};
static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
#endif
+#if defined(CONFIG_APM821XX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "RESERVED",
+ "RESERVED",
+ "RESERVED",
+ "NAND (8 bits)",
+ "NOR (8 bits)",
+ "NOR (8 bits) w/PLL Bypassed",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
+#endif
#if defined(SDR0_PINSTP_SHIFT)
static int bootstrap_option(void)
strcpy(addstr, "No Security support");
break;
+ case PVR_APM821XX_RA:
+ puts("APM821XX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
case PVR_VIRTEX5:
puts("440x5 VIRTEX5");
break;
reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && \
+ !defined(CONFIG_APM821XX) &&!defined(CONFIG_SYS_4xx_GPIO_TABLE)
/*
* GPIO0 setup (select GPIO or alternate function)
*/
#if defined(CONFIG_405EX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
+ defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
/*
* Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
*/
#elif defined(CONFIG_440)
#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
+ defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
static u8 pll_fwdv_multi_bits[] = {
/* values for: 1 - 16 */
0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
return 0;
}
+#if defined(CONFIG_APM821XX)
+
+void get_sys_info(sys_info_t *sysInfo)
+{
+ unsigned long plld;
+ unsigned long temp;
+ unsigned long mul;
+ unsigned long cpudv;
+ unsigned long plb2dv;
+ unsigned long ddr2dv;
+
+ /* Calculate Forward divisor A and Feeback divisor */
+ mfcpr(CPR0_PLLD, plld);
+
+ temp = CPR0_PLLD_FWDVA(plld);
+ sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
+
+ temp = CPR0_PLLD_FDV(plld);
+ sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
+
+ /* Calculate OPB clock divisor */
+ mfcpr(CPR0_OPBD, temp);
+ temp = CPR0_OPBD_OPBDV(temp);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ /* Calculate Peripheral clock divisor */
+ mfcpr(CPR0_PERD, temp);
+ temp = CPR0_PERD_PERDV(temp);
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ /* Calculate CPU clock divisor */
+ mfcpr(CPR0_CPUD, temp);
+ temp = CPR0_CPUD_CPUDV(temp);
+ cpudv = temp ? temp : 8;
+
+ /* Calculate PLB2 clock divisor */
+ mfcpr(CPR0_PLB2D, temp);
+ temp = CPR0_PLB2D_PLB2DV(temp);
+ plb2dv = temp ? temp : 4;
+
+ /* Calculate DDR2 clock divisor */
+ mfcpr(CPR0_DDR2D, temp);
+ temp = CPR0_DDR2D_DDR2DV(temp);
+ ddr2dv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfcpr(CPR0_PLLC, temp);
+ temp = CPR0_PLLC_SEL(temp);
+ if (temp == 0) {
+ /* PLL internal feedback */
+ mul = sysInfo->pllFbkDiv;
+ } else {
+ /* PLL PerClk feedback */
+ mul = sysInfo->pllFwdDivA * sysInfo->pllFbkDiv * cpudv
+ * plb2dv * 2 * sysInfo->pllOpbDiv *
+ sysInfo->pllExtBusDiv;
+ }
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (mul * CONFIG_SYS_CLK_FREQ) + (mul >> 1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz /
+ sysInfo->pllFwdDivA / cpudv;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz /
+ sysInfo->pllFwdDivA / cpudv / plb2dv / 2;
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqDDR = sysInfo->freqVCOMhz /
+ sysInfo->pllFwdDivA / cpudv / ddr2dv / 2;
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+#else
/*
* AMCC_TODO: verify this routine against latest EAS, cause stuff changed
* with latest EAS
return;
}
+#endif
#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460SX)
mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
lis r1, 0x0000
ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
mtdcr L2_CACHE_CFG,r1
lis r1, 0x8003
ori r1,r1, 0x0980 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || \
+ defined(CONFIG_460GT) || defined(CONFIG_APM821XX)
lis r1,0x0000 /* BAS = X_0000_0000 */
ori r1,r1,0x0984 /* first 64k */
mtdcr ISRAM0_SB0CR,r1
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,ISRAM1_DPC
mtdcr ISRAM1_PMEG,r1
lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
+ ori r1,r1,ISRAM1_SIZE /* ocm size */
mtdcr ISRAM1_SB0CR,r1
#endif
#elif defined(CONFIG_460SX)
--- /dev/null
+/*
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tirumala R Marri <tmarri@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _APM821XX_H_
+#define _APM821XX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+/* Memory mapped registers */
+#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
+
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
+
+#define SDR0_SRST0_DMC 0x00200000
+#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
+
+/* AHB config. */
+#define AHB_TOP 0xA4
+#define AHB_BOT 0xA5
+
