]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
net: asix: add write_hwaddr function
authorLucas Stach <dev@lynxeye.de>
Wed, 22 Aug 2012 11:04:59 +0000 (11:04 +0000)
committerJoe Hershberger <joe.hershberger@ni.com>
Wed, 26 Sep 2012 17:36:30 +0000 (12:36 -0500)
All ASIX chipsets aside from AX88172 are able to set the MAC
address on the hardware level. Add a function to expose this
ability.

To differentiate between chip types we now carry flags as driver
private data. Also while touching the asix_dongles array
constify this.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
drivers/usb/eth/asix.c

index 50cbbbd09a23b905bc687e2ba7635aee328888ba..bbfa2d1d843f5ea3f4dfacfc5aa3655f86fcc579 100644 (file)
@@ -23,6 +23,7 @@
 #include <usb.h>
 #include <linux/mii.h>
 #include "usb_ether.h"
+#include <malloc.h>
 
 
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
@@ -35,6 +36,7 @@
 #define AX_CMD_WRITE_RX_CTL            0x10
 #define AX_CMD_WRITE_IPG0              0x12
 #define AX_CMD_READ_NODE_ID            0x13
+#define AX_CMD_WRITE_NODE_ID   0x14
 #define AX_CMD_READ_PHY_ID             0x19
 #define AX_CMD_WRITE_MEDIUM_MODE       0x1b
 #define AX_CMD_WRITE_GPIOS             0x1f
 #define AX_RX_URB_SIZE 2048
 #define PHY_CONNECT_TIMEOUT 5000
 
+/* asix_flags defines */
+#define FLAG_NONE                      0
+#define FLAG_TYPE_AX88172      (1U << 0)
+#define FLAG_TYPE_AX88772      (1U << 1)
+
 /* local vars */
 static int curr_eth_dev; /* index for name of next device detected */
 
+/* driver private */
+struct asix_private {
+       int flags;
+};
+
 /*
  * Asix infrastructure commands
  */
@@ -284,6 +296,21 @@ static int asix_write_gpio(struct ueth_data *dev, u16 value, int sleep)
        return ret;
 }
 
+static int asix_write_hwaddr(struct eth_device *eth)
+{
+       struct ueth_data *dev = (struct ueth_data *)eth->priv;
+       int ret;
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
+
+       memcpy(buf, eth->enetaddr, ETH_ALEN);
+
+       ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, buf);
+       if (ret < 0)
+               debug("Failed to set MAC address: %02x\n", ret);
+
+       return ret;
+}
+
 /*
  * mii commands
  */
@@ -539,19 +566,22 @@ void asix_eth_before_probe(void)
 struct asix_dongle {
        unsigned short vendor;
        unsigned short product;
+       int flags;
 };
 
-static struct asix_dongle asix_dongles[] = {
-       { 0x05ac, 0x1402 },     /* Apple USB Ethernet Adapter */
-       { 0x07d1, 0x3c05 },     /* D-Link DUB-E100 H/W Ver B1 */
-       { 0x0b95, 0x772a },     /* Cables-to-Go USB Ethernet Adapter */
-       { 0x0b95, 0x7720 },     /* Trendnet TU2-ET100 V3.0R */
-       { 0x0b95, 0x1720 },     /* SMC */
-       { 0x0db0, 0xa877 },     /* MSI - ASIX 88772a */
-       { 0x13b1, 0x0018 },     /* Linksys 200M v2.1 */
-       { 0x1557, 0x7720 },     /* 0Q0 cable ethernet */
-       { 0x2001, 0x3c05 },     /* DLink DUB-E100 H/W Ver B1 Alternate */
-       { 0x0000, 0x0000 }      /* END - Do not remove */
+static const struct asix_dongle const asix_dongles[] = {
+       { 0x05ac, 0x1402, FLAG_TYPE_AX88772 },  /* Apple USB Ethernet Adapter */
+       { 0x07d1, 0x3c05, FLAG_TYPE_AX88772 },  /* D-Link DUB-E100 H/W Ver B1 */
+       /* Cables-to-Go USB Ethernet Adapter */
+       { 0x0b95, 0x772a, FLAG_TYPE_AX88772 },
+       { 0x0b95, 0x7720, FLAG_TYPE_AX88772 },  /* Trendnet TU2-ET100 V3.0R */
+       { 0x0b95, 0x1720, FLAG_TYPE_AX88172 },  /* SMC */
+       { 0x0db0, 0xa877, FLAG_TYPE_AX88772 },  /* MSI - ASIX 88772a */
+       { 0x13b1, 0x0018, FLAG_TYPE_AX88172 },  /* Linksys 200M v2.1 */
+       { 0x1557, 0x7720, FLAG_TYPE_AX88772 },  /* 0Q0 cable ethernet */
+       /* DLink DUB-E100 H/W Ver B1 Alternate */
+       { 0x2001, 0x3c05, FLAG_TYPE_AX88772 },
+       { 0x0000, 0x0000, FLAG_NONE }   /* END - Do not remove */
 };
 
 /* Probe to see if a new device is actually an asix device */
@@ -588,6 +618,13 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,
        ss->subclass = iface_desc->bInterfaceSubClass;
        ss->protocol = iface_desc->bInterfaceProtocol;
 
+       /* alloc driver private */
+       ss->dev_priv = calloc(1, sizeof(struct asix_private));
+       if (!ss->dev_priv)
+               return 0;
+
+       ((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags;
+
        /*
         * We are expecting a minimum of 3 endpoints - in, out (bulk), and
         * int. We will ignore any others.
@@ -629,6 +666,8 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,
 int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
                                struct eth_device *eth)
 {
+       struct asix_private *priv = (struct asix_private *)ss->dev_priv;
+
        if (!eth) {
                debug("%s: missing parameter.\n", __func__);
                return 0;
@@ -638,6 +677,8 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
        eth->send = asix_send;
        eth->recv = asix_recv;
        eth->halt = asix_halt;
+       if (!(priv->flags & FLAG_TYPE_AX88172))
+               eth->write_hwaddr = asix_write_hwaddr;
        eth->priv = ss;
 
        if (asix_basic_reset(ss))