*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <spi.h>
#define SPI_OPCODE_WREN 0x06
#define SPI_OPCODE_FAST_READ 0x0b
-struct ich_ctlr {
+struct ich_spi_platdata {
pci_dev_t dev; /* PCI device number */
int ich_version; /* Controller version, 7 or 9 */
bool use_sbase; /* Use SBASE instead of RCB */
+};
+
+struct ich_spi_priv {
int ichspi_lock;
int locked;
- uint8_t *opmenu;
+ int opmenu;
int menubytes;
void *base; /* Base of register set */
- uint16_t *preop;
- uint16_t *optype;
- uint32_t *addr;
- uint8_t *data;
+ int preop;
+ int optype;
+ int addr;
+ int data;
unsigned databytes;
- uint8_t *status;
- uint16_t *control;
- uint32_t *bbar;
+ int status;
+ int control;
+ int bbar;
uint32_t *pr; /* only for ich9 */
- uint8_t *speed; /* pointer to speed control */
+ int speed; /* pointer to speed control */
ulong max_speed; /* Maximum bus speed in MHz */
+ ulong cur_speed; /* Current bus speed */
+ struct spi_trans trans; /* current transaction in progress */
};
-struct ich_ctlr ctlr;
-
-static inline struct ich_spi_slave *to_ich_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct ich_spi_slave, slave);
-}
-
-static unsigned int ich_reg(const void *addr)
-{
- return (unsigned)(addr - ctlr.base) & 0xffff;
-}
-
-static u8 ich_readb(const void *addr)
+static u8 ich_readb(struct ich_spi_priv *priv, int reg)
{
- u8 value = readb(addr);
+ u8 value = readb(priv->base + reg);
- debug("read %2.2x from %4.4x\n", value, ich_reg(addr));
+ debug("read %2.2x from %4.4x\n", value, reg);
return value;
}
-static u16 ich_readw(const void *addr)
+static u16 ich_readw(struct ich_spi_priv *priv, int reg)
{
- u16 value = readw(addr);
+ u16 value = readw(priv->base + reg);
- debug("read %4.4x from %4.4x\n", value, ich_reg(addr));
+ debug("read %4.4x from %4.4x\n", value, reg);
return value;
}
-static u32 ich_readl(const void *addr)
+static u32 ich_readl(struct ich_spi_priv *priv, int reg)
{
- u32 value = readl(addr);
+ u32 value = readl(priv->base + reg);
- debug("read %8.8x from %4.4x\n", value, ich_reg(addr));
+ debug("read %8.8x from %4.4x\n", value, reg);
return value;
}
-static void ich_writeb(u8 value, void *addr)
+static void ich_writeb(struct ich_spi_priv *priv, u8 value, int reg)
{
- writeb(value, addr);
- debug("wrote %2.2x to %4.4x\n", value, ich_reg(addr));
+ writeb(value, priv->base + reg);
+ debug("wrote %2.2x to %4.4x\n", value, reg);
}
-static void ich_writew(u16 value, void *addr)
+static void ich_writew(struct ich_spi_priv *priv, u16 value, int reg)
{
- writew(value, addr);
- debug("wrote %4.4x to %4.4x\n", value, ich_reg(addr));
+ writew(value, priv->base + reg);
+ debug("wrote %4.4x to %4.4x\n", value, reg);
}
-static void ich_writel(u32 value, void *addr)
+static void ich_writel(struct ich_spi_priv *priv, u32 value, int reg)
{
- writel(value, addr);
- debug("wrote %8.8x to %4.4x\n", value, ich_reg(addr));
+ writel(value, priv->base + reg);
+ debug("wrote %8.8x to %4.4x\n", value, reg);
}
-static void write_reg(const void *value, void *dest, uint32_t size)
+static void write_reg(struct ich_spi_priv *priv, const void *value,
+ int dest_reg, uint32_t size)
{
- memcpy_toio(dest, value, size);
+ memcpy_toio(priv->base + dest_reg, value, size);
}
-static void read_reg(const void *src, void *value, uint32_t size)
+static void read_reg(struct ich_spi_priv *priv, int src_reg, void *value,
+ uint32_t size)
{
- memcpy_fromio(value, src, size);
+ memcpy_fromio(value, priv->base + src_reg, size);
}
-static void ich_set_bbar(struct ich_ctlr *ctlr, uint32_t minaddr)
+static void ich_set_bbar(struct ich_spi_priv *ctlr, uint32_t minaddr)
{
const uint32_t bbar_mask = 0x00ffff00;
uint32_t ichspi_bbar;
minaddr &= bbar_mask;
- ichspi_bbar = ich_readl(ctlr->bbar) & ~bbar_mask;
+ ichspi_bbar = ich_readl(ctlr, ctlr->bbar) & ~bbar_mask;
ichspi_bbar |= minaddr;
- ich_writel(ichspi_bbar, ctlr->bbar);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- puts("spi_cs_is_valid used but not implemented\n");
- return 0;
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ich_spi_slave *ich;
-
- ich = spi_alloc_slave(struct ich_spi_slave, bus, cs);
- if (!ich) {
- puts("ICH SPI: Out of memory\n");
- return NULL;
- }
-
- /*
- * Yes this controller can only write a small number of bytes at
- * once! The limit is typically 64 bytes.
