#ifndef __TI_KEYSTONE_SERDES_H__
#define __TI_KEYSTONE_SERDES_H__
-void ks2_serdes_sgmii_156p25mhz_setup(void);
+/* SERDES Reference clock */
+enum ks2_serdes_clock {
+ SERDES_CLOCK_100M, /* 100 MHz */
+ SERDES_CLOCK_122P88M, /* 122.88 MHz */
+ SERDES_CLOCK_125M, /* 125 MHz */
+ SERDES_CLOCK_156P25M, /* 156.25 MHz */
+ SERDES_CLOCK_312P5M, /* 312.5 MHz */
+};
+
+/* SERDES Lane Baud Rate */
+enum ks2_serdes_rate {
+ SERDES_RATE_4P9152G, /* 4.9152 GBaud */
+ SERDES_RATE_5G, /* 5 GBaud */
+ SERDES_RATE_6P144G, /* 6.144 GBaud */
+ SERDES_RATE_6P25G, /* 6.25 GBaud */
+ SERDES_RATE_10p3125g, /* 10.3215 GBaud */
+ SERDES_RATE_12p5g, /* 12.5 GBaud */
+};
+
+/* SERDES Lane Rate Mode */
+enum ks2_serdes_rate_mode {
+ SERDES_FULL_RATE,
+ SERDES_HALF_RATE,
+ SERDES_QUARTER_RATE,
+};
+
+/* SERDES PHY TYPE */
+enum ks2_serdes_interface {
+ SERDES_PHY_SGMII,
+ SERDES_PHY_PCSR, /* XGE SERDES */
+};
+
+struct ks2_serdes {
+ enum ks2_serdes_clock clk;
+ enum ks2_serdes_rate rate;
+ enum ks2_serdes_rate_mode rate_mode;
+ enum ks2_serdes_interface intf;
+ u32 loopback;
+};
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes);
#endif /* __TI_KEYSTONE_SERDES_H__ */
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <errno.h>
#include <common.h>
+#include <asm/ti-common/keystone_serdes.h>
+#define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x)))
#define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x)))
+#define SERDES_COMLANE_REGS 0x0a00
+#define SERDES_WIZ_REGS 0x1fc0
+
+#define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000)
+#define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010)
+#define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000)
+#define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000)
+#define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028)
+#define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x)))
+#define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034)
+
+#define SERDES_RESET BIT(28)
+#define SERDES_LANE_RESET BIT(29)
+#define SERDES_LANE_LOOPBACK BIT(30)
+#define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10))
struct serdes_cfg {
u32 ofs;
u32 mask;
};
+/* SERDES PHY lane enable configuration value, indexed by PHY interface */
+static u32 serdes_cfg_lane_enable[] = {
+ 0xf000f0c0, /* SGMII */
+ 0xf0e9f038, /* PCSR */
+};
+
+/* SERDES PHY PLL enable configuration value, indexed by PHY interface */
+static u32 serdes_cfg_pll_enable[] = {
+ 0xe0000000, /* SGMII */
+ 0xee000000, /* PCSR */
+};
+
static struct serdes_cfg cfg_cmu_156p25m_5g[] = {
{0x0000, 0x00800000, 0xffff0000},
{0x0014, 0x00008282, 0x0000ffff},
return 0;
}
-void ks2_serdes_sgmii_156p25mhz_setup(void)
+static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes)
+{
+ /* Bring SerDes out of Reset */
+ ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET);
+ if (serdes->intf == SERDES_PHY_PCSR)
+ ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET);
+
+ /* Enable CMU and COMLANE */
+ ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff);
+ if (serdes->intf == SERDES_PHY_PCSR)
+ ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff);
+
+ ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff);
+}
+
+static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes)
+{
+ writel(serdes_cfg_pll_enable[serdes->intf],
+ base + SERDES_PLL_CTL_REG);
+}
+
+static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane)
{
- unsigned int cnt;
-
- ks2_serdes_init_156p25m_5g(CONFIG_KS2_SERDES_SGMII_BASE,
- CONFIG_KS2_SERDES_LANES_PER_SGMII);
-
- /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
- clrbits_le32(0x0232a010, 1 << 28);
-
- /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
- clrbits_le32(0x0232a228, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe0);
- clrbits_le32(0x0232a428, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe4);
- clrbits_le32(0x0232a628, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe8);
- clrbits_le32(0x0232a828, 1 << 29);
- writel(0xF800F8C0, 0x0232bfec);
-
- /*Enable pll via the pll_ctrl 0x0014*/
- writel(0xe0000000, 0x0232bff4)
- ;
-
- /*Waiting for SGMII Serdes PLL lock.*/
- for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
- ;
- for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
- ;
- for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
- ;
- for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
- ;
-
- udelay(45000);
+ if (reset)
+ ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+ 0x1, SERDES_LANE_RESET);
+ else
+ ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+ 0x0, SERDES_LANE_RESET);
+}
+
+static void ks2_serdes_lane_enable(u32 base,
+ struct ks2_serdes *serdes, u32 lane)
+{
+ /* Bring lane out of reset */
+ ks2_serdes_lane_reset(base, 0, lane);
+
+ writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf,
+ serdes->rate_mode),
+ base + SERDES_LANE_CTL_STATUS_REG(lane));
+
+ /* Set NES bit if Loopback Enabled */
+ if (serdes->loopback)
+ ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane),
+ 0x1, SERDES_LANE_LOOPBACK);
+}
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes)
+{
+ int i;
+ int ret = 0;
+
+ /* The driver currently supports 5GBaud rate with ref clock 156.25MHz */
+ if (serdes->clk == SERDES_CLOCK_156P25M)
+ if (serdes->rate == SERDES_RATE_5G)
+ ret = ks2_serdes_init_156p25m_5g(base, num_lanes);
+ else
+ return -EINVAL;
+ else
+ return -EINVAL;
+
+ ks2_serdes_cmu_comlane_enable(base, serdes);
+ for (i = 0; i < num_lanes; i++)
+ ks2_serdes_lane_enable(base, serdes, i);
+
+ ks2_serdes_pll_enable(base, serdes);
+
+ return ret;
}
projects / karo-tx-uboot.git / commitdiff