ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
- @board/armltd/integratorap/split_by_variant.sh $@
+ @board/armltd/integrator/split_by_variant.sh ap $@
integratorcp_config \
cp_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
- @board/armltd/integratorcp/split_by_variant.sh $@
+ @board/armltd/integrator/split_by_variant.sh cp $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
+++ /dev/null
-/integratorap/u-boot.lds
-/integratorcp/u-boot.lds
SOBJS-y := lowlevel_init.o
-COBJS-y := integratorap.o
+COBJS-y := integrator.o
COBJS-$(CONFIG_PCI) += pci.o
COBJS-y += timer.o
*/
#include <common.h>
+#ifdef CONFIG_PCI
#include <netdev.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
int board_init (void)
{
/* arch number of Integrator Board */
+#ifdef CONFIG_ARCH_CINTEGRATOR
+ gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
+#else
gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
+#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
return 0;
}
+#ifdef CONFIG_PCI
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
+#endif
--- /dev/null
+#!/bin/sh
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/armltd/integrator
+
+config_file=${obj}include/config.h
+
+if [ "$1" = "ap" ]
+then
+# ---------------------------------------------------------
+# Set the platform defines
+# ---------------------------------------------------------
+echo -n "/* Integrator configuration implied " > ${config_file}
+echo " by Makefile target */" >> ${config_file}
+echo -n "#define CONFIG_INTEGRATOR" >> ${config_file}
+echo " /* Integrator board */" >> ${config_file}
+echo -n "#define CONFIG_ARCH_INTEGRATOR" >> ${config_file}
+echo " 1 /* Integrator/AP */" >> ${config_file}
+# ---------------------------------------------------------
+# Set the core module defines according to Core Module
+# ---------------------------------------------------------
+cpu="arm_intcm"
+variant="unknown core module"
+
+if [ "$2" = "" ]
+then
+ echo "$0:: No parameters - using arm_intcm"
+else
+ case "$2" in
+ ap7_config)
+ cpu="arm_intcm"
+ variant="unported core module CM7TDMI"
+ ;;
+
+ ap966)
+ cpu="arm_intcm"
+ variant="unported core module CM966E-S"
+ ;;
+
+ ap922_config)
+ cpu="arm_intcm"
+ variant="unported core module CM922T"
+ ;;
+
+ integratorap_config | \
+ ap_config)
+ cpu="arm_intcm"
+ variant="unspecified core module"
+ ;;
+
+ ap720t_config)
+ cpu="arm720t"
+ echo -n "#define CONFIG_CM720T" >> ${config_file}
+ echo " 1 /* CPU core is ARM720T */ " >> ${config_file}
+ variant="Core module CM720T"
+ ;;
+
+ ap922_XA10_config)
+ cpu="arm_intcm"
+ variant="unported core module CM922T_XA10"
+ echo -n "#define CONFIG_CM922T_XA10" >> ${config_file}
+ echo " 1 /* CPU core is ARM922T_XA10 */" >> ${config_file}
+ ;;
+
+ ap920t_config)
+ cpu="arm920t"
+ variant="Core module CM920T"
+ echo -n "#define CONFIG_CM920T" >> ${config_file}
+ echo " 1 /* CPU core is ARM920T */" >> ${config_file}
+ ;;
+
+ ap926ejs_config)
+ cpu="arm926ejs"
+ variant="Core module CM926EJ-S"
+ echo -n "#define CONFIG_CM926EJ_S" >> ${config_file}
+ echo " 1 /* CPU core is ARM926EJ-S */ " >> ${config_file}
+ ;;
+
+ ap946es_config)
+ cpu="arm946es"
+ variant="Core module CM946E-S"
+ echo -n "#define CONFIG_CM946E_S" >> ${config_file}
+ echo " 1 /* CPU core is ARM946E-S */ " >> ${config_file}
+ ;;
+
+ *)
+ echo "$0:: Unknown core module"
+ variant="unknown core module"
+ cpu="arm_intcm"
+ ;;
+
+ esac
+fi
+
+case "$cpu" in
+ arm_intcm)
+ echo "/* Core module undefined/not ported */" >> ${config_file}
+ echo "#define CONFIG_ARM_INTCM 1" >> ${config_file}
+ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> ${config_file}
+ echo -n " /* CM may not have " >> ${config_file}
+ echo "multiple SSRAM mapping */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> ${config_file}
+ echo -n " /* CM may not support SPD " >> ${config_file}
+ echo "query */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_REMAP " >> ${config_file}
+ echo -n " /* CM may not support " >> ${config_file}
+ echo "remapping */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_INIT " >> ${config_file}
+ echo -n " /* CM may not have " >> ${config_file}
+ echo "initialization reg */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_TCRAM " >> ${config_file}
