* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
u32 i2c1_clk;
#if !defined(CONFIG_MPC832X)
u32 i2c2_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
#endif
u32 enc_clk;
u32 lbiu_clk;
u32 qe_clk;
u32 brg_clk;
#endif
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+ u32 sata_clk;
+#endif
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
break;
default:
/* unkown SCCR_TSEC1CM value */
- return -4;
+ return -2;
}
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
break;
default:
/* unkown SCCR_USBDRCM value */
- return -8;
+ return -3;
}
#endif
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
break;
default:
/* unkown SCCR_TSEC2CM value */
- return -5;
+ return -4;
}
+#elif defined(CONFIG_MPC831X)
+ tsec2_clk = tsec1_clk;
- i2c1_clk = tsec2_clk;
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
+#endif
+#if defined(CONFIG_MPC834X)
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
break;
default:
/* unkown SCCR_USBMPHCM value */
- return -7;
+ return -5;
}
if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
* USB DR clock is not disabled then
* USB MPH & USB DR must have the same rate
*/
- return -9;
+ return -6;
+ }
+#endif
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -7;
}
-#elif defined(CONFIG_MPC831X)
- tsec2_clk = tsec1_clk;
- if (!(sccr & SCCR_TSEC1ON))
- tsec1_clk = 0;
- if (!(sccr & SCCR_TSEC2ON))
- tsec2_clk = 0;
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
+ case 0:
+ sdhc_clk = 0;
+ break;
+ case 1:
+ sdhc_clk = csb_clk;
+ break;
+ case 2:
+ sdhc_clk = csb_clk / 2;
+ break;
+ case 3:
+ sdhc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SDHCCM value */
+ return -8;
+ }
#endif
-#if !defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X)
+ i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837X)
+ i2c1_clk = sdhc_clk;
#endif
#if !defined(CONFIG_MPC832X)
- i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
- enc_clk = 0;
+ pciexp1_clk = 0;
break;
case 1:
- enc_clk = csb_clk;
+ pciexp1_clk = csb_clk;
break;
case 2:
- enc_clk = csb_clk / 2;
+ pciexp1_clk = csb_clk / 2;
break;
case 3:
- enc_clk = csb_clk / 3;
+ pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
- return -6;
+ /* unkown SCCR_PCIEXP1CM value */
+ return -9;
}
+ switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+ case 0:
+ pciexp2_clk = 0;
+ break;
+ case 1:
+ pciexp2_clk = csb_clk;
+ break;
+ case 2:
+ pciexp2_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP2CM value */
+ return -10;
+ }
+#endif
+
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+ case 0:
+ sata_clk = 0;
+ break;
+ case 1:
+ sata_clk = csb_clk;
+ break;
+ case 2:
+ sata_clk = csb_clk / 2;
+ break;
+ case 3:
+ sata_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SATA1CM value */
+ return -11;
+ }
+#endif
+
lbiu_clk = csb_clk *
(1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
break;
default:
/* unknown lcrr */
- return -10;
+ return -12;
}
ddr_clk = csb_clk *
break;
default:
/* unkown core to csb ratio */
- return -12;
+ return -13;
}
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
#endif
gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834X)
gd->usbmph_clk = usbmph_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->sdhc_clk = sdhc_clk;
#endif
gd->core_clk = core_clk;
gd->i2c1_clk = i2c1_clk;
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
gd->qe_clk = qe_clk;
gd->brg_clk = brg_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->pciexp1_clk = pciexp1_clk;
+ gd->pciexp2_clk = pciexp2_clk;
+ gd->sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
gd->cpu_clk = gd->core_clk;
#if !defined(CONFIG_MPC832X)
printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
#endif
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC837X)
+ printf(" SDHC: %4d MHz\n", gd->sdhc_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000);
#endif
#if defined(CONFIG_MPC834X)
printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" PCIEXP1: %4d MHz\n", gd->pciexp1_clk / 1000000);
+ printf(" PCIEXP2: %4d MHz\n", gd->pciexp2_clk / 1000000);