- */
- ich->slave.max_write_size = ctlr.databytes;
- ich->speed = max_hz;
-
- /*
- * ICH 7 SPI controller only supports array read command
- * and byte program command for SST flash
- */
- if (ctlr.ich_version == 7 || ctlr.use_sbase) {
- ich->slave.op_mode_rx = SPI_OPM_RX_AS;
- ich->slave.op_mode_tx = SPI_OPM_TX_BP;
- }
-
- return &ich->slave;
-}
-
-struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
- int spi_node)
-{
- /* We only support a single SPI at present */
- return spi_setup_slave(0, 0, 20000000, 0);
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ich_spi_slave *ich = to_ich_spi(slave);
-
- free(ich);
+ ich_writel(ctlr, ichspi_bbar, ctlr->bbar);
}
/*
return speed == 1;
}
-static int ich_find_spi_controller(struct ich_ctlr *ich)
+static int ich_find_spi_controller(struct ich_spi_platdata *ich)
{
int last_bus = pci_last_busno();
int bus;
return -ENODEV;
}
-static int ich_init_controller(struct ich_ctlr *ctlr)
+static int ich_init_controller(struct ich_spi_platdata *plat,
+ struct ich_spi_priv *ctlr)
{
uint8_t *rcrb; /* Root Complex Register Block */
uint32_t rcba; /* Root Complex Base Address */
uint32_t sbase_addr;
uint8_t *sbase;
- pci_read_config_dword(ctlr->dev, 0xf0, &rcba);
+ pci_read_config_dword(plat->dev, 0xf0, &rcba);
/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
rcrb = (uint8_t *)(rcba & 0xffffc000);
/* SBASE is similar */
- pci_read_config_dword(ctlr->dev, 0x54, &sbase_addr);
+ pci_read_config_dword(plat->dev, 0x54, &sbase_addr);
sbase = (uint8_t *)(sbase_addr & 0xfffffe00);
- if (ctlr->ich_version == 7) {
+ if (plat->ich_version == 7) {
struct ich7_spi_regs *ich7_spi;
ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020);
- ctlr->ichspi_lock = ich_readw(&ich7_spi->spis) & SPIS_LOCK;
- ctlr->opmenu = ich7_spi->opmenu;
+ ctlr->ichspi_lock = readw(&ich7_spi->spis) & SPIS_LOCK;
+ ctlr->opmenu = offsetof(struct ich7_spi_regs, opmenu);
ctlr->menubytes = sizeof(ich7_spi->opmenu);
- ctlr->optype = &ich7_spi->optype;
- ctlr->addr = &ich7_spi->spia;
- ctlr->data = (uint8_t *)ich7_spi->spid;
+ ctlr->optype = offsetof(struct ich7_spi_regs, optype);
+ ctlr->addr = offsetof(struct ich7_spi_regs, spia);
+ ctlr->data = offsetof(struct ich7_spi_regs, spid);
ctlr->databytes = sizeof(ich7_spi->spid);
- ctlr->status = (uint8_t *)&ich7_spi->spis;
- ctlr->control = &ich7_spi->spic;
- ctlr->bbar = &ich7_spi->bbar;
- ctlr->preop = &ich7_spi->preop;
+ ctlr->status = offsetof(struct ich7_spi_regs, spis);
