]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
kmp204x: handle dip-switch for factory settings
authorStefan Bigler <stefan.bigler@keymile.com>
Fri, 2 May 2014 08:49:27 +0000 (10:49 +0200)
committerYork Sun <yorksun@freescale.com>
Tue, 13 May 2014 15:26:54 +0000 (08:26 -0700)
Add readout of dip-switch to revert to factory settings.
If one or more dip-switch are set, launch bank 0 that contains the
bootloader to do the required action.

Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
board/keymile/kmp204x/kmp204x.c
board/keymile/kmp204x/kmp204x.h
board/keymile/kmp204x/qrio.c

index 5fceedd7c35bdf3022e19fb2d1efef206695f7e7..fba1bdd4381a7900fb8e08019fd5bb2f3c35dec6 100644 (file)
@@ -116,6 +116,9 @@ int board_early_init_r(void)
        /* enable the Unit LED (red) & Boot LED (on) */
        qrio_set_leds();
 
+       /* enable Application Buffer */
+       qrio_enable_app_buffer();
+
        return ret;
 }
 
@@ -171,6 +174,18 @@ int hush_init_var(void)
 #if defined(CONFIG_LAST_STAGE_INIT)
 int last_stage_init(void)
 {
+#if defined(CONFIG_KMCOGE4)
+       /* on KMCOGE4, the BFTIC4 is on the LBAPP2 */
+       struct bfticu_iomap *bftic4 =
+               (struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE;
+       u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+       if (dip_switch != 0) {
+               /* start bootloader */
+               puts("DIP:   Enabled\n");
+               setenv("actual_bank", "0");
+       }
+#endif
        set_km_env();
        return 0;
 }
index 34de27eafe4f4ee2f6aa8a37122111f0167979c5..720e22561311cdaeaa74db10f926a4e512ed7da5 100644 (file)
@@ -22,5 +22,6 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
 void qrio_prst(u8 bit, bool en, bool wden);
 void qrio_prstcfg(u8 bit, u8 mode);
 void qrio_set_leds(void);
+void qrio_enable_app_buffer(void);
 
 void pci_of_setup(void *blob, bd_t *bd);
index 86df2c7ca98a12beb0a82418c928c2841b75381c..08d5ca43dfd596c72cf216342945f1d243d442ae 100644 (file)
@@ -159,3 +159,17 @@ void qrio_set_leds(void)
        ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN);
        out_8(qrio_base + CTRLH_OFF, ctrlh);
 }
+
+#define CTRLL_OFF              0x03
+#define CTRLL_WRB_BUFENA       0x20
+
+void qrio_enable_app_buffer(void)
+{
+       u8 ctrll;
+       void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+       /* enable application buffer */
+       ctrll = in_8(qrio_base + CTRLL_OFF);
+       ctrll |= (CTRLL_WRB_BUFENA);
+       out_8(qrio_base + CTRLL_OFF, ctrll);
+}