]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
omap: gpio: Adapt board files to use generic API
authorSanjeev Premi <premi@ti.com>
Thu, 8 Sep 2011 14:51:01 +0000 (10:51 -0400)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Tue, 13 Sep 2011 06:25:15 +0000 (08:25 +0200)
This patch contains updates the sources in the board files
to use the generic API.

Signed-off-by: Sanjeev Premi <premi@ti.com>
board/cm_t35/leds.c
board/comelit/dig297/dig297.c
board/isee/igep0020/igep0020.c
board/logicpd/zoom2/debug_board.c
board/logicpd/zoom2/led.c
board/logicpd/zoom2/zoom2.c
board/overo/overo.c
board/ti/beagle/beagle.c
board/ti/beagle/led.c
board/ti/evm/evm.c

index 71c5b0de5f7a35ca61b0353c206742296c32342b..48ad598d90673552fa492ce34234f1aed4d280ac 100644 (file)
  */
 #include <common.h>
 #include <status_led.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 static unsigned int leds[] = { GREEN_LED_GPIO };
 
 void __led_init(led_id_t mask, int state)
 {
-       if (omap_request_gpio(leds[mask]) != 0) {
+       if (gpio_request(leds[mask], "") != 0) {
                printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]);
                return;
        }
 
-       omap_set_gpio_direction(leds[mask], 0);
+       gpio_direction_output(leds[mask], 0);
 }
 
 void __led_set(led_id_t mask, int state)
 {
-       omap_set_gpio_dataout(leds[mask], state == STATUS_LED_ON);
+       gpio_set_value(leds[mask], state == STATUS_LED_ON);
 }
 
 void __led_toggle(led_id_t mask)
 {
-       omap_set_gpio_dataout(leds[mask], !omap_get_gpio_datain(leds[mask]));
+       gpio_set_value(leds[mask], !gpio_get_value(leds[mask]));
 }
index a7071cd5543361b3bf5921bbb46bea81376e0173..c81ce58b62eff78f0b1c48e118aa55ab35362502 100644 (file)
@@ -42,7 +42,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
 #include "dig297.h"
 
@@ -177,13 +177,13 @@ static void setup_net_chip(void)
               &ctrl_base->gpmc_nadv_ale);
 
        /* Make GPIO 12 as output pin and send a magic pulse through it */
-       if (!omap_request_gpio(NET_LAN9221_RESET_GPIO)) {
-               omap_set_gpio_direction(NET_LAN9221_RESET_GPIO, 0);
-               omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 1);
+       if (!gpio_request(NET_LAN9221_RESET_GPIO, "")) {
+               gpio_direction_output(NET_LAN9221_RESET_GPIO, 0);
+               gpio_set_value(NET_LAN9221_RESET_GPIO, 1);
                udelay(1);
-               omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 0);
+               gpio_set_value(NET_LAN9221_RESET_GPIO, 0);
                udelay(31000);  /* Should be >= 30ms according to datasheet */
-               omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 1);
+               gpio_set_value(NET_LAN9221_RESET_GPIO, 1);
        }
 }
 #endif /* CONFIG_CMD_NET */
index 36cc9248b6b7ec2e1783713b472f47d751eb0ca3..2279cc0e36efe5902db9b1b84325b645f65dd5f3 100644 (file)
@@ -24,7 +24,7 @@
 #include <netdev.h>
 #include <twl4030.h>
 #include <asm/io.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
@@ -81,13 +81,13 @@ static void setup_net_chip(void)
                &ctrl_base->gpmc_nadv_ale);
 
        /* Make GPIO 64 as output pin and send a magic pulse through it */
-       if (!omap_request_gpio(64)) {
-               omap_set_gpio_direction(64, 0);
-               omap_set_gpio_dataout(64, 1);
+       if (!gpio_request(64, "")) {
+               gpio_direction_output(64, 0);
+               gpio_set_value(64, 1);
                udelay(1);
-               omap_set_gpio_dataout(64, 0);
+               gpio_set_value(64, 0);
                udelay(1);
-               omap_set_gpio_dataout(64, 1);
+               gpio_set_value(64, 1);
        }
 }
 #endif
index a4ddf29294b20e99d1fd33b9dae83bbba67a5884..33aa6001bc6b9d33c1beeba0f75c1d92150229f8 100644 (file)
@@ -22,7 +22,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
 #include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 #define DEBUG_BOARD_CONNECTED          1
 #define DEBUG_BOARD_NOT_CONNECTED      0
@@ -33,14 +33,14 @@ static void zoom2_debug_board_detect (void)
 {
        int val = 0;
 