+ ctlr->control = offsetof(struct ich7_spi_regs, spic);
+ ctlr->bbar = offsetof(struct ich7_spi_regs, bbar);
+ ctlr->preop = offsetof(struct ich7_spi_regs, preop);
ctlr->base = ich7_spi;
- } else if (ctlr->ich_version == 9) {
+ } else if (plat->ich_version == 9) {
struct ich9_spi_regs *ich9_spi;
- if (ctlr->use_sbase)
+ if (plat->use_sbase)
ich9_spi = (struct ich9_spi_regs *)sbase;
else
ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800);
- ctlr->ichspi_lock = ich_readw(&ich9_spi->hsfs) & HSFS_FLOCKDN;
- ctlr->opmenu = ich9_spi->opmenu;
+ ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN;
+ ctlr->opmenu = offsetof(struct ich9_spi_regs, opmenu);
ctlr->menubytes = sizeof(ich9_spi->opmenu);
- ctlr->optype = &ich9_spi->optype;
- ctlr->addr = &ich9_spi->faddr;
- ctlr->data = (uint8_t *)ich9_spi->fdata;
+ ctlr->optype = offsetof(struct ich9_spi_regs, optype);
+ ctlr->addr = offsetof(struct ich9_spi_regs, faddr);
+ ctlr->data = offsetof(struct ich9_spi_regs, fdata);
ctlr->databytes = sizeof(ich9_spi->fdata);
- ctlr->status = &ich9_spi->ssfs;
- ctlr->control = (uint16_t *)ich9_spi->ssfc;
- ctlr->speed = ich9_spi->ssfc + 2;
- ctlr->bbar = &ich9_spi->bbar;
- ctlr->preop = &ich9_spi->preop;
+ ctlr->status = offsetof(struct ich9_spi_regs, ssfs);
+ ctlr->control = offsetof(struct ich9_spi_regs, ssfc);
+ ctlr->speed = ctlr->control + 2;
+ ctlr->bbar = offsetof(struct ich9_spi_regs, bbar);
+ ctlr->preop = offsetof(struct ich9_spi_regs, preop);
ctlr->pr = &ich9_spi->pr[0];
ctlr->base = ich9_spi;
} else {
- debug("ICH SPI: Unrecognized ICH version %d.\n",
- ctlr->ich_version);
- return -1;
+ debug("ICH SPI: Unrecognised ICH version %d\n",
+ plat->ich_version);
+ return -EINVAL;
}
/* Work out the maximum speed we can support */
ctlr->max_speed = 20000000;
- if (ctlr->ich_version == 9 && ich9_can_do_33mhz(ctlr->dev))
+ if (plat->ich_version == 9 && ich9_can_do_33mhz(plat->dev))
ctlr->max_speed = 33000000;
debug("ICH SPI: Version %d detected at %p, speed %ld\n",
- ctlr->ich_version, ctlr->base, ctlr->max_speed);
+ plat->ich_version, ctlr->base, ctlr->max_speed);
ich_set_bbar(ctlr, 0);
return 0;
}
-void spi_init(void)
-{
- uint8_t bios_cntl;
-
- if (ich_find_spi_controller(&ctlr)) {
- printf("ICH SPI: Cannot find device\n");
- return;
- }
-
- if (ich_init_controller(&ctlr)) {
- printf("ICH SPI: Cannot setup controller\n");
- return;
- }
-
- /*
- * Disable the BIOS write protect so write commands are allowed. On
- * v9, deassert SMM BIOS Write Protect Disable.
