depends on AUTOBOOT
help
Delay before automatically running bootcmd;
+ set to 0 to autoboot with no delay, but you can stop it by key input.
set to -1 to disable autoboot.
set to -2 to autoboot with no delay and not check for abort
- (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined).
See doc/README.autoboot for details.
int abort;
uint64_t etime = endtick(bootdelay);
-#ifndef CONFIG_ZERO_BOOTDELAY_CHECK
- if (bootdelay == 0)
+ if (bootdelay < 0)
return 0;
-#endif
# ifdef CONFIG_AUTOBOOT_PROMPT
/*
printf("Hit any key to stop autoboot: %2d ", bootdelay);
#endif
-#if defined CONFIG_ZERO_BOOTDELAY_CHECK
/*
* Check if key already pressed
* Don't check if bootdelay < 0
abort = 1; /* don't auto boot */
}
}
-#endif
while ((bootdelay > 0) && (!abort)) {
--bootdelay;
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
CONFIG_SPI_BOOT=y
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_TARGET_BRXRE1=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_CAIRO=y
CONFIG_SPL=y
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Cairo # "
CONFIG_CMD_BOOTZ=y
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP"
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH"
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y
CONFIG_SPL=y
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_SYS_PROMPT="OMAP3_EVM # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y
CONFIG_SPL=y
-CONFIG_BOOTDELAY=0
+CONFIG_BOOTDELAY=-2
CONFIG_SYS_PROMPT="OMAP3_EVM # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
provides an escape sequence from the limited "password"
strings.
-
- CONFIG_ZERO_BOOTDELAY_CHECK
-
- If this option is defined, you can stop the autoboot process
- by hitting a key even in that case when "bootdelay" has been
- set to 0. You can set "bootdelay" to a negative value to
- prevent the check for console input.
-
CONFIG_RESET_TO_RETRY
(Only effective when CONFIG_BOOT_RETRY_TIME is also set)
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
#define CONFIG_CMDLINE_EDITING /* add command line history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.0.110
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
*/
#undef CONFIG_BOOTARGS
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_SYS_AUTOLOAD "n"
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
#define CONFIG_INITRD_TAG /* send initrd params */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin"
#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \
__stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTARGS ""
#define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;"
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */
#define CONFIG_RESET_TO_RETRY
/* devices */
/* Environment information */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
/* devices */
/* Environment information */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"baudrate=115200\0" \
#undef CONFIG_SPL_NAND_SUPPORT
#undef CONFIG_SYS_MONITOR_LEN
#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_ENV_SIZE (16 * 1024)
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
*/
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_MX_CYCLIC 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/*
* Configure PLL
*/
#define CONFIG_EXYNOS_DWMMC
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/* PWM */
#define CONFIG_PWM
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f*/
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CFG_ALT_MEMTEST
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
#define PLLMR0_DEFAULT PLLMR0_266_133_66
#define PLLMR1_DEFAULT PLLMR1_266_133_66
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/* new uImage format support */
#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
#define PLLMR0_DEFAULT PLLMR0_266_133_66
#define PLLMR1_DEFAULT PLLMR1_266_133_66
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
/* new uImage format support */
#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_SERIAL_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SETUP_INITRD_TAG
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_BOOTCOMMAND \
"if mmc rescan; then " \
"if run loadbootscr; then " \
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/*
* BOOTP options
*/
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_CMDLINE_EDITING /* cmd line edit/history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */
/* Hardware drivers */
#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
-/*-----------------------------------------------------------------------------
-Autobooting
------------------------------------------------------------------------------*/
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
- /* even with bootdelay=0 */
#undef CONFIG_BOOTARGS
#define CONFIG_PREBOOT "echo;" \
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_ENV_OVERWRITE 1
-/* check for keypress on bootdelay==0 */
-/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
-
#define CONFIG_SYS_TEXT_BASE 0x0FFC0000
#define CONFIG_SYS_SDRAM_BASE (0x08000000)
#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
",12m(modem)"\
",60m(qboot)\0"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/* partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOTLOADER "u-boot"
/* autoboot */
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.0.110
#define CONFIG_CMD_ONENAND
#define CONFIG_CMD_MTDPARTS
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
/* Boot options */
#define CONFIG_SYS_LOAD_ADDR 0x23000000
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
/* Boot options */
#define CONFIG_SYS_LOAD_ADDR 0x23000000
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_MISC_INIT_R
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
-#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
-
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PREBOOT
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SILENT_CONSOLE
-#define CONFIG_ZERO_BOOTDELAY_CHECK
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
/*
* Network Configuration
*/
"bootdelay=0\0"
#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#endif
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTARGS "console=ttyS2,115200n8"
#define CONFIG_LOADADDR 0x80008000
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CONFIG_LOADS_ECHO /* echo on for serial download */
projects / karo-tx-uboot.git / commitdiff