#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/mpc512x.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
-extern int mpc5121_diu_init(void);
-extern void ide_set_reset(int idereset);
-
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
CLOCK_SCCR1_LPC_EN | \
CLOCK_SCCR2_DIU_EN | \
CLOCK_SCCR2_I2C_EN)
-#define CSAW_START(start) ((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
-
-long int fixed_sdram(void);
-
int board_early_init_f(void)
{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
/*
CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
);
out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- in_be32(&im->sysconf.lpcs2aw);
- __asm__ __volatile__ ("isync");
+ sync_law(&im->sysconf.lpcs2aw);
/*
* Initialize Local Window for the On Board SRAM access
CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
);
out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- in_be32(&im->sysconf.lpcs6aw);
- __asm__ __volatile__ ("isync");
+ sync_law(&im->sysconf.lpcs6aw);
/*
* Configure Flash Speed
return fixed_sdram();
}
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2(msize);
- u32 i;
-
- /* Initialize IO Control */
- out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
- /* Initialize DDR Local Window */
- out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
- out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- in_be32(&im->sysconf.ddrlaw.ar);
- __asm__ __volatile__ ("isync");
-
- /* Enable DDR */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
- /* Initialize DDR Priority Manager */
- out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
- out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
- out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
- out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
- out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
- out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
- out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
- out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
- out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
- out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
- out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
- out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
- out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
- out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
- out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
- out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
- out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
- out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
- out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
- out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
- out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
- out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
- out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
- /* Initialize MDDRC */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
- out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
- out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
- /* Initialize DDR */
- for (i = 0; i < 10; i++)
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- /* Start MDDRC */
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
-
- return msize;
-}
-
int misc_init_r(void)
{
u32 tmp;
},
};
-
int checkboard (void)
{
puts("Board: ARIA\n");
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/mpc512x.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
CLOCK_SCCR2_I2C_EN)
-#define CSAW_START(start) ((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
-
int eeprom_write_enable(unsigned dev_addr, int state)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
else
clrbits_be32(&im->gpio.gpdat, 0x00100000);
-return 0;
-}
-
-/*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync.
- */
-static inline void sync_law(volatile void *addr)
-{
- in_be32(addr);
- __asm__ __volatile__ ("isync");
+ return 0;
}
int board_early_init_f(void)
return 0;
}
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2(msize);
- u32 i;
-
- /* Initialize IO Control */
- out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
- /* Initialize DDR Local Window */
- out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
- out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
- sync_law(&im->sysconf.ddrlaw.ar);
-
- /* Enable DDR */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
- /* Initialize DDR Priority Manager */
- out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
- out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
- out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
- out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
- out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
- out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
- out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
- out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
- out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
- out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
- out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
- out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
- out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
- out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
- out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
- out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
- out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
- out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
- out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
- out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
- out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
- out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
- out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
- /* Initialize MDDRC */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
- out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
- out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
- /* Initialize DDR */
- for (i = 0; i < 10; i++)
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- /* Start MDDRC */
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
-
- return msize;
-}
-
phys_size_t initdram(int board_type)
{
return get_ram_size(0, fixed_sdram());
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/mpc512x.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
-extern int mpc5121_diu_init(void);
-extern void ide_set_reset(int idereset);
-
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
CLOCK_SCCR1_DDR_EN | \
CLOCK_SCCR2_MEM_EN | \
CLOCK_SCCR2_SPDIF_EN)
-#define CSAW_START(start) ((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
-
-long int fixed_sdram(void);
void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
out_8(csreg, v);
}
-int board_early_init_f (void)
+int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 lpcaw, spridr;
+ u32 spridr;
/*
* Initialize Local Window for the CPLD registers access (CS2 selects
CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
);
out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- lpcaw = in_be32(&im->sysconf.lpcs6aw);
- __asm__ __volatile__ ("isync");
+ sync_law(&im->sysconf.lpcs2aw);
/*
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
return 0;
}
-phys_size_t initdram (int board_type)
+phys_size_t initdram(int board_type)
{
u32 msize = 0;
- msize = fixed_sdram ();
-
- return msize;
-}
-
-/*
- * fixed sdram init -- the board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2 (msize);
- u32 i;
-
- /* Initialize IO Control */
- out_be32 (&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
- /* Initialize DDR Local Window */
- out_be32 (&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
- out_be32 (&im->sysconf.ddrlaw.ar, msize_log2 - 1);
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- in_be32(&im->sysconf.ddrlaw.ar);
- __asm__ __volatile__ ("isync");
-
- /* Enable DDR */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
- /* Initialize DDR Priority Manager */
- out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
- out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
- out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
- out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
- out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
- out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
- out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
- out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
- out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
- out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
- out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
- out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
- out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
- out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
- out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
- out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
- out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
- out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
- out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
- out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
- out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
- out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
- out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
- /* Initialize MDDRC */
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
- out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
- out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
- /* Initialize DDR */
- for (i = 0; i < 10; i++)
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
- out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
- /* Start MDDRC */
- out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
- out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
+ msize = fixed_sdram();
return msize;
}
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS-y := traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o
+COBJS-y := cpu.o
+COBJS-y += traps.o
+COBJS-y += cpu_init.o
+COBJS-y += fixed_sdram.o
+COBJS-y += i2c.o
+COBJS-y += interrupts.o
+COBJS-y += iopin.o
+COBJS-y += serial.o
+COBJS-y += speed.o
COBJS-${CONFIG_FSL_DIU_FB} += diu.o
COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o
COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o
--- /dev/null
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mpc512x.h>
+
+/*
+ * fixed sdram init:
+ * The board doesn't use memory modules that have serial presence
+ * detect or similar mechanism for discovery of the DRAM settings
+ */
+long int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+ u32 i;
+
+ /* Initialize IO Control */
+ out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
+
+ /* Initialize DDR Local Window */
+ out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
+ out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
+ sync_law(&im->sysconf.ddrlaw.ar);
+
+ /* Enable DDR */
+ out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
+
+ /* Initialize DDR Priority Manager */
+ out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
+ out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
+ out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
+ out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
+ out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
+ out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
+ out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
+ out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
+ out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
+ out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
+ out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
+ out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
+ out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
+ out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
+ out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
+ out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
+ out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
+ out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
+ out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
+ out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
+ out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
+ out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
+ out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
+
+ /* Initialize MDDRC */
+ out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
+ out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
+ out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
+ out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
+
+ /* Initialize DDR */
+ for (i = 0; i < 10; i++)
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+ out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+ /* Start MDDRC */
+ out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
+ out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
+
+ return msize;
+}
--- /dev/null
+/*
+ * include/asm-ppc/mpc512x.h
+ *
+ * Prototypes, etc. for the Freescale MPC512x embedded cpu chips
+ *
+ * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASMPPC_MPC512X_H
+#define __ASMPPC_MPC512X_H
+
+/*
+ * macros for manipulating CSx_START/STOP
+ */
+#define CSAW_START(start) ((start) & 0xFFFF0000)
+#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
+
+/*
+ * Inlines
+ */
+
+/*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync.
+ */
+static inline void sync_law(volatile void *addr)
+{
+ in_be32(addr);
+ __asm__ __volatile__ ("isync");
+}
+
+/*
+ * Prototypes
+ */
+extern long int fixed_sdram(void);
+extern int mpc5121_diu_init(void);
+extern void ide_set_reset(int idereset);
+
+#endif /* __ASMPPC_MPC512X_H */
projects / karo-tx-uboot.git / commitdiff