- */
- if (ctlr.use_sbase) {
- struct ich9_spi_regs *ich9_spi;
-
- ich9_spi = (struct ich9_spi_regs *)ctlr.base;
- bios_cntl = ich_readb(&ich9_spi->bcr);
- bios_cntl &= ~(1 << 5); /* clear Enable InSMM_STS (EISS) */
- bios_cntl |= 1; /* Write Protect Disable (WPD) */
- ich_writeb(bios_cntl, &ich9_spi->bcr);
- } else {
- pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl);
- if (ctlr.ich_version == 9)
- bios_cntl &= ~(1 << 5);
- pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1);
- }
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
-}
-
static inline void spi_use_out(struct spi_trans *trans, unsigned bytes)
{
trans->out += bytes;
}
}
-static int spi_setup_opcode(struct spi_trans *trans)
+static int spi_setup_opcode(struct ich_spi_priv *ctlr, struct spi_trans *trans)
{
uint16_t optypes;
- uint8_t opmenu[ctlr.menubytes];
+ uint8_t opmenu[ctlr->menubytes];
trans->opcode = trans->out[0];
spi_use_out(trans, 1);
- if (!ctlr.ichspi_lock) {
+ if (!ctlr->ichspi_lock) {
/* The lock is off, so just use index 0. */
- ich_writeb(trans->opcode, ctlr.opmenu);
- optypes = ich_readw(ctlr.optype);
+ ich_writeb(ctlr, trans->opcode, ctlr->opmenu);
+ optypes = ich_readw(ctlr, ctlr->optype);
optypes = (optypes & 0xfffc) | (trans->type & 0x3);
- ich_writew(optypes, ctlr.optype);
+ ich_writew(ctlr, optypes, ctlr->optype);
return 0;
} else {
/* The lock is on. See if what we need is on the menu. */
if (trans->opcode == SPI_OPCODE_WREN)
return 0;
- read_reg(ctlr.opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < ctlr.menubytes;
+ read_reg(ctlr, ctlr->opmenu, opmenu, sizeof(opmenu));
+ for (opcode_index = 0; opcode_index < ctlr->menubytes;
opcode_index++) {
if (opmenu[opcode_index] == trans->opcode)
break;
}
- if (opcode_index == ctlr.menubytes) {
+ if (opcode_index == ctlr->menubytes) {
printf("ICH SPI: Opcode %x not found\n",
trans->opcode);
- return -1;
+ return -EINVAL;
}
- optypes = ich_readw(ctlr.optype);
+ optypes = ich_readw(ctlr, ctlr->optype);
optype = (optypes >> (opcode_index * 2)) & 0x3;
if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
if (optype != trans->type) {
printf("ICH SPI: Transaction doesn't fit type %d\n",
optype);
- return -1;
+ return -ENOSPC;
}
return opcode_index;
}
return 1;
default:
printf("Unrecognized SPI transaction type %#x\n", trans->type);
- return -1;
+ return -EPROTO;
}
}
*
* Return the last read status value on success or -1 on failure.
*/
-static int ich_status_poll(u16 bitmask, int wait_til_set)
+static int ich_status_poll(struct ich_spi_priv *ctlr, u16 bitmask,
+ int wait_til_set)
{
int timeout = 600000; /* This will result in 6s */
u16 status = 0;
while (timeout--) {
- status = ich_readw(ctlr.status);
+ status = ich_readw(ctlr, ctlr->status);
if (wait_til_set ^ ((status & bitmask) == 0)) {
- if (wait_til_set)
- ich_writew((status & bitmask), ctlr.status);
+ if (wait_til_set) {
+ ich_writew(ctlr, status & bitmask,
+ ctlr->status);
+ }
return status;
}
udelay(10);
printf("ICH SPI: SCIP timeout, read %x, expected %x\n",
status, bitmask);
- return -1;
+ return -ETIMEDOUT;
}
-/*
-int spi_xfer(struct spi_slave *slave, const void *dout,
- unsigned int bitsout, void *din, unsigned int bitsin)
-*/
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
+static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
- struct ich_spi_slave *ich = to_ich_spi(slave);
+ struct udevice *bus = dev_get_parent(dev);
+ struct ich_spi_priv *ctlr = dev_get_priv(bus);
uint16_t control;
int16_t opcode_index;
int with_address;
int status;
int bytes = bitlen / 8;
- struct spi_trans *trans = &ich->trans;
+ struct spi_trans *trans = &ctlr->trans;
unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END);
int using_cmd = 0;
+ int ret;
/* Ee don't support writing partial bytes. */
if (bitlen % 8) {
debug("ICH SPI: Accessing partial bytes not supported\n");
- return -1;
+ return -EPROTONOSUPPORT;
}
/* An empty end transaction can be ignored */
if (dout && type == SPI_XFER_BEGIN) {
if (bytes > ICH_MAX_CMD_LEN) {
debug("ICH SPI: Command length limit exceeded\n");
- return -1;
+ return -ENOSPC;
}
memcpy(trans->cmd, dout, bytes);
trans->cmd_len = bytes;
/* There has to always at least be an opcode. */
if (!trans->bytesout) {
debug("ICH SPI: No opcode for transfer\n");
- return -1;
+ return -EPROTO;
}
- if (ich_status_poll(SPIS_SCIP, 0) == -1)
- return -1;
+ ret = ich_status_poll(ctlr, SPIS_SCIP, 0);
+ if (ret < 0)
+ return ret;
- ich_writew(SPIS_CDS | SPIS_FCERR, ctlr.status);
+ ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status);
spi_setup_type(trans, using_cmd ? bytes : 0);
- opcode_index = spi_setup_opcode(trans);
+ opcode_index = spi_setup_opcode(ctlr, trans);
if (opcode_index < 0)
- return -1;
+ return -EINVAL;
with_address = spi_setup_offset(trans);
if (with_address < 0)
- return -1;
+ return -EINVAL;
if (trans->opcode == SPI_OPCODE_WREN) {
/*
* in order to prevent the Management Engine from
* issuing a transaction between WREN and DATA.