+/* clk divisors */
+#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
+#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
+#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
+#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
+#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
+#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000/* PLB Early Clk Div*/
+#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
+
+/*
+ + * Clocking Controller
+ + */
+#define CPR0_CLKUPD 0x0020
+#define CPR0_PLLC 0x0040
+#define CPR0_PLLC_SEL(pllc) (((pllc) & 0x01000000) >> 24)
+#define CPR0_PLLD 0x0060
+#define CPR0_PLLD_FDV(plld) (((plld) & 0xff000000) >> 24)
+#define CPR0_PLLD_FWDVA(plld) (((plld) & 0x000f0000) >> 16)
+#define CPR0_CPUD 0x0080
+#define CPR0_CPUD_CPUDV(cpud) (((cpud) & 0x07000000) >> 24)
+#define CPR0_PLB2D 0x00a0
+#define CPR0_PLB2D_PLB2DV(plb2d) (((plb2d) & 0x06000000) >> 25)
+#define CPR0_OPBD 0x00c0
+#define CPR0_OPBD_OPBDV(opbd) (((opbd) & 0x03000000) >> 24)
+#define CPR0_PERD 0x00e0
+#define CPR0_PERD_PERDV(perd) (((perd) & 0x03000000) >> 24)
+#define CPR0_DDR2D 0x0100
+#define CPR0_DDR2D_DDR2DV(ddr2d) (((ddr2d) & 0x06000000) >> 25)
+#define CLK_ICFG 0x0140
+
+#endif /* _APM821XX_H_ */
#define EBC_NUM_BANKS 6
#endif
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_APM821XX)
#define EBC_NUM_BANKS 3
#endif
/*
* Internal SRAM
*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_APM821XX)
#define ISRAM0_DCR_BASE 0x380
#else
#define ISRAM0_DCR_BASE 0x020
#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
#define ISRAM1_DCR_BASE 0x0B0
#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/
#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */
#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */
#endif /* CONFIG_460EX || CONFIG_460GT */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define ISRAM1_SIZE 0x0984 /* OCM size 64k */
+#elif defined(CONFIG_APM821XX)
+#define ISRAM1_SIZE 0x0784 /* OCM size 32k */
+#endif
+
/*
* L2 Cache
*/
#if defined (CONFIG_440GX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
+ defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
#define L2_CACHE_BASE 0x030
#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */
#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */
*/
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
+ defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2)
/*
* Memory controller registers
*/
-#ifdef CONFIG_405EX
+#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
#define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */
#define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */
#define SDRAM_BEARL 0x02 /* PLB bus error address low */
#define SDRAM_PLBOPT 0x08 /* PLB slave options */
#define SDRAM_PUABA 0x09 /* PLB upper address base */
#define SDRAM_MCSTAT 0x1F /* memory controller status */
-#else /* CONFIG_405EX */
+#else /* CONFIG_405EX || CONFIG_APM821XX */
#define SDRAM_MCSTAT 0x14 /* memory controller status */
-#endif /* CONFIG_405EX */
+#endif /* CONFIG_405EX || CONFIG_APM821XX */
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
#define SDRAM_MEMODE 0x89 /* memory extended mode */
#define SDRAM_ECCES 0x98 /* ECC error status */
#define SDRAM_CID 0xA4 /* core ID */
-#ifndef CONFIG_405EX
+#if !defined(CONFIG_405EX) && !defined(CONFIG_APM821XX)
#define SDRAM_RID 0xA8 /* revision ID */
#endif
#define SDRAM_FCSR 0xB0 /* feedback calibration status */
#define SDRAM_RTSR 0xB1 /* run time status tracking */
-#ifdef CONFIG_405EX
+#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
#define SDRAM_RID 0xF8 /* revision ID */
#endif
*/
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
+ defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
#define UIC_MAX 4
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
#define VECNUM_ETH0 (32 + 28)
#endif /* CONFIG_440SPE */
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
/* UIC 0 */
#define VECNUM_UIC2NCI 10
#define VECNUM_UIC2CI 11
#include <asm/ppc460sx.h>
#endif
+#if defined(CONFIG_APM821XX)
+#include <asm/apm821xx.h>
+#endif
+
/*
* Configure which SDRAM/DDR/DDR2 controller is equipped
*/
#define PVR_460SX_RA_V1 0x13541801 /* 460SX rev A Variant 1 Security disabled */
#define PVR_460GX_RA 0x13541802 /* 460GX rev A */
#define PVR_460GX_RA_V1 0x13541803 /* 460GX rev A Variant 1 Security disabled */
+#define PVR_APM821XX_RA 0x12C41C80 /* APM821XX rev A */
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
projects / karo-tx-uboot.git / commitdiff