Changes since U-Boot 1.1.4:
======================================================================
-* Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40
- Patch from Scott McNutt, 11 Aug 2005
++* Add MCF5282 support (without preloader)
++ relocate ichache_State to ram
++ u-boot can run from internal flash
++ Add EB+MCF-EV123 board support.
++ Add m68k Boards to MAKEALL
++ Patch from Jens Scharsig, 08 Aug 2005
++
+* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
+ Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Add EPCS Controller bootrom work-around
+ -When booting from an epcs controller, the epcs bootrom may leave the
+ slave select in an asserted state causing soft reset hang. This
+ patch ensures slave select is negated at reset.
+ Patch by Scott McNutt, 08 Jun 2006
-* Update PK1C20 board for Nios-II 5.0
- Patch from Scott McNutt, 11 Aug 2005
+* Update PK1C20 board
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
+ Patch by Scott McNutt, 08 Jun 2006
-* Add EPCS Controller bootrom work-around for Nios-II
- Patch from Scott McNutt, 11 Aug 2005
- -When booting from an epcs controller, the epcs bootrom may leave the
- slave select in an asserted state causing soft reset hang. This
- patch ensures slave select is negated at reset.
-
-* Fix I/O Macros and mini-app stubs for Nios-II
- Patch from Scott McNutt, 11 Aug 2005
+* Nios II - Fix I/O Macros and mini-app stubs
-Fix asm/io.h macros
-Eliminate use of CACHE_BYPASS in cpu code
-Eliminate assembler warnings
#########################################################################
LIST_nios=" \
-- ADNPESC1 ADNPESC1_base_32 \
++ ADNPESC1 ADNPESC1_base_32 \
ADNPESC1_DNPEVA2_base_32 \
-- DK1C20 DK1C20_standard_32 \
-- DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20 \
++ DK1C20 DK1C20_standard_32 \
++ DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20 \
"
#########################################################################
## Nios-II Systems
#########################################################################
--LIST_nios2="PCI5441 PK1C20 EP1C20 EP1S10 EP1S40"
++LIST_nios2=" \
++ EP1C20 EP1S10 EP1S40 \
++ PCI5441 PK1C20 \
++"
#########################################################################
## MicroBlaze Systems
#########################################################################
--LIST_microblaze="suzaku"
++LIST_microblaze=" \
++ suzaku
++"
#########################################################################
-## M68K Systems
+## ColdFire Systems
#########################################################################
- LIST_coldfire="cobra5272 M5272C3 M5282EVB TASREG r5200 M5271EVB"
-LIST_m68k="\
- cobra5272 \
- EB+MCF-EV123 EB+MCF-EV123_internal \
- M5272C3 M5282EVB \
- TASREG \
++LIST_coldfire=" \
++ cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \
++ M5271EVB M5272C3 M5282EVB TASREG \
++ r5200 M5271EVB \
+ "
#-----------------------------------------------------------------------
ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
--#========================================================================
--# M68K
--#========================================================================
#########################################################################
## Coldfire
#########################################################################
cobra5272_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
++EB+MCF-EV123_config : unconfig
++ @ >include/config.h
++ @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
++ @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
++
++EB+MCF-EV123_internal_config : unconfig
++ @ >include/config.h
++ @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
++ @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
++
++M5271EVB_config : unconfig
++ @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
++
M5272C3_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
TASREG_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
- M5271EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
-
+r5200_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 r5200
+
#########################################################################
## MPC83xx Systems
#########################################################################
#ifdef CONFIG_M5282
int checkcpu (void)
{
- puts ("CPU: Freescale Coldfire MCF5282\n");
- unsigned char resetsource;
++ unsigned char resetsource = MCFRESET_RSR;
+
- printf ("CPU: MOTOROLA Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n",
++ printf ("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n",
+ MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK);
- puts ("Reset: ");
- resetsource = MCFRESET_RSR;
- if (resetsource & MCFRESET_RSR_LOL) puts("Lose-of-lock ");
- if (resetsource & MCFRESET_RSR_LOC) puts("Lose-of-clock ");
- if (resetsource & MCFRESET_RSR_EXT) puts("external ");
- if (resetsource & MCFRESET_RSR_POR) puts("Power-on ");
- if (resetsource & MCFRESET_RSR_WDR) puts("Watchdog ");
- if (resetsource & MCFRESET_RSR_SOFT) puts("Software ");
- if (resetsource & MCFRESET_RSR_LVD) puts("Low-voltage ");
- puts("\n");
++ printf ("Reset:%s%s%s%s%s%s%s\n",
++ (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "",
++ (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "",
++ (resetsource & MCFRESET_RSR_EXT) ? " External" : "",
++ (resetsource & MCFRESET_RSR_POR) ? " Power On" : "",
++ (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "",
++ (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "",
++ (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : ""
++ );
return 0;
}
#endif
#undef ea
+#ifdef CONFIG_M5271
+ /* Clear multicast address hash table
+ */
+ fecp->fec_ghash_table_high = 0;
+ fecp->fec_ghash_table_low = 0;
+
+ /* Clear individual address hash table
+ */
+ fecp->fec_ihash_table_high = 0;
+ fecp->fec_ihash_table_low = 0;
+#else
/* Clear multicast address hash table
*/
+ #ifdef CONFIG_M5282
+ fecp->fec_ihash_table_high = 0;
+ fecp->fec_ihash_table_low = 0;
+ #else
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
#endif
/* Enable MII mode
*/
--#if 0 /* Full duplex mode */
++
++#if 0 /* Full duplex mode */
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