*/
- if (!ctlr.ichspi_lock)
- ich_writew(trans->opcode, ctlr.preop);
+ if (!ctlr->ichspi_lock)
+ ich_writew(ctlr, trans->opcode, ctlr->preop);
return 0;
}
- if (ctlr.speed && ctlr.max_speed >= 33000000) {
+ if (ctlr->speed && ctlr->max_speed >= 33000000) {
int byte;
- byte = ich_readb(ctlr.speed);
- if (ich->speed >= 33000000)
+ byte = ich_readb(ctlr, ctlr->speed);
+ if (ctlr->cur_speed >= 33000000)
byte |= SSFC_SCF_33MHZ;
else
byte &= ~SSFC_SCF_33MHZ;
- ich_writeb(byte, ctlr.speed);
+ ich_writeb(ctlr, byte, ctlr->speed);
}
/* See if we have used up the command data */
}
/* Preset control fields */
- control = ich_readw(ctlr.control);
+ control = ich_readw(ctlr, ctlr->control);
control &= ~SSFC_RESERVED;
control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
/* Issue atomic preop cycle if needed */
- if (ich_readw(ctlr.preop))
+ if (ich_readw(ctlr, ctlr->preop))
control |= SPIC_ACS;
if (!trans->bytesout && !trans->bytesin) {
/* SPI addresses are 24 bit only */
- if (with_address)
- ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr);
-
+ if (with_address) {
+ ich_writel(ctlr, trans->offset & 0x00FFFFFF,
+ ctlr->addr);
+ }
/*
* This is a 'no data' command (like Write Enable), its
* bitesout size was 1, decremented to zero while executing
* spi_setup_opcode() above. Tell the chip to send the
* command.
*/
- ich_writew(control, ctlr.control);
+ ich_writew(ctlr, control, ctlr->control);
/* wait for the result */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
+ status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1);
+ if (status < 0)
+ return status;
if (status & SPIS_FCERR) {
debug("ICH SPI: Command transaction error\n");
- return -1;
+ return -EIO;
}
return 0;
* and followed by other SPI commands, and this sequence is controlled
* by the SPI chip driver.
