/*
- * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
*
- * See file CREDITS for list of people who contributed to this
- * project.
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPM_H
+#define __TPM_H
+
+#include <tis.h>
+
+/*
+ * Here is a partial implementation of TPM commands. Please consult TCG Main
+ * Specification for definitions of TPM commands.
+ */
+
+#define TPM_HEADER_SIZE 10
+
+enum tpm_duration {
+ TPM_SHORT = 0,
+ TPM_MEDIUM = 1,
+ TPM_LONG = 2,
+ TPM_UNDEFINED,
+
+ TPM_DURATION_COUNT,
+};
+
+enum tpm_startup_type {
+ TPM_ST_CLEAR = 0x0001,
+ TPM_ST_STATE = 0x0002,
+ TPM_ST_DEACTIVATED = 0x0003,
+};
+
+enum tpm_physical_presence {
+ TPM_PHYSICAL_PRESENCE_HW_DISABLE = 0x0200,
+ TPM_PHYSICAL_PRESENCE_CMD_DISABLE = 0x0100,
+ TPM_PHYSICAL_PRESENCE_LIFETIME_LOCK = 0x0080,
+ TPM_PHYSICAL_PRESENCE_HW_ENABLE = 0x0040,
+ TPM_PHYSICAL_PRESENCE_CMD_ENABLE = 0x0020,
+ TPM_PHYSICAL_PRESENCE_NOTPRESENT = 0x0010,
+ TPM_PHYSICAL_PRESENCE_PRESENT = 0x0008,
+ TPM_PHYSICAL_PRESENCE_LOCK = 0x0004,
+};
+
+enum tpm_nv_index {
+ TPM_NV_INDEX_LOCK = 0xffffffff,
+ TPM_NV_INDEX_0 = 0x00000000,
+ TPM_NV_INDEX_DIR = 0x10000001,
+};
+
+#define TPM_NV_PER_GLOBALLOCK (1U << 15)
+#define TPM_NV_PER_PPWRITE (1U << 0)
+#define TPM_NV_PER_READ_STCLEAR (1U << 31)
+#define TPM_NV_PER_WRITE_STCLEAR (1U << 14)
+
+enum {
+ TPM_PUBEK_SIZE = 256,
+};
+
+/**
+ * TPM return codes as defined in the TCG Main specification
+ * (TPM Main Part 2 Structures; Specification version 1.2)
+ */
+enum tpm_return_code {
+ TPM_BASE = 0x00000000,
+ TPM_NON_FATAL = 0x00000800,
+ TPM_SUCCESS = TPM_BASE,
+ /* TPM-defined fatal error codes */
+ TPM_AUTHFAIL = TPM_BASE + 1,
+ TPM_BADINDEX = TPM_BASE + 2,
+ TPM_BAD_PARAMETER = TPM_BASE + 3,
+ TPM_AUDITFAILURE = TPM_BASE + 4,
+ TPM_CLEAR_DISABLED = TPM_BASE + 5,
+ TPM_DEACTIVATED = TPM_BASE + 6,
+ TPM_DISABLED = TPM_BASE + 7,
+ TPM_DISABLED_CMD = TPM_BASE + 8,
+ TPM_FAIL = TPM_BASE + 9,
+ TPM_BAD_ORDINAL = TPM_BASE + 10,
+ TPM_INSTALL_DISABLED = TPM_BASE + 11,
+ TPM_INVALID_KEYHANDLE = TPM_BASE + 12,
+ TPM_KEYNOTFOUND = TPM_BASE + 13,
+ TPM_INAPPROPRIATE_ENC = TPM_BASE + 14,
+ TPM_MIGRATE_FAIL = TPM_BASE + 15,
+ TPM_INVALID_PCR_INFO = TPM_BASE + 16,
+ TPM_NOSPACE = TPM_BASE + 17,
+ TPM_NOSRK = TPM_BASE + 18,
+ TPM_NOTSEALED_BLOB = TPM_BASE + 19,
