndef CONFIG_HARD_SPI
-#  define CONFIG_HARD_SPI
-# endif
-#endif
-
 /* SPI mode flags */
 #define        SPI_CPHA        0x01                    /* clock phase */
 #define        SPI_CPOL        0x02                    /* clock polarity */
@@ -44,11 +37,16 @@
 #define        SPI_LSB_FIRST   0x08                    /* per-word bits-on-wire */
 #define        SPI_3WIRE       0x10                    /* SI/SO signals shared */
 #define        SPI_LOOP        0x20                    /* loopback mode */
+#define        SPI_SLAVE       0x40                    /* slave mode */
+#define        SPI_PREAMBLE    0x80                    /* Skip preamble bytes */
 
 /* SPI transfer flags */
 #define SPI_XFER_BEGIN 0x01                    /* Assert CS before transfer */
 #define SPI_XFER_END   0x02                    /* Deassert CS after transfer */
 
+/* Header byte that marks the start of the message */
+#define SPI_PREAMBLE_END_BYTE  0xec
+
 /*-----------------------------------------------------------------------
  * Representation of a SPI slave, i.e. what we're communicating with.
  *
@@ -56,10 +54,13 @@
  *
  *   bus:      ID of the bus that the slave is attached to.
  *   cs:       ID of the chip select connected to the slave.
+ *   max_write_size:   If non-zero, the maximum number of bytes which can
+ *             be written at once, excluding command bytes.
  */
 struct spi_slave {
        unsigned int    bus;
        unsigned int    cs;
+       unsigned int max_write_size;
 };
 
 /*-----------------------------------------------------------------------
@@ -69,6 +70,47 @@ struct spi_slave {
  */
 void spi_init(void);
 
+/**
+ * spi_do_alloc_slave - Allocate a new SPI slave (internal)
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select. Use the helper macro spi_alloc_slave() to call this.
+ *
+ * @offset: Offset of struct spi_slave within slave structure
+ * @size: Size of slave structure
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
+                        unsigned int cs);
+
+/**
+ * spi_alloc_slave - Allocate a new SPI slave
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select.
+ *
+ * @_struct: Name of structure to allocate (e.g. struct tegra_spi). This
+ *     structure must contain a member 'struct spi_slave *slave'.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+#define spi_alloc_slave(_struct, bus, cs) \
+       spi_do_alloc_slave(offsetof(_struct, slave), \
+                           sizeof(_struct), bus, cs)
+
+/**
+ * spi_alloc_slave_base - Allocate a new SPI slave with no private data
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select.
+ *
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+#define spi_alloc_slave_base(bus, cs) \
+       spi_do_alloc_slave(0, sizeof(struct spi_slave), bus, cs)
+
 /*-----------------------------------------------------------------------
  * Set up communications parameters for a SPI slave.
  *
@@ -205,4 +247,20 @@ static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
        return ret < 0 ? ret : din[1];
 }
 
+/**
+ * Set up a SPI slave for a particular device tree node
+ *
+ * This calls spi_setup_slave() with the correct bus number. Call
+ * spi_free_slave() to free it later.
+ *
+ * @param blob         Device tree blob
+ * @param node         SPI peripheral node to use
+ * @param cs           Chip select to use
+ * @param max_hz       Maximum SCK rate in Hz (0 for default)
+ * @param mode         Clock polarity, clock phase and other parameters
+ * @return pointer to new spi_slave structure
+ */
+struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
+               unsigned int cs, unsigned int max_hz, unsigned int mode);
+
 #endif /* _SPI_H_ */