+ echo " /* CM may not have TCRAM */" >> ${config_file}
+ echo -n " /* May not be processor " >> ${config_file}
+ echo "without cache support */" >> ${config_file}
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> ${config_file}
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> ${config_file}
+ ;;
+
+ arm720t)
+ echo -n " /* May not be processor " >> ${config_file}
+ echo "without cache support */" >> ${config_file}
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> ${config_file}
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> ${config_file}
+ ;;
+esac
+
+else
+
+# ---------------------------------------------------------
+# Set the platform defines
+# ---------------------------------------------------------
+echo -n "/* Integrator configuration implied " > ${config_file}
+echo " by Makefile target */" >> ${config_file}
+echo -n "#define CONFIG_INTEGRATOR" >> ${config_file}
+echo " /* Integrator board */" >> ${config_file}
+echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> ${config_file}
+echo " 1 /* Integrator/CP */" >> ${config_file}
+
+cpu="arm_intcm"
+variant="unknown core module"
+
+if [ "$2" = "" ]
+then
+ echo "$0:: No parameters - using arm_intcm"
+else
+ case "$2" in
+ ap966)
+ cpu="arm_intcm"
+ variant="unported core module CM966E-S"
+ ;;
+
+ ap922_config)
+ cpu="arm_intcm"
+ variant="unported core module CM922T"
+ ;;
+
+ integratorcp_config | \
+ cp_config)
+ cpu="arm_intcm"
+ variant="unspecified core module"
+ ;;
+
+ cp922_XA10_config)
+ cpu="arm_intcm"
+ variant="unported core module CM922T_XA10"
+ echo -n "#define CONFIG_CM922T_XA10" >> ${config_file}
+ echo " 1 /* CPU core is ARM922T_XA10 */" >> ${config_file}
+ ;;
+
+ cp920t_config)
+ cpu="arm920t"
+ variant="Core module CM920T"
+ echo -n "#define CONFIG_CM920T" >> ${config_file}
+ echo " 1 /* CPU core is ARM920T */" >> ${config_file}
+ ;;
+
+ cp926ejs_config)
+ cpu="arm926ejs"
+ variant="Core module CM926EJ-S"
+ echo -n "#define CONFIG_CM926EJ_S" >> ${config_file}
+ echo " 1 /* CPU core is ARM926EJ-S */ " >> ${config_file}
+ ;;
+
+
+ cp946es_config)
+ cpu="arm946es"
+ variant="Core module CM946E-S"
+ echo -n "#define CONFIG_CM946E_S" >> ${config_file}
+ echo " 1 /* CPU core is ARM946E-S */ " >> ${config_file}
+ ;;
+
+ cp1136_config)
+ cpu="arm1136"
+ variant="Core module CM1136EJF-S"
+ echo -n "#define CONFIG_CM1136EJF_S" >> ${config_file}
+ echo " 1 /* CPU core is ARM1136JF-S */ " >> ${config_file}
+ ;;
+
+ *)
+ echo "$0:: Unknown core module"
+ variant="unknown core module"
+ cpu="arm_intcm"
+ ;;
+
+ esac
+
+fi
+
+if [ "$cpu" = "arm_intcm" ]
+then
+ echo "/* Core module undefined/not ported */" >> ${config_file}
+ echo "#define CONFIG_ARM_INTCM 1" >> ${config_file}
+ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> ${config_file}
+ echo -n " /* CM may not have " >> ${config_file}
+ echo "multiple SSRAM mapping */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> ${config_file}
+ echo -n " /* CM may not support SPD " >> ${config_file}
+ echo "query */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_REMAP " >> ${config_file}
+ echo -n " /* CM may not support " >> ${config_file}
+ echo "remapping */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_INIT " >> ${config_file}
+ echo -n " /* CM may not have " >> ${config_file}
+ echo "initialization reg */" >> ${config_file}
+ echo -n "#undef CONFIG_CM_TCRAM " >> ${config_file}
+ echo " /* CM may not have TCRAM */" >> ${config_file}
+fi
+
+fi # ap
+
+# ---------------------------------------------------------
+# Complete the configuration
+# ---------------------------------------------------------
+$MKCONFIG -a integrator$1 arm $cpu integrator armltd;
+echo "Variant:: $variant with core $cpu"
#include <common.h>
#include <div64.h>
+#ifdef CONFIG_ARCH_CINTEGRATOR
+#define DIV_CLOCK_INIT 1
+#define TIMER_LOAD_VAL 0xFFFFFFFFL
+#else
+#define DIV_CLOCK_INIT 256
+#define TIMER_LOAD_VAL 0x0000FFFFL
+#endif
/* The Integrator/CP timer1 is clocked at 1MHz
* can be divided by 16 or 256
* and can be set up as a 32-bit timer
/* Keep total timer count to avoid losing decrements < div_timer */
static unsigned long long total_count = 0;