+ TPM_OWNER_SET = TPM_BASE + 20,
+ TPM_RESOURCES = TPM_BASE + 21,
+ TPM_SHORTRANDOM = TPM_BASE + 22,
+ TPM_SIZE = TPM_BASE + 23,
+ TPM_WRONGPCRVAL = TPM_BASE + 24,
+ TPM_BAD_PARAM_SIZE = TPM_BASE + 25,
+ TPM_SHA_THREAD = TPM_BASE + 26,
+ TPM_SHA_ERROR = TPM_BASE + 27,
+ TPM_FAILEDSELFTEST = TPM_BASE + 28,
+ TPM_AUTH2FAIL = TPM_BASE + 29,
+ TPM_BADTAG = TPM_BASE + 30,
+ TPM_IOERROR = TPM_BASE + 31,
+ TPM_ENCRYPT_ERROR = TPM_BASE + 32,
+ TPM_DECRYPT_ERROR = TPM_BASE + 33,
+ TPM_INVALID_AUTHHANDLE = TPM_BASE + 34,
+ TPM_NO_ENDORSEMENT = TPM_BASE + 35,
+ TPM_INVALID_KEYUSAGE = TPM_BASE + 36,
+ TPM_WRONG_ENTITYTYPE = TPM_BASE + 37,
+ TPM_INVALID_POSTINIT = TPM_BASE + 38,
+ TPM_INAPPROPRIATE_SIG = TPM_BASE + 39,
+ TPM_BAD_KEY_PROPERTY = TPM_BASE + 40,
+ TPM_BAD_MIGRATION = TPM_BASE + 41,
+ TPM_BAD_SCHEME = TPM_BASE + 42,
+ TPM_BAD_DATASIZE = TPM_BASE + 43,
+ TPM_BAD_MODE = TPM_BASE + 44,
+ TPM_BAD_PRESENCE = TPM_BASE + 45,
+ TPM_BAD_VERSION = TPM_BASE + 46,
+ TPM_NO_WRAP_TRANSPORT = TPM_BASE + 47,
+ TPM_AUDITFAIL_UNSUCCESSFUL = TPM_BASE + 48,
+ TPM_AUDITFAIL_SUCCESSFUL = TPM_BASE + 49,
+ TPM_NOTRESETABLE = TPM_BASE + 50,
+ TPM_NOTLOCAL = TPM_BASE + 51,
+ TPM_BAD_TYPE = TPM_BASE + 52,
+ TPM_INVALID_RESOURCE = TPM_BASE + 53,
+ TPM_NOTFIPS = TPM_BASE + 54,
+ TPM_INVALID_FAMILY = TPM_BASE + 55,
+ TPM_NO_NV_PERMISSION = TPM_BASE + 56,
+ TPM_REQUIRES_SIGN = TPM_BASE + 57,
+ TPM_KEY_NOTSUPPORTED = TPM_BASE + 58,
+ TPM_AUTH_CONFLICT = TPM_BASE + 59,
+ TPM_AREA_LOCKED = TPM_BASE + 60,
+ TPM_BAD_LOCALITY = TPM_BASE + 61,
+ TPM_READ_ONLY = TPM_BASE + 62,
+ TPM_PER_NOWRITE = TPM_BASE + 63,
+ TPM_FAMILY_COUNT = TPM_BASE + 64,
+ TPM_WRITE_LOCKED = TPM_BASE + 65,
+ TPM_BAD_ATTRIBUTES = TPM_BASE + 66,
+ TPM_INVALID_STRUCTURE = TPM_BASE + 67,
+ TPM_KEY_OWNER_CONTROL = TPM_BASE + 68,
+ TPM_BAD_COUNTER = TPM_BASE + 69,
+ TPM_NOT_FULLWRITE = TPM_BASE + 70,
+ TPM_CONTEXT_GAP = TPM_BASE + 71,
+ TPM_MAXNVWRITES = TPM_BASE + 72,
+ TPM_NOOPERATOR = TPM_BASE + 73,
+ TPM_RESOURCEMISSING = TPM_BASE + 74,
+ TPM_DELEGATE_LOCK = TPM_BASE + 75,
+ TPM_DELEGATE_FAMILY = TPM_BASE + 76,
+ TPM_DELEGATE_ADMIN = TPM_BASE + 77,
+ TPM_TRANSPORT_NOTEXCLUSIVE = TPM_BASE + 78,
+ TPM_OWNER_CONTROL = TPM_BASE + 79,
+ TPM_DAA_RESOURCES = TPM_BASE + 80,
+ TPM_DAA_INPUT_DATA0 = TPM_BASE + 81,
