+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+#if CONFIG_DDR_CLK_FREQ == 100000000
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_800 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2_800, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4_800, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5_800, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+#elif CONFIG_DDR_CLK_FREQ == 133000000
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_1333 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2_1333, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3_1333, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0_1333, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1_1333, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2_1333, &ddr->timing_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1_1333, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2_1333, &ddr->sdram_mode_2);
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL_1333, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_1333, &ddr->sdram_clk_cntl);
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_1333, &ddr->ddr_wrlvl_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4_1333, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5_1333, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+#else
+ puts("Not a valid DDR Freq Found! Please Reset\n");
+#endif
+ asm volatile("sync;isync");
+ udelay(500);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* Initialize the DDR3 */
+ sdram_init();
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
projects / karo-tx-uboot.git / commitdiff