static unsigned long long lastdec; /* Timer reading at last call */
-static unsigned long long div_clock = 1; /* Divisor applied to timer clock */
+/* Divisor applied to timer clock */
+static unsigned long long div_clock = DIV_CLOCK_INIT;
static unsigned long long div_timer = 1; /* Divisor to convert timer reading
* change to U-Boot ticks
*/
/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-static ulong timestamp; /* U-Boot ticks since startup */
+static ulong timestamp; /* U-Boot ticks since startup */
-#define TIMER_LOAD_VAL ((ulong)0xFFFFFFFF)
#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
{
/* Load timer with initial value */
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
+#ifdef CONFIG_ARCH_CINTEGRATOR
/* Set timer to be
- * enabled 1
- * periodic 1
- * no interrupts 0
- * X 0
- * divider 1 00 == less rounding error
- * 32 bit 1
- * wrapping 0
+ * enabled 1
+ * periodic 1
+ * no interrupts 0
+ * X 0
+ * divider 1 00 == less rounding error
+ * 32 bit 1
+ * wrapping 0
*/
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
+#else
+ /* Set timer to be
+ * enabled 1
+ * free-running 0
+ * XX 00
+ * divider 256 10
+ * XX 00
+ */
+ *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
+#endif
+
/* init the timestamp */
total_count = 0ULL;
reset_timer_masked();
- div_timer = (unsigned long long)(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ);
- div_timer /= div_clock;
+ div_timer = CONFIG_SYS_HZ_CLOCK;
+ do_div(div_timer, CONFIG_SYS_HZ);
+ do_div(div_timer, div_clock);
return (0);
}
void set_timer (ulong ticks)
{
timestamp = ticks;
- total_count = (unsigned long long)ticks * div_timer;
+ total_count = ticks * div_timer;
}
/* delay usec useconds */
void reset_timer_masked (void)
{
/* capure current decrementer value */
- lastdec = (unsigned long long)READ_TIMER;
+ lastdec = READ_TIMER;
/* start "advancing" time stamp from 0 */
timestamp = 0L;
}
ulong get_timer_masked (void)
{
/* get current count */
- unsigned long long now = (unsigned long long)READ_TIMER;
+ unsigned long long now = READ_TIMER;
if(now > lastdec) {
/* Must have wrapped */
} else {
total_count += lastdec - now;
}
- lastdec = now;
+ lastdec = now;
/* Reuse "now" */
now = total_count;
*/
unsigned long long get_ticks(void)
{
- return (unsigned long long)get_timer(0);
+ return get_timer(0);
}
/*
*/
ulong get_tbclk (void)
{
- return (ulong)(((unsigned long long)CONFIG_SYS_HZ_CLOCK)/div_clock);
+ unsigned long long tmp = CONFIG_SYS_HZ_CLOCK;
+
+ do_div(tmp, div_clock);
+
+ return tmp;
}
+++ /dev/null
-#!/bin/sh
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-echo -n "/* Integrator configuration implied " > tmp.fil
-echo " by Makefile target */" >> tmp.fil
-echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
-echo " /* Integrator board */" >> tmp.fil
-echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil
-echo " 1 /* Integrator/AP */" >> tmp.fil
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$1" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$1" in
- ap7_config)
- cpu="arm_intcm"
- variant="unported core module CM7TDMI"
- ;;
-
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorap_config | \
- ap_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- ap720t_config)
- cpu="arm720t"
- echo -n "#define CONFIG_CM720T" >> tmp.fil
- echo " 1 /* CPU core is ARM720T */ " >> tmp.fil
- variant="Core module CM720T"
- ;;
-
- ap922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
- echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
- ;;
-
- ap920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo -n "#define CONFIG_CM920T" >> tmp.fil
- echo " 1 /* CPU core is ARM920T */" >> tmp.fil
- ;;
-
- ap926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo -n "#define CONFIG_CM926EJ_S" >> tmp.fil
- echo " 1 /* CPU core is ARM926EJ-S */ " >> tmp.fil
- ;;
-
- ap946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo -n "#define CONFIG_CM946E_S" >> tmp.fil
- echo " 1 /* CPU core is ARM946E-S */ " >> tmp.fil
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-fi
-
-case "$cpu" in
- arm_intcm)
- echo "/* Core module undefined/not ported */" >> tmp.fil
- echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
- echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "multiple SSRAM mapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
- echo -n " /* CM may not support SPD " >> tmp.fil
- echo "query */" >> tmp.fil
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
- echo -n " /* CM may not support " >> tmp.fil
- echo "remapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "initialization reg */" >> tmp.fil
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
- echo " /* CM may not have TCRAM */" >> tmp.fil
- echo -n " /* May not be processor " >> tmp.fil
- echo "without cache support */" >> tmp.fil
- echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
- echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
- ;;
-
- arm720t)
- echo -n " /* May not be processor " >> tmp.fil
- echo "without cache support */" >> tmp.fil
- echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
- echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
- ;;
-esac
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integratorap
-mv tmp.fil ${obj}include/config.h
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a integratorap arm $cpu integratorap armltd;
-echo "Variant:: $variant with core $cpu"
-
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/* The Integrator/AP timer1 is clocked at 24MHz
- * can be divided by 16 or 256
- * and is a 16-bit counter
- */
-/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
-static ulong timestamp; /* U-Boot ticks since startup */
-static ulong total_count = 0; /* Total timer count */
-static ulong lastdec; /* Timer reading at last call */
-static ulong div_clock = 256; /* Divisor applied to the timer clock */
-static ulong div_timer = 1; /* Divisor to convert timer reading
- * change to U-Boot ticks
- */
-/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-
-#define TIMER_LOAD_VAL 0x0000FFFFL
-#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
-
-/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
- * - unless otherwise stated
- */
-
-/* starts a counter
- * - the Integrator/AP timer issues an interrupt
- * each time it reaches zero
- */
-int timer_init (void)
-{
- /* Load timer with initial value */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
- /* Set timer to be
- * enabled 1
- * free-running 0
- * XX 00
- * divider 256 10
- * XX 00
- */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
- total_count = 0;
- /* init the timestamp and lastdec value */
- reset_timer_masked();
-
- div_timer = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
- div_timer /= div_clock;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base_ticks)
-{
- return get_timer_masked () - base_ticks;
-}
-
-void set_timer (ulong ticks)
-{
- timestamp = ticks;
- total_count = ticks * div_timer;
- reset_timer_masked();
-}
-
-/* delay x useconds */
-void udelay (unsigned long usec)
-{
- ulong tmo, tmp;
-
- /* Convert to U-Boot ticks */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000000L);
-
- tmp = get_timer_masked(); /* get current timestamp */
- tmo += tmp; /* wake up timestamp */
-
- while (get_timer_masked () < tmo) { /* loop till event */
- /*NOP*/;
- }
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER; /* capture current decrementer value */
- timestamp = 0; /* start "advancing" time stamp from 0 */
-}
-
-/* converts the timer reading to U-Boot ticks */
-/* the timestamp is the number of ticks since reset */
-/* This routine does not detect wraps unless called regularly
- ASSUMES a call at least every 16 seconds to detect every reload */
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER; /* current count */
-
- if (now > lastdec) {
- /* Must have wrapped */
- total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
- } else {
- total_count += lastdec - now;
- }
- lastdec = now;
- timestamp = total_count/div_timer;
-
- return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
- udelay(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * Return the timebase clock frequency
- * i.e. how often the timer decrements
- */
-ulong get_tbclk (void)
-{
- return CONFIG_SYS_HZ_CLOCK/div_clock;
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-SOBJS := lowlevel_init.o
-
-COBJS := integratorcp.o