+ TPM_DAA_INPUT_DATA1 = TPM_BASE + 82,
+ TPM_DAA_ISSUER_SETTINGS = TPM_BASE + 83,
+ TPM_DAA_TPM_SETTINGS = TPM_BASE + 84,
+ TPM_DAA_STAGE = TPM_BASE + 85,
+ TPM_DAA_ISSUER_VALIDITY = TPM_BASE + 86,
+ TPM_DAA_WRONG_W = TPM_BASE + 87,
+ TPM_BAD_HANDLE = TPM_BASE + 88,
+ TPM_BAD_DELEGATE = TPM_BASE + 89,
+ TPM_BADCONTEXT = TPM_BASE + 90,
+ TPM_TOOMANYCONTEXTS = TPM_BASE + 91,
+ TPM_MA_TICKET_SIGNATURE = TPM_BASE + 92,
+ TPM_MA_DESTINATION = TPM_BASE + 93,
+ TPM_MA_SOURCE = TPM_BASE + 94,
+ TPM_MA_AUTHORITY = TPM_BASE + 95,
+ TPM_PERMANENTEK = TPM_BASE + 97,
+ TPM_BAD_SIGNATURE = TPM_BASE + 98,
+ TPM_NOCONTEXTSPACE = TPM_BASE + 99,
+ /* TPM-defined non-fatal errors */
+ TPM_RETRY = TPM_BASE + TPM_NON_FATAL,
+ TPM_NEEDS_SELFTEST = TPM_BASE + TPM_NON_FATAL + 1,
+ TPM_DOING_SELFTEST = TPM_BASE + TPM_NON_FATAL + 2,
+ TPM_DEFEND_LOCK_RUNNING = TPM_BASE + TPM_NON_FATAL + 3,
+};
+
+struct tpm_permanent_flags {
+ __be16 tag;
+ u8 disable;
+ u8 ownership;
+ u8 deactivated;
+ u8 read_pubek;
+ u8 disable_owner_clear;
+ u8 allow_maintenance;
+ u8 physical_presence_lifetime_lock;
+ u8 physical_presence_hw_enable;
+ u8 physical_presence_cmd_enable;
+ u8 cekp_used;
+ u8 tpm_post;
+ u8 tpm_post_lock;
+ u8 fips;
+ u8 operator;
+ u8 enable_revoke_ek;
+ u8 nv_locked;
+ u8 read_srk_pub;
+ u8 tpm_established;
+ u8 maintenance_done;
+ u8 disable_full_da_logic_info;
+} __packed;
+
+#ifdef CONFIG_DM_TPM
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE 1260
+
+/**
+ * struct tpm_chip_priv - Information about a TPM, stored by the uclass
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * These values must be set up by the device's probe() method before
+ * communcation is attempted. If the device has an xfer() method, this is
+ * not needed. There is no need to set up @buf.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * @duration_ms: Length of each duration type in milliseconds
+ * @retry_time_ms: Time to wait before retrying receive
+ */
+struct tpm_chip_priv {
+ uint duration_ms[TPM_DURATION_COUNT];
+ uint retry_time_ms;
+ u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
+};
+
+/**
+ * struct tpm_ops - low-level TPM operations
+ *
+ * These are designed to avoid loops and delays in the driver itself. These
+ * should be handled in the uclass.
