tpm: Move the I2C TPM code into one file

[karo-tx-uboot.git] / include / twl4030.h

diff --git a/include/twl4030.h b/include/twl4030.h
index 18795a601b58b00e5e0abc01d075ea9a23cf1d73..103137372d309c2d2e906297d619d5841040e04f 100644 (file)
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -129,14 +129,6 @@
 #define TWL4030_PM_MASTER_BB_CFG                       0x6D
 #define TWL4030_PM_MASTER_MISC_TST                     0x6E
 #define TWL4030_PM_MASTER_TRIM1                                0x6F
-/* P[1-3]_SW_EVENTS */
-#define TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON       (1 << 6)
-#define TWL4030_PM_MASTER_SW_EVENTS_STOPON_SYSEN       (1 << 5)
-#define TWL4030_PM_MASTER_SW_EVENTS_ENABLE_WARMRESET   (1 << 4)
-#define TWL4030_PM_MASTER_SW_EVENTS_LVL_WAKEUP         (1 << 3)
-#define TWL4030_PM_MASTER_SW_EVENTS_DEVACT             (1 << 2)
-#define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP             (1 << 1)
-#define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF             (1 << 0)
 
 /* Power bus message definitions */
 
@@ -207,6 +199,34 @@
 /* Power Reference */
 #define RES_Main_Ref            28
 
+/* P[1-3]_SW_EVENTS */
+#define TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON       (1 << 6)
+#define TWL4030_PM_MASTER_SW_EVENTS_STOPON_SYSEN       (1 << 5)
+#define TWL4030_PM_MASTER_SW_EVENTS_ENABLE_WARMRESET   (1 << 4)
+#define TWL4030_PM_MASTER_SW_EVENTS_LVL_WAKEUP         (1 << 3)
+#define TWL4030_PM_MASTER_SW_EVENTS_DEVACT             (1 << 2)
+#define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP             (1 << 1)
+#define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF             (1 << 0)
+
+/* HW conditions */
+#define TWL4030_PM_MASTER_STS_HW_CONDITIONS_PWON       (1 << 0)
+#define TWL4030_PM_MASTER_STS_HW_CONDITIONS_CHG                (1 << 1)
+#define TWL4030_PM_MASTER_STS_HW_CONDITIONS_USB                (1 << 2)
+#define TWL4030_PM_MASTER_STS_HW_CONDITIONS_VBUS       (1 << 7)
+
+/* Power transition */
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_PWON  (1 << 0)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_CHG   (1 << 1)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_USB   (1 << 2)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_RTC   (1 << 3)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT  (1 << 4)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBUS  (1 << 5)
+#define TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_SWBUG (1 << 7)
+
+/* PWRANA2 */
+#define TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV      (1 << 1)
+#define TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV      (1 << 2)
+
 #define TOTAL_RESOURCES                28
 /*
  * Power Bus Message Format ... these can be sent individually by Linux,
@@ -390,6 +410,8 @@
 
 /* Voltage Selection in PM Receiver Module */
 #define TWL4030_PM_RECEIVER_VAUX2_VSEL_18              0x05
+#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28              0x09
+#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18              0x01
 #define TWL4030_PM_RECEIVER_VAUX3_VSEL_28              0x03
 #define TWL4030_PM_RECEIVER_VPLL2_VSEL_18              0x05
 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18               0x03
@@ -643,13 +665,26 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
 
 /* For hardware resetting */
 void twl4030_power_reset_init(void);
+/* For power off */
+void twl4030_power_off(void);
 /* For setting device group and voltage */
 void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
                             u8 dev_grp, u8 dev_grp_sel);
 /* For initializing power device */
 void twl4030_power_init(void);
 /* For initializing mmc power */
-void twl4030_power_mmc_init(void);
+void twl4030_power_mmc_init(int dev_index);
+
+/*
+ * Input
+ */
+
+int twl4030_input_power_button(void);
+int twl4030_input_charger(void);
+int twl4030_input_usb(void);
+
+int twl4030_keypad_scan(unsigned char *matrix);
+int twl4030_keypad_key(unsigned char *matrix, u8 c, u8 r);
 
 /*
  * LED