--#else /* Half duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- #ifdef CONFIG_M5271
- fecp->fec_r_cntrl |= (PKT_MAXBUF_SIZE << 16); /* set max frame length */
- #endif
++#else /* Half duplex mode */
+ fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
+ fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
fecp->fec_x_cntrl = 0;
#endif
/* Set MII speed */
void rs_serial_setbaudrate(int port,int baudrate)
{
-#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
+#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
volatile unsigned char *uartp;
- #ifndef CONFIG_M5271
- double clock, fraction;
++# ifndef CONFIG_M5271
+ double fraction;
- #endif
++# endif
+ double clock;
if (port == 0)
-- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
else
-- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
-- clock = DoubleClock(baudrate); /* Set baud above */
++ clock = DoubleClock(baudrate); /* Set baud above */
- uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
- uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
- fraction = ((clock - (int)clock) * 16.0) + 0.5;
++ uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
++ uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
- #ifndef CONFIG_M5271
- uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
- uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
- uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
++# ifndef CONFIG_M5271
+ fraction = ((clock - (int)clock) * 16.0) + 0.5;
- uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
++ uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
++# endif
#endif
- switch (port)
- {
- case 1:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
- break;
- case 2:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
- break;
- default:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
++
+ #if defined(CONFIG_M5282)
+ volatile unsigned char *uartp;
+ long clock;
+
- clock = (long) CFG_CLK / ((long) 32 * baudrate); /* Set baud above */
++ switch (port) {
++ case 1:
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
++ break;
++ case 2:
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
++ break;
++ default:
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ }
+
- uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
- uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */
++ clock = (long) CFG_CLK / ((long) 32 * baudrate); /* Set baud above */
+
++ uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
++ uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */
+
#endif
};
--void rs_serial_init(int port,int baudrate)
++void rs_serial_init (int port, int baudrate)
{
-- volatile unsigned char *uartp;
++ volatile unsigned char *uartp;
/*
-- * Reset UART, get it into known state...
++ * Reset UART, get it into known state...
*/
- if (port == 0)
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
- else
- switch (port)
- {
- case 1:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
- break;
- #if defined(CONFIG_M5282)
- case 2:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
- break;
- #endif
- default:
- uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
++ switch (port) {
++ case 1:
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
++ break;
++#if defined(CONFIG_M5282)
++ case 2:
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
++ break;
++#endif
++ default:
++ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ }
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
-- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
/*
* Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
- rs_serial_setbaudrate(port,baudrate);
+ /* Mask UART interrupts */
+ uartp[MCFUART_UIMR] = 0;
+ /* Set clock Select Register: Tx/Rx clock is timer */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- rs_serial_setbaudrate(port,baudrate);
+
++ rs_serial_setbaudrate (port, baudrate);
+
+ /* Enable Tx/Rx */
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
return;
}
void serial_puts (const char *s) {
-- while (*s) {
++ while (*s)
serial_putc(*s++);
-- }
}
int serial_getc(void) {
* These vectors are to catch any un-intended traps.
*/
_vectors:
- .long 0x00000000
-#ifndef CONFIG_M5282
-.long _START
-#else
+
- #ifndef CONFIG_R5200
- .long 0x00000000, _START
++.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
++#if defined(CONFIG_R5200)
++.long 0x400
++#elif defined(CONFIG_M5282)
+ .long _start - TEXT_BASE
+#else
- .long 0x00000000, 0x400 /* Flash offset is 0 until we setup CS0 */
++.long _START
#endif
++
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
movec %d0, %RAMBAR0
#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
- #if defined(CONFIG_M5282) || defined(CONFIG_M5271)
-#ifdef CONFIG_M5282
++#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
/* Initialize IPSBAR */
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
move.l %d0, 0x40000000
/* Initialize FLASHBAR: locate internal Flash and validate it */
move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
movec %d0, %RAMBAR0
- #endif
+ jmp _after_flashbar_copy.L /* Force jump to absolute address */
+ _flashbar_setup_end:
+ nop
+ _after_flashbar_copy:
+ #else
+ /* Setup code to initialize FLASHBAR, if start from external Memory */
+ move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
+ movec %d0, %RAMBAR0
+ #endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
- /* Initialize RAMBAR1: locate SRAM and validate it */
- move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
- movec %d0, %RAMBAR1
+ #endif
+ /* if we come from a pre-loader we have no exception table and
+ * therefore no VBR to set
+ */
+ #if !defined(CONFIG_MONITOR_IS_IN_RAM)
+ move.l #CFG_FLASH_BASE, %d0
+ movec %d0, %VBR
#endif
+#ifdef CONFIG_R5200
+ move.l #(_flash_setup-CFG_FLASH_BASE), %a0
+ move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1
+ move.l #(CFG_INIT_RAM_ADDR), %a2
+_copy_flash:
+ move.l (%a0)+, (%a2)+
+ cmp.l %a0, %a1
+ bgt.s _copy_flash
+ jmp CFG_INIT_RAM_ADDR
+_after_flash_copy:
+#endif
+
+#if 0
/* invalidate and disable cache */
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
projects / karo-tx-uboot.git / commitdiff