+ *
+ * In gneral you should implement everything except xfer(). Where you need
+ * complete control of the transfer, then xfer() can be provided and will
+ * override the other methods.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * This interface is for low-level TPM access. It does not understand the
+ * concept of localities or the various TPM messages. That interface is
+ * defined in the functions later on in this file, but they all translate
+ * to bytes which are sent and received.
*/
+struct tpm_ops {
+ /**
+ * open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller should call
+ * close().
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*open)(struct udevice *dev);
-#ifndef _INCLUDE_TPM_H_
-#define _INCLUDE_TPM_H_
+ /**
+ * close() - Close the current session
+ *
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*close)(struct udevice *dev);
-#include <common.h>
+ /**
+ * get_desc() - Get a text description of the TPM
+ *
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+ int (*get_desc)(struct udevice *dev, char *buf, int size);
-/*
- * tis_init()
+ /**
+ * send() - send data to the TPM
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ *
+ * Returns 0 on success or -ve on failure.
+ */
+ int (*send)(struct udevice *dev, const uint8_t *sendbuf,
+ size_t send_size);
+
+ /**
+ * recv() - receive a response from the TPM
+ *
+ * @dev: Device to talk to
+ * @recvbuf: Buffer to save the response to
+ * @max_size: Maximum number of bytes to receive
+ *
+ * Returns number of bytes received on success, -EAGAIN if the TPM
+ * response is not ready, -EINTR if cancelled, or other -ve value on
+ * failure.
+ */
+ int (*recv)(struct udevice *dev, uint8_t *recvbuf, size_t max_size);
+
+ /**
+ * cleanup() - clean up after an operation in progress
+ *
+ * This is called if receiving times out. The TPM may need to abort
+ * the current transaction if it did not complete, and make itself
+ * ready for another.
+ *
+ * @dev: Device to talk to
+ */
+ int (*cleanup)(struct udevice *dev);
+
+ /**
+ * xfer() - send data to the TPM and get response
+ *
+ * This method is optional. If it exists it is used in preference
+ * to send(), recv() and cleanup(). It should handle all aspects of
+ * TPM communication for a single transfer.
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ * @recvbuf: Buffer to save the response to
+ * @recv_size: Pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_size) or -ve on failure.
+ */
+ int (*xfer)(struct udevice *dev, const uint8_t *sendbuf,
+ size_t send_size, uint8_t *recvbuf, size_t *recv_size);
+};
+
+#define tpm_get_ops(dev) ((struct tpm_ops *)device_get_ops(dev))
+
+/**
+ * tpm_open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller is supposed to
+ * call tpm_close().
*
- * Initialize the TPM device. Returns 0 on success or -1 on
- * failure (in case device probing did not succeed).
+ * Returns 0 on success, -ve on failure.
*/
-int tis_init(void);
+int tpm_open(struct udevice *dev);
-/*
- * tis_open()
- *
- * Requests access to locality 0 for the caller. After all commands have been
- * completed the caller is supposed to call tis_close().
+/**
+ * tpm_close() - Close the current session
*
- * Returns 0 on success, -1 on failure.
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
*/
-int tis_open(void);
+int tpm_close(struct udevice *dev);
-/*
- * tis_close()
+/**
+ * tpm_get_desc() - Get a text description of the TPM
*
- * terminate the currect session with the TPM by releasing the locked
- * locality. Returns 0 on success of -1 on failure (in case lock
- * removal did not succeed).
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
*/
-int tis_close(void);
+int tpm_get_desc(struct udevice *dev, char *buf, int size);
-/*
- * tis_sendrecv()
+/**
+ * tpm_xfer() - send data to the TPM and get response
+ *
+ * This first uses the device's send() method to send the bytes. Then it calls
+ * recv() to get the reply. If recv() returns -EAGAIN then it will delay a
+ * short time and then call recv() again.