-       if (!omap_request_gpio(158)) {
+       if (!gpio_request(158, "")) {
                /*
                 * GPIO to query for debug board
                 * 158 db board query
                 */
-               omap_set_gpio_direction(158, 1);
-               val = omap_get_gpio_datain(158);
-               omap_free_gpio(158);
+               gpio_direction_input(158);
+               val = gpio_get_value(158);
+               gpio_free(158);
        }
 
        if (!val)
index 4e14c58f0b1b9f41ae1b093e46dc18b02b77a7a5..42553727e4a1102676674f9e27659098292d2bde 100644 (file)
@@ -22,7 +22,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
 
@@ -39,9 +39,9 @@ static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
 void red_LED_off (void)
 {
        /* red */
-       if (!omap_request_gpio(ZOOM2_LED_RED)) {
-               omap_set_gpio_direction(ZOOM2_LED_RED, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_RED, 0);
+       if (!gpio_request(ZOOM2_LED_RED, "")) {
+               gpio_direction_output(ZOOM2_LED_RED, 0);
+               gpio_set_value(ZOOM2_LED_RED, 0);
        }
        saved_state[STATUS_LED_RED] = STATUS_LED_OFF;
 }
@@ -49,15 +49,15 @@ void red_LED_off (void)
 void blue_LED_off (void)
 {
        /* blue */
-       if (!omap_request_gpio(ZOOM2_LED_BLUE)) {
-               omap_set_gpio_direction(ZOOM2_LED_BLUE, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_BLUE, 0);
+       if (!gpio_request(ZOOM2_LED_BLUE, "")) {
+               gpio_direction_output(ZOOM2_LED_BLUE, 0);
+               gpio_set_value(ZOOM2_LED_BLUE, 0);
        }
 
        /* blue 2 */
-       if (!omap_request_gpio(ZOOM2_LED_BLUE2)) {
-               omap_set_gpio_direction(ZOOM2_LED_BLUE2, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_BLUE2, 0);
+       if (!gpio_request(ZOOM2_LED_BLUE2, "")) {
+               gpio_direction_output(ZOOM2_LED_BLUE2, 0);
+               gpio_set_value(ZOOM2_LED_BLUE2, 0);
        }
        saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF;
 }
@@ -67,9 +67,9 @@ void red_LED_on (void)
        blue_LED_off ();
 
        /* red */
-       if (!omap_request_gpio(ZOOM2_LED_RED)) {
-               omap_set_gpio_direction(ZOOM2_LED_RED, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_RED, 1);
+       if (!gpio_request(ZOOM2_LED_RED, "")) {
+               gpio_direction_output(ZOOM2_LED_RED, 0);
+               gpio_set_value(ZOOM2_LED_RED, 1);
        }
        saved_state[STATUS_LED_RED] = STATUS_LED_ON;
 }
@@ -79,15 +79,15 @@ void blue_LED_on (void)
        red_LED_off ();
 
        /* blue */
-       if (!omap_request_gpio(ZOOM2_LED_BLUE)) {
-               omap_set_gpio_direction(ZOOM2_LED_BLUE, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_BLUE, 1);
+       if (!gpio_request(ZOOM2_LED_BLUE, "")) {
+               gpio_direction_output(ZOOM2_LED_BLUE, 0);
+               gpio_set_value(ZOOM2_LED_BLUE, 1);
        }
 
        /* blue 2 */
-       if (!omap_request_gpio(ZOOM2_LED_BLUE2)) {
-               omap_set_gpio_direction(ZOOM2_LED_BLUE2, 0);
-               omap_set_gpio_dataout(ZOOM2_LED_BLUE2, 1);
+       if (!gpio_request(ZOOM2_LED_BLUE2, "")) {
+               gpio_direction_output(ZOOM2_LED_BLUE2, 0);
+               gpio_set_value(ZOOM2_LED_BLUE2, 1);
        }
 
        saved_state[STATUS_LED_BLUE] = STATUS_LED_ON;
index 800113a976892df680c2a9dc6f0c882f23a77d52..21964c24055420680ea6a509af9431be0b91f8ce 100644 (file)
@@ -36,7 +36,7 @@
 #include <twl4030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
@@ -90,12 +90,12 @@ void zoom2_identify(void)
         * and they are not commonly used.  They are mentioned here
         * only for completeness.
         */
-       if (!omap_request_gpio(94)) {
+       if (!gpio_request(94, "")) {
                unsigned int val;
 
-               omap_set_gpio_direction(94, 1);
-               val = omap_get_gpio_datain(94);
-               omap_free_gpio(94);
+               gpio_direction_input(94);
+               val = gpio_get_value(94);
+               gpio_free(94);
 
                if (val)
                        revision = ZOOM2_REVISION_BETA;
index 4eafdb1df392542141ca8c5901558fdebc0d0218..4bbe1b87beae41d8b846949300ae6806f8a65da0 100644 (file)
@@ -36,7 +36,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
 #include "overo.h"
 
@@ -106,21 +106,21 @@ int get_board_revision(void)
 {
        int revision;
 