-COBJS += timer.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# image should be loaded at 0x01000000
-#
-
-TEXT_BASE = 0x01000000
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void peripheral_power_enable (void);
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of Integrator Board */
- gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- gd->flags = 0;
-
-#ifdef CONFIG_CM_REMAP
-extern void cm_remap(void);
- cm_remap(); /* remaps writeable memory to 0x00000000 */
-#endif
-
- icache_enable ();
-
- return 0;
-}
-
-int misc_init_r (void)
-{
- setenv("verify", "n");
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-#ifdef CONFIG_CM_SPD_DETECT
- {
-extern void dram_query(void);
- unsigned long cm_reg_sdram;
- unsigned long sdram_shift;
-
- dram_query(); /* Assembler accesses to CM registers */
- /* Queries the SPD values */
-
- /* Obtain the SDRAM size from the CM SDRAM register */
-
- cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
- /* Register SDRAM size
- *
- * 0xXXXXXXbbb000bb 16 MB
- * 0xXXXXXXbbb001bb 32 MB
- * 0xXXXXXXbbb010bb 64 MB
- * 0xXXXXXXbbb011bb 128 MB
- * 0xXXXXXXbbb100bb 256 MB
- *
- */
- sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
- gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
-
- }
-#endif /* CM_SPD_DETECT */
-
- return 0;
-}
+++ /dev/null
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/* Reset using CM control register */
-.global reset_cpu
-reset_cpu:
- mov r0, #CM_BASE
- ldr r1,[r0,#OS_CTRL]
- orr r1,r1,#CMMASK_RESET
- str r1,[r0,#OS_CTRL]
-
-reset_failed:
- b reset_failed
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
- /* If U-Boot has been run after the ARM boot monitor
- * then all the necessary actions have been done
- * otherwise we are running from user flash mapped to 0x00000000
- * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
- * Changes to the (possibly soft) reset defaults of the processor
- * itself should be performed in cpu/arm<>/start.S
- * This function affects only the core module or board settings
- */
-
-#ifdef CONFIG_CM_INIT
- /* CM has an initialization register
- * - bits in it are wired into test-chip pins to force
- * reset defaults
- * - may need to change its contents for U-Boot
- */
-
- /* set the desired CM specific value */
- mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
-
-#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
- orr r2,r2,#CMMASK_INIT_102
-#else
-
-#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
- !defined (CONFIG_CM940T)
- /* CMxx6 code */
-
-#ifdef CONFIG_CM_MULTIPLE_SSRAM
- /* set simple mapping */
- and r2,r2,#CMMASK_MAP_SIMPLE
-#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
-
-#ifdef CONFIG_CM_TCRAM
- /* disable TCRAM */
- and r2,r2,#CMMASK_TCRAM_DISABLE
-#endif /* #ifdef CONFIG_CM_TCRAM */
-
-#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
- defined (CONFIG_CM1136JF_S)
-
- and r2,r2,#CMMASK_LE
-
-#endif /* cpu with little endian initialization */
-
- orr r2,r2,#CMMASK_CMxx6_COMMON
-
-#endif /* CMxx6 code */
-
-#endif /* ARM102xxE value */
-
- /* read CM_INIT */
- mov r0, #CM_BASE
- ldr r1, [r0, #OS_INIT]
- /* check against desired bit setting */
- and r3,r1,r2
- cmp r3,r2
- beq init_reg_OK
-
- /* lock for change */
- mov r3, #CMVAL_LOCK1
- and r3, r3, #CMVAL_LOCK2
- str r3, [r0, #OS_LOCK]
- /* set desired value */
- orr r1,r1,r2
- /* write & relock CM_INIT */
- str r1, [r0, #OS_INIT]
- mov r1, #CMVAL_UNLOCK
- str r1, [r0, #OS_LOCK]
-
- /* soft reset so new values used */
- b reset_cpu
-
-init_reg_OK:
-
-#endif /* CONFIG_CM_INIT */
-
- mov pc, lr
-
-#ifdef CONFIG_CM_SPD_DETECT
- /* Fast memory is available for the DRAM data
- * - ensure it has been transferred, then summarize the data
- * into a CM register
- */
-.globl dram_query
-dram_query:
- stmfd r13!,{r4-r6,lr}
- /* set up SDRAM info */
- /* - based on example code from the CM User Guide */
- mov r0, #CM_BASE
-
-readspdbit:
- ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
- and r1, r1, #0x20 /* mask SPD bit (5) */
- cmp r1, #0x20 /* test if set */
- bne readspdbit
-
-setupsdram:
- add r0, r0, #OS_SPD /* address the copy of the SDP data */
- ldrb r1, [r0, #3] /* number of row address lines */
- ldrb r2, [r0, #4] /* number of column address lines */