*
- * Send the requested data to the TPM and then try to get its response
+ * Regardless of whether recv() completes successfully, it will then call
+ * cleanup() to finish the transaction.
+ *
+ * Note that the outgoing data is inspected to determine command type
+ * (ordinal) and a timeout is used for that command type.
*
* @sendbuf - buffer of the data to send
* @send_size size of the data to send
* @recvbuf - memory to save the response to
* @recv_len - pointer to the size of the response buffer
*
- * Returns 0 on success (and places the number of response bytes at recv_len)
- * or -1 on failure.
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_len) or -ve on failure.
+ */
+int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size,
+ uint8_t *recvbuf, size_t *recv_size);
+
+#endif /* CONFIG_DM_TPM */
+
+/**
+ * Initialize TPM device. It must be called before any TPM commands.
+ *
+ * @return 0 on success, non-0 on error.
+ */
+int tpm_init(void);
+
+/**
+ * Issue a TPM_Startup command.
+ *
+ * @param mode TPM startup mode
+ * @return return code of the operation
+ */
+uint32_t tpm_startup(enum tpm_startup_type mode);
+
+/**
+ * Issue a TPM_SelfTestFull command.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_self_test_full(void);
+
+/**
+ * Issue a TPM_ContinueSelfTest command.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_continue_self_test(void);
+
+/**
+ * Issue a TPM_NV_DefineSpace command. The implementation is limited
+ * to specify TPM_NV_ATTRIBUTES and size of the area. The area index
+ * could be one of the special value listed in enum tpm_nv_index.
+ *
+ * @param index index of the area
+ * @param perm TPM_NV_ATTRIBUTES of the area
+ * @param size size of the area
+ * @return return code of the operation
+ */
+uint32_t tpm_nv_define_space(uint32_t index, uint32_t perm, uint32_t size);
+
+/**
+ * Issue a TPM_NV_ReadValue command. This implementation is limited
+ * to read the area from offset 0. The area index could be one of
+ * the special value listed in enum tpm_nv_index.
+ *
+ * @param index index of the area
+ * @param data output buffer of the area contents
+ * @param count size of output buffer
+ * @return return code of the operation
+ */
+uint32_t tpm_nv_read_value(uint32_t index, void *data, uint32_t count);
+
+/**
+ * Issue a TPM_NV_WriteValue command. This implementation is limited
+ * to write the area from offset 0. The area index could be one of
+ * the special value listed in enum tpm_nv_index.
+ *
+ * @param index index of the area
+ * @param data input buffer to be wrote to the area
+ * @param length length of data bytes of input buffer
+ * @return return code of the operation
+ */
+uint32_t tpm_nv_write_value(uint32_t index, const void *data, uint32_t length);
+
+/**
+ * Issue a TPM_Extend command.
+ *
+ * @param index index of the PCR
+ * @param in_digest 160-bit value representing the event to be
+ * recorded
+ * @param out_digest 160-bit PCR value after execution of the
+ * command
+ * @return return code of the operation
+ */
+uint32_t tpm_extend(uint32_t index, const void *in_digest, void *out_digest);
+
+/**
+ * Issue a TPM_PCRRead command.
+ *
+ * @param index index of the PCR
+ * @param data output buffer for contents of the named PCR
+ * @param count size of output buffer
+ * @return return code of the operation
+ */
+uint32_t tpm_pcr_read(uint32_t index, void *data, size_t count);
+
+/**
+ * Issue a TSC_PhysicalPresence command. TPM physical presence flag
+ * is bit-wise OR'ed of flags listed in enum tpm_physical_presence.
+ *
+ * @param presence TPM physical presence flag
+ * @return return code of the operation
+ */
+uint32_t tpm_tsc_physical_presence(uint16_t presence);
+
+/**
+ * Issue a TPM_ReadPubek command.