-       if (!omap_request_gpio(112) &&
-           !omap_request_gpio(113) &&
-           !omap_request_gpio(115)) {
+       if (!gpio_request(112, "") &&
+           !gpio_request(113, "") &&
+           !gpio_request(115, "")) {
 
-               omap_set_gpio_direction(112, 1);
-               omap_set_gpio_direction(113, 1);
-               omap_set_gpio_direction(115, 1);
+               gpio_direction_input(112);
+               gpio_direction_input(113);
+               gpio_direction_input(115);
 
-               revision = omap_get_gpio_datain(115) << 2 |
-                          omap_get_gpio_datain(113) << 1 |
-                          omap_get_gpio_datain(112);
+               revision = gpio_get_value(115) << 2 |
+                          gpio_get_value(113) << 1 |
+                          gpio_get_value(112);
 
-               omap_free_gpio(112);
-               omap_free_gpio(113);
-               omap_free_gpio(115);
+               gpio_free(112);
+               gpio_free(113);
+               gpio_free(115);
        } else {
                printf("Error: unable to acquire board revision GPIOs\n");
                revision = -1;
@@ -139,21 +139,21 @@ int get_sdio2_config(void)
 {
        int sdio_direct;
 
-       if (!omap_request_gpio(130) && !omap_request_gpio(139)) {
+       if (!gpio_request(130, "") && !gpio_request(139, "")) {
 
-               omap_set_gpio_direction(130, 0);
-               omap_set_gpio_direction(139, 1);
+               gpio_direction_output(130, 0);
+               gpio_direction_input(139);
 
                sdio_direct = 1;
-               omap_set_gpio_dataout(130, 0);
-               if (omap_get_gpio_datain(139) == 0) {
-                       omap_set_gpio_dataout(130, 1);
-                       if (omap_get_gpio_datain(139) == 1)
+               gpio_set_value(130, 0);
+               if (gpio_get_value(139) == 0) {
+                       gpio_set_value(130, 1);
+                       if (gpio_get_value(139) == 1)
                                sdio_direct = 0;
                }
 
-               omap_free_gpio(130);
-               omap_free_gpio(139);
+               gpio_free(130);
+               gpio_free(139);
        } else {
                printf("Error: unable to acquire sdio2 clk GPIOs\n");
                sdio_direct = -1;
@@ -322,13 +322,13 @@ static void setup_net_chip(void)
                &ctrl_base->gpmc_nadv_ale);
 
        /* Make GPIO 64 as output pin and send a magic pulse through it */
-       if (!omap_request_gpio(64)) {
-               omap_set_gpio_direction(64, 0);
-               omap_set_gpio_dataout(64, 1);
+       if (!gpio_request(64, "")) {
+               gpio_direction_output(64, 0);
+               gpio_set_value(64, 1);
                udelay(1);
-               omap_set_gpio_dataout(64, 0);
+               gpio_set_value(64, 0);
                udelay(1);
-               omap_set_gpio_dataout(64, 1);
+               gpio_set_value(64, 1);
        }
 }
 #endif
index e07f1b8f8260cc7ea96df6eb5e3c109e25a48a7d..8cdceaf56993832b40dffbdea2cbb7c12215b52a 100644 (file)
@@ -38,7 +38,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
 #ifdef CONFIG_USB_EHCI
 #include <usb.h>
@@ -116,21 +116,21 @@ int get_board_revision(void)
 {
        int revision;
 
-       if (!omap_request_gpio(171) &&
-           !omap_request_gpio(172) &&
-           !omap_request_gpio(173)) {
+       if (!gpio_request(171, "") &&
+           !gpio_request(172, "") &&
+           !gpio_request(173, "")) {
 
-               omap_set_gpio_direction(171, 1);
-               omap_set_gpio_direction(172, 1);
-               omap_set_gpio_direction(173, 1);
+               gpio_direction_input(171);
+               gpio_direction_input(172);
+               gpio_direction_input(173);
 
-               revision = omap_get_gpio_datain(173) << 2 |
-                          omap_get_gpio_datain(172) << 1 |
-                          omap_get_gpio_datain(171);
+               revision = gpio_get_value(173) << 2 |
+                          gpio_get_value(172) << 1 |
+                          gpio_get_value(171);
 
-               omap_free_gpio(171);
-               omap_free_gpio(172);
-               omap_free_gpio(173);
+               gpio_free(171);
+               gpio_free(172);
+               gpio_free(173);
        } else {
                printf("Error: unable to acquire board revision GPIOs\n");
                revision = -1;
@@ -387,7 +387,7 @@ int board_mmc_init(bd_t *bis)
 int ehci_hcd_stop(void)
 {
        pr_debug("Resetting OMAP3 EHCI\n");
-       omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
+       gpio_set_value(GPIO_PHY_RESET, 0);
        writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
        /* disable USB clocks */
        struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
@@ -415,9 +415,9 @@ int ehci_hcd_init(void)
        pr_debug("Initializing OMAP3 ECHI\n");
 