+ printf(" SATA: %4d MHz\n", gd->sata_clk / 1000000);
#endif
return 0;
}
/*
- * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
*
* MPC83xx Internal Memory Map
*
u8 res6[0x0C];
u32 ddrcdr; /* DDR Control Driver Register */
u32 ddrdsr; /* DDR Debug Status Register */
- u8 res7[0xD0];
+ u32 obir; /* Output Buffer Impedance Register */
+ u8 res7[0xCC];
} sysconf83xx_t;
/*
u8 fixme[0x10000];
} security83xx_t;
+/*
+ * PCI Express
+ */
+typedef struct pex83xx {
+ u8 fixme[0x1000];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+ u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+ u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+ u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+ u8 mem[0x10000];
+} rom83xx_t;
+
#if defined(CONFIG_MPC834X)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
u8 res7[0xC0000];
} immap_t;
+#elif defined(CONFIG_MPC837X)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x1200];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xd000];
+ sata83xx_t sata[4]; /* SATA Controller */
+ u8 res7[0x7000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res8[0x8000];
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res9[0x1000];
+ security83xx_t security;
+ u8 res10[0xA3000];
+ serdes83xx_t serdes[2]; /* SerDes Registers */
+ u8 res11[0xCE00];
+ rom83xx_t rom; /* On Chip ROM */
+} immap_t;
+
#elif defined(CONFIG_MPC8360)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#define SPR_8321E_REV11 0x80660011
#define SPR_8321_REV11 0x80670011
-#define SPR_8311_REV10 0x80B30010
-#define SPR_8311E_REV10 0x80B20010
-#define SPR_8313_REV10 0x80B10010
#define SPR_8313E_REV10 0x80B00010
+#define SPR_8313_REV10 0x80B10010
+#define SPR_8311E_REV10 0x80B20010
+#define SPR_8311_REV10 0x80B30010
+
+#define SPR_8379E_REV10 0x80C20010
+#define SPR_8379_REV10 0x80C30010
+#define SPR_8378E_REV10 0x80C40010
+#define SPR_8378_REV10 0x80C50010
+#define SPR_8377E_REV10 0x80C60010
+#define SPR_8377_REV10 0x80C70010
/* SPCR - System Priority Configuration Register
*/
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
-#elif defined(CONFIG_MPC831X)
-/* SPCR bits - MPC831x specific */
+#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+/* SPCR bits - MPC831x and MPC837x specific */
#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
#define SPCR_TSECDP_SHIFT (31-19)
#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
+#elif defined(CONFIG_MPC837X)
+/* SICRL bits - MPC837x specific */
+#define SICRL_USB_A 0xC0000000
+#define SICRL_USB_B 0x30000000
+#define SICRL_UART 0x0C000000
+#define SICRL_GPIO_A 0x02000000
+#define SICRL_GPIO_B 0x01000000
+#define SICRL_GPIO_C 0x00800000
+#define SICRL_GPIO_D 0x00400000
+#define SICRL_GPIO_E 0x00200000
+#define SICRL_GPIO_F 0x00180000
+#define SICRL_GPIO_G 0x00040000
+#define SICRL_GPIO_H 0x00020000
+#define SICRL_GPIO_I 0x00010000
+#define SICRL_GPIO_J 0x00008000
+#define SICRL_GPIO_K 0x00004000
+#define SICRL_GPIO_L 0x00003000
+#define SICRL_DMA_A 0x00000800
+#define SICRL_DMA_B 0x00000400
+#define SICRL_DMA_C 0x00000200
+#define SICRL_DMA_D 0x00000100
+#define SICRL_DMA_E 0x00000080
+#define SICRL_DMA_F 0x00000040
+#define SICRL_DMA_G 0x00000020
+#define SICRL_DMA_H 0x00000010
+#define SICRL_DMA_I 0x00000008
+#define SICRL_DMA_J 0x00000004
+#define SICRL_LDP_A 0x00000002
+#define SICRL_LDP_B 0x00000001
+
+/* SICRH bits - MPC837x specific */
+#define SICRH_DDR 0x80000000
+#define SICRH_TSEC1_A 0x10000000
+#define SICRH_TSEC1_B 0x08000000
+#define SICRH_TSEC2_A 0x00400000
+#define SICRH_TSEC2_B 0x00200000
+#define SICRH_TSEC2_C 0x00100000
+#define SICRH_TSEC2_D 0x00080000
+#define SICRH_TSEC2_E 0x00040000
+#define SICRH_TMR 0x00010000
+#define SICRH_GPIO2_A 0x00008000
+#define SICRH_GPIO2_B 0x00004000
+#define SICRH_GPIO2_C 0x00002000
+#define SICRH_GPIO2_D 0x00001000
+#define SICRH_GPIO2_E 0x00000C00
+#define SICRH_GPIO2_F 0x00000300
+#define SICRH_GPIO2_G 0x000000C0
+#define SICRH_GPIO2_H 0x00000030
+#define SICRH_SPI 0x00000003
#endif
/* SWCRR - System Watchdog Control Register
#define HRCWL_CE_TO_PLL_1X29 0x0000001D