+ *
+ * @param data output buffer for the public endorsement key
+ * @param count size of ouput buffer
+ * @return return code of the operation
+ */
+uint32_t tpm_read_pubek(void *data, size_t count);
+
+/**
+ * Issue a TPM_ForceClear command.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_force_clear(void);
+
+/**
+ * Issue a TPM_PhysicalEnable command.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_physical_enable(void);
+
+/**
+ * Issue a TPM_PhysicalDisable command.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_physical_disable(void);
+
+/**
+ * Issue a TPM_PhysicalSetDeactivated command.
+ *
+ * @param state boolean state of the deactivated flag
+ * @return return code of the operation
+ */
+uint32_t tpm_physical_set_deactivated(uint8_t state);
+
+/**
+ * Issue a TPM_GetCapability command. This implementation is limited
+ * to query sub_cap index that is 4-byte wide.
+ *
+ * @param cap_area partition of capabilities
+ * @param sub_cap further definition of capability, which is
+ * limited to be 4-byte wide
+ * @param cap output buffer for capability information
+ * @param count size of ouput buffer
+ * @return return code of the operation
+ */
+uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap,
+ void *cap, size_t count);
+
+/**
+ * Issue a TPM_FlushSpecific command for a AUTH ressource.
+ *
+ * @param auth_handle handle of the auth session
+ * @return return code of the operation
+ */
+uint32_t tpm_terminate_auth_session(uint32_t auth_handle);
+
+/**
+ * Issue a TPM_OIAP command to setup an object independant authorization
+ * session.
+ * Information about the session is stored internally.
+ * If there was already an OIAP session active it is terminated and a new
+ * session is set up.
+ *
+ * @param auth_handle pointer to the (new) auth handle or NULL.
+ * @return return code of the operation
+ */
+uint32_t tpm_oiap(uint32_t *auth_handle);
+
+/**
+ * Ends an active OIAP session.
+ *
+ * @return return code of the operation
+ */
+uint32_t tpm_end_oiap(void);
+
+/**
+ * Issue a TPM_LoadKey2 (Auth1) command using an OIAP session for authenticating
+ * the usage of the parent key.
+ *
+ * @param parent_handle handle of the parent key.
+ * @param key pointer to the key structure (TPM_KEY or TPM_KEY12).
+ * @param key_length size of the key structure
+ * @param parent_key_usage_auth usage auth for the parent key
+ * @param key_handle pointer to the key handle
+ * @return return code of the operation
+ */
+uint32_t tpm_load_key2_oiap(uint32_t parent_handle,
+ const void *key, size_t key_length,
+ const void *parent_key_usage_auth,
+ uint32_t *key_handle);
+
+/**
+ * Issue a TPM_GetPubKey (Auth1) command using an OIAP session for
+ * authenticating the usage of the key.
+ *
+ * @param key_handle handle of the key
+ * @param usage_auth usage auth for the key
+ * @param pubkey pointer to the pub key buffer; may be NULL if the pubkey
+ * should not be stored.
+ * @param pubkey_len pointer to the pub key buffer len. On entry: the size of
+ * the provided pubkey buffer. On successful exit: the size
+ * of the stored TPM_PUBKEY structure (iff pubkey != NULL).
+ * @return return code of the operation
+ */
+uint32_t tpm_get_pub_key_oiap(uint32_t key_handle, const void *usage_auth,
+ void *pubkey, size_t *pubkey_len);
+
+/**
+ * Get the TPM permanent flags value
+ *
+ * @param pflags Place to put permanent flags
+ * @return return code of the operation
+ */
+uint32_t tpm_get_permanent_flags(struct tpm_permanent_flags *pflags);
+
+/**
+ * Get the TPM permissions
+ *
+ * @param perm Returns permissions value
+ * @return return code of the operation
*/
-int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf,
- size_t *recv_len);
+uint32_t tpm_get_permissions(uint32_t index, uint32_t *perm);
-#endif /* _INCLUDE_TPM_H_ */
+#endif /* __TPM_H */
projects / karo-tx-uboot.git / blobdiff