- ldrb r3, [r0, #5] /* number of banks */
- ldrb r4, [r0, #31] /* module bank density */
- mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */
- mov r5, r5, ASL#2 /* size in MB */
- mov r0, #CM_BASE /* reload for later code */
- cmp r5, #0x10 /* is it 16MB? */
- bne not16
- mov r6, #0x2 /* store size and CAS latency of 2 */
- b writesize
-
-not16:
- cmp r5, #0x20 /* is it 32MB? */
- bne not32
- mov r6, #0x6
- b writesize
-
-not32:
- cmp r5, #0x40 /* is it 64MB? */
- bne not64
- mov r6, #0xa
- b writesize
-
-not64:
- cmp r5, #0x80 /* is it 128MB? */
- bne not128
- mov r6, #0xe
- b writesize
-
-not128:
- /* if it is none of these sizes then it is either 256MB, or
- * there is no SDRAM fitted so default to 256MB
- */
- mov r6, #0x12
-
-writesize:
- mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
- orr r2, r1, r2, ASL#12 /* OR in column address lines */
- orr r3, r2, r3, ASL#16 /* OR in number of banks */
- orr r6, r6, r3 /* OR in size and CAS latency */
- str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
-
-#endif /* #ifdef CONFIG_CM_SPD_DETECT */
-
- ldmfd r13!,{r4-r6,pc} /* back to caller */
-
-#ifdef CONFIG_CM_REMAP
- /* CM remap bit is operational
- * - use it to map writeable memory at 0x00000000, in place of flash
- */
-.globl cm_remap
-cm_remap:
- stmfd r13!,{r4-r10,lr}
-
- mov r0, #CM_BASE
- ldr r1, [r0, #OS_CTRL]
- orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
- str r1, [r0, #OS_CTRL]
-
- /* Now 0x00000000 is writeable, replace the vectors */
- ldr r0, =_start /* r0 <- start of vectors */
- ldr r2, =_armboot_start /* r2 <- past vectors */
- sub r1,r1,r1 /* destination 0x00000000 */
-
-copy_vec:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- ble copy_vec
-
- ldmfd r13!,{r4-r10,pc} /* back to caller */
-
-#endif /* #ifdef CONFIG_CM_REMAP */
+++ /dev/null
-#!/bin/sh
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-echo -n "/* Integrator configuration implied " > tmp.fil
-echo " by Makefile target */" >> tmp.fil
-echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
-echo " /* Integrator board */" >> tmp.fil
-echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil
-echo " 1 /* Integrator/CP */" >> tmp.fil
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$1" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$1" in
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorcp_config | \
- cp_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- cp922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
- echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
- ;;
-
- cp920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo -n "#define CONFIG_CM920T" >> tmp.fil
- echo " 1 /* CPU core is ARM920T */" >> tmp.fil
- ;;
-
- cp926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo -n "#define CONFIG_CM926EJ_S" >> tmp.fil
- echo " 1 /* CPU core is ARM926EJ-S */ " >> tmp.fil
- ;;
-
-
- cp946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo -n "#define CONFIG_CM946E_S" >> tmp.fil
- echo " 1 /* CPU core is ARM946E-S */ " >> tmp.fil
- ;;
-
- cp1136_config)
- cpu="arm1136"
- variant="Core module CM1136EJF-S"
- echo -n "#define CONFIG_CM1136EJF_S" >> tmp.fil
- echo " 1 /* CPU core is ARM1136JF-S */ " >> tmp.fil
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
- echo "/* Core module undefined/not ported */" >> tmp.fil
- echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
- echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "multiple SSRAM mapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
- echo -n " /* CM may not support SPD " >> tmp.fil
- echo "query */" >> tmp.fil
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
- echo -n " /* CM may not support " >> tmp.fil
- echo "remapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "initialization reg */" >> tmp.fil
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
- echo " /* CM may not have TCRAM */" >> tmp.fil
-fi
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integratorcp
-mv tmp.fil ${obj}include/config.h
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a integratorcp arm $cpu integratorcp armltd;
-echo "Variant:: $variant with core $cpu"
-
projects / karo-tx-uboot.git / commitdiff