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+
+#elif defined(CONFIG_MPC837X)
+#define HRCWL_SVCOD 0x30000000
+#define HRCWL_SVCOD_SHIFT 28
+#define HRCWL_SVCOD_DIV_4 0x00000000
+#define HRCWL_SVCOD_DIV_8 0x10000000
+#define HRCWL_SVCOD_DIV_2 0x20000000
+#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/* HRCWH - Hardware Reset Configuration Word High
#if defined(CONFIG_MPC834X)
#define HRCWH_ROM_LOC_PCI2 0x00200000
#endif
+#if defined(CONIFG_MPC837X)
+#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000
+#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
-#if defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
/* RSR - Reset Status Register
*/
+#if defined(CONFIG_MPC837X)
+#define RSR_RSTSRC 0xF0000000 /* Reset source */
+#define RSR_RSTSRC_SHIFT 28
+#else
#define RSR_RSTSRC 0xE0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 29
+#endif
#define RSR_BSF 0x00010000 /* Boot seq. fail */
#define RSR_BSF_SHIFT 16
#define RSR_SWSR 0x00002000 /* software soft reset */
#define SCCR_PCICM 0x00010000
#define SCCR_PCICM_SHIFT 16
-/* SCCR bits - MPC8349 specific */
-#ifdef CONFIG_MPC834X
+#if defined(CONFIG_MPC834X)
+/* SCCR bits - MPC834x specific */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC1CM_0 0x00000000
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
+/* The MPH must have the same clock ratio as DR, unless its clock disabled */
+#define SCCR_USBMPHCM 0x00c00000
+#define SCCR_USBMPHCM_SHIFT 22
+#define SCCR_USBDRCM 0x00300000
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBCM 0x00f00000
+#define SCCR_USBCM_SHIFT 20
+#define SCCR_USBCM_0 0x00000000
+#define SCCR_USBCM_1 0x00500000
+#define SCCR_USBCM_2 0x00A00000
+#define SCCR_USBCM_3 0x00F00000
+
#elif defined(CONFIG_MPC831X)
/* TSEC1 bits are for TSEC2 as well */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC2ON 0x10000000
#define SCCR_TSEC2ON_SHIFT 28
-#endif
-
-#define SCCR_USBMPHCM 0x00c00000
-#define SCCR_USBMPHCM_SHIFT 22
#define SCCR_USBDRCM 0x00300000
#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00100000
+#define SCCR_USBDRCM_2 0x00200000
+#define SCCR_USBDRCM_3 0x00300000
-#define SCCR_USBCM_0 0x00000000
-#define SCCR_USBCM_1 0x00500000
-#define SCCR_USBCM_2 0x00A00000
-#define SCCR_USBCM_3 0x00F00000
+#elif defined(CONFIG_MPC837X)
+/* SCCR bits - MPC837x specific */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+
+#define SCCR_TSEC2CM 0x30000000
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
+
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
+#define SCCR_USBDRCM 0x00c00000
+#define SCCR_USBDRCM_SHIFT 22
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00400000
+#define SCCR_USBDRCM_2 0x00800000
+#define SCCR_USBDRCM_3 0x00c00000
+
+#define SCCR_PCIEXP1CM 0x00300000
+#define SCCR_PCIEXP1CM_SHIFT 20
+#define SCCR_PCIEXP1CM_0 0x00000000
+#define SCCR_PCIEXP1CM_1 0x00100000
+#define SCCR_PCIEXP1CM_2 0x00200000
+#define SCCR_PCIEXP1CM_3 0x00300000
+
+#define SCCR_PCIEXP2CM 0x000c0000
+#define SCCR_PCIEXP2CM_SHIFT 18
+#define SCCR_PCIEXP2CM_0 0x00000000
+#define SCCR_PCIEXP2CM_1 0x00040000
+#define SCCR_PCIEXP2CM_2 0x00080000
+#define SCCR_PCIEXP2CM_3 0x000c0000
+
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM 0x000000c0
+#define SCCR_SATA1CM_SHIFT 6
+#define SCCR_SATACM 0x000000ff
+#define SCCR_SATACM_SHIFT 0
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00000055
+#define SCCR_SATACM_2 0x000000aa
+#define SCCR_SATACM_3 0x000000ff
+#endif
/* CSn_BDNS - Chip Select memory Bounds Register
*/
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+#if !defined(CONFIG_MPC834X)
#define BR_ATOM 0x0000000C
#define BR_ATOM_SHIFT 2
#endif
#if defined(CONFIG_MPC834X)
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#elif defined(CONFIG_MPC8360)
+#else
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
#endif
#define LTESR_CS 0x00080000
#define LTESR_CC 0x00000001
-/* DDR Control Driver Register
+/* DDRCDR - DDR Control Driver Register
*/
#define DDRCDR_EN 0x40000000
#define DDRCDR_PZ 0x3C000000
projects / karo-tx-uboot.git / commitdiff