        /* Put the PHY in RESET */
-       omap_request_gpio(GPIO_PHY_RESET);
-       omap_set_gpio_direction(GPIO_PHY_RESET, 0);
-       omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
+       gpio_request(GPIO_PHY_RESET, "");
+       gpio_direction_output(GPIO_PHY_RESET, 0);
+       gpio_set_value(GPIO_PHY_RESET, 0);
 
        /* Hold the PHY in RESET for enough time till DIR is high */
        /* Refer: ISSUE1 */
@@ -469,7 +469,7 @@ int ehci_hcd_init(void)
         * PHY is settled and ready
         */
        udelay(10);
-       omap_set_gpio_dataout(GPIO_PHY_RESET, 1);
+       gpio_set_value(GPIO_PHY_RESET, 1);
 
        hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
        hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
@@ -508,10 +508,10 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                gpio = 4;
                break;
        }
-       omap_request_gpio(gpio);
-       omap_set_gpio_direction(gpio, 1);
+       gpio_request(gpio, "");
+       gpio_direction_input(gpio);
        printf("The user button is currently ");
-       if(omap_get_gpio_datain(gpio))
+       if (gpio_get_value(gpio))
        {
                button = 1;
                printf("PRESSED.\n");
@@ -522,7 +522,7 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                printf("NOT pressed.\n");
        }
 
-       omap_free_gpio(gpio);
+       gpio_free(gpio);
 
        return !button;
 }
index f08c08ad884f3881ea3ebb2ca38ff16e9539df68..1779242a01c7bd6623a898ce012e75fc4987e64e 100644 (file)
@@ -22,7 +22,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 /* GPIO pins for the LEDs */
 #define BEAGLE_LED_USR0        150
@@ -57,10 +57,10 @@ void __led_toggle (led_id_t mask)
                toggle_gpio = BEAGLE_LED_USR1;
 #endif
        if (toggle_gpio) {
-               if (!omap_request_gpio(toggle_gpio)) {
-                       omap_set_gpio_direction(toggle_gpio, 0);
-                       state = omap_get_gpio_dataout(toggle_gpio);
-                       omap_set_gpio_dataout(toggle_gpio, !state);
+               if (!gpio_request(toggle_gpio, "")) {
+                       gpio_direction_output(toggle_gpio, 0);
+                       state = gpio_get_value(toggle_gpio);
+                       gpio_set_value(toggle_gpio, !state);
                }
        }
 }
@@ -69,17 +69,17 @@ void __led_set (led_id_t mask, int state)
 {
 #ifdef STATUS_LED_BIT
        if (STATUS_LED_BIT & mask) {
-               if (!omap_request_gpio(BEAGLE_LED_USR0)) {
-                       omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
-                       omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
+               if (!gpio_request(BEAGLE_LED_USR0, "")) {
+                       gpio_direction_output(BEAGLE_LED_USR0, 0);
+                       gpio_set_value(BEAGLE_LED_USR0, state);
                }
        }
 #endif
 #ifdef STATUS_LED_BIT1
        if (STATUS_LED_BIT1 & mask) {
-               if (!omap_request_gpio(BEAGLE_LED_USR1)) {
-                       omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
-                       omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
+               if (!gpio_request(BEAGLE_LED_USR1, "")) {
+                       gpio_direction_output(BEAGLE_LED_USR1, 0);
+                       gpio_set_value(BEAGLE_LED_USR1, state);
                }
        }
 #endif
index e8360df96062ee1f43cd53fc20cef8a6867be8fa..b17c0fbadfc21c4deb4f13cd3675e0ba026aad10 100644 (file)
@@ -34,7 +34,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
 #include "evm.h"
@@ -196,21 +196,21 @@ static void reset_net_chip(void)
                rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
        }
 
-       ret = omap_request_gpio(rst_gpio);
+       ret = gpio_request(rst_gpio, "");
        if (ret < 0) {
                printf("Unable to get GPIO %d\n", rst_gpio);
                return ;
        }
 
        /* Configure as output */
-       omap_set_gpio_direction(rst_gpio, 0);
+       gpio_direction_output(rst_gpio, 0);
 
        /* Send a pulse on the GPIO pin */
-       omap_set_gpio_dataout(rst_gpio, 1);
+       gpio_set_value(rst_gpio, 1);
        udelay(1);
-       omap_set_gpio_dataout(rst_gpio, 0);
+       gpio_set_value(rst_gpio, 0);
        udelay(1);
-       omap_set_gpio_dataout(rst_gpio, 1);
+       gpio_set_value(rst_gpio, 1);
 }
 
 int board_eth_init(bd_t *bis)