*/
- if (trans->bytesout > ctlr.databytes) {
+ if (trans->bytesout > ctlr->databytes) {
debug("ICH SPI: Too much to write. This should be prevented by the driver's max_write_size?\n");
- return -1;
+ return -EPROTO;
}
/*
uint32_t data_length;
/* SPI addresses are 24 bit only */
- ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr);
+ ich_writel(ctlr, trans->offset & 0x00FFFFFF, ctlr->addr);
if (trans->bytesout)
- data_length = min(trans->bytesout, ctlr.databytes);
+ data_length = min(trans->bytesout, ctlr->databytes);
else
- data_length = min(trans->bytesin, ctlr.databytes);
+ data_length = min(trans->bytesin, ctlr->databytes);
/* Program data into FDATA0 to N */
if (trans->bytesout) {
- write_reg(trans->out, ctlr.data, data_length);
+ write_reg(ctlr, trans->out, ctlr->data, data_length);
spi_use_out(trans, data_length);
if (with_address)
trans->offset += data_length;
}
/* Add proper control fields' values */
- control &= ~((ctlr.databytes - 1) << 8);
+ control &= ~((ctlr->databytes - 1) << 8);
control |= SPIC_DS;
control |= (data_length - 1) << 8;
/* write it */
- ich_writew(control, ctlr.control);
+ ich_writew(ctlr, control, ctlr->control);
/* Wait for Cycle Done Status or Flash Cycle Error. */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
+ status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1);
+ if (status < 0)
+ return status;
if (status & SPIS_FCERR) {
debug("ICH SPI: Data transaction error\n");
- return -1;
+ return -EIO;
}
if (trans->bytesin) {
- read_reg(ctlr.data, trans->in, data_length);
+ read_reg(ctlr, ctlr->data, trans->in, data_length);
spi_use_in(trans, data_length);
if (with_address)
trans->offset += data_length;
}
/* Clear atomic preop now that xfer is done */
- ich_writew(0, ctlr.preop);
+ ich_writew(ctlr, 0, ctlr->preop);
return 0;
}
* don't actually take effect until the HSFS[FLOCKDN] bit is set, but that's
* done elsewhere.
*/
-int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint)
+int spi_write_protect_region(struct udevice *dev, uint32_t lower_limit,
+ uint32_t length, int hint)
{
+ struct udevice *bus = dev->parent;
+ struct ich_spi_priv *ctlr = dev_get_priv(bus);
uint32_t tmplong;
uint32_t upper_limit;
- if (!ctlr.pr) {
+ if (!ctlr->pr) {
printf("%s: operation not supported on this chipset\n",
__func__);
- return -1;
+ return -ENOSYS;
}
if (length == 0 ||
hint < 0 || hint > 4) {
printf("%s(0x%x, 0x%x, %d): invalid args\n", __func__,
lower_limit, length, hint);
- return -1;
+ return -EPERM;
}
upper_limit = lower_limit + length - 1;
((lower_limit & 0x01fff000) >> 12);
printf("%s: writing 0x%08x to %p\n", __func__, tmplong,
- &ctlr.pr[hint]);
- ctlr.pr[hint] = tmplong;
+ &ctlr->pr[hint]);
+ ctlr->pr[hint] = tmplong;
+
+ return 0;
+}
+
+static int ich_spi_probe(struct udevice *bus)
+{
+ struct ich_spi_platdata *plat = dev_get_platdata(bus);
+ struct ich_spi_priv *priv = dev_get_priv(bus);
+ uint8_t bios_cntl;
+ int ret;
+
+ ret = ich_init_controller(plat, priv);
+ if (ret)
+ return ret;
+ /*
+ * Disable the BIOS write protect so write commands are allowed. On
+ * v9, deassert SMM BIOS Write Protect Disable.
+ */
+ if (plat->use_sbase) {
+ struct ich9_spi_regs *ich9_spi;
+
+ ich9_spi = priv->base;
+ bios_cntl = ich_readb(priv, ich9_spi->bcr);
+ bios_cntl &= ~(1 << 5); /* clear Enable InSMM_STS (EISS) */
+ bios_cntl |= 1; /* Write Protect Disable (WPD) */
+ ich_writeb(priv, bios_cntl, ich9_spi->bcr);
+ } else {
+ pci_read_config_byte(plat->dev, 0xdc, &bios_cntl);
+ if (plat->ich_version == 9)
+ bios_cntl &= ~(1 << 5);
+ pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1);
+ }
+
+ priv->cur_speed = priv->max_speed;
+
+ return 0;
+}
+
+static int ich_spi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct ich_spi_platdata *plat = dev_get_platdata(bus);
+ int ret;
+
+ ret = ich_find_spi_controller(plat);
+ if (ret)
+ return ret;
return 0;
}
+
+static int ich_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct ich_spi_priv *priv = dev_get_priv(bus);
+
+ priv->cur_speed = speed;
+
+ return 0;
+}
+
+static int ich_spi_set_mode(struct udevice *bus, uint mode)
+{
+ debug("%s: mode=%d\n", __func__, mode);
+
+ return 0;
+}
+
+static int ich_spi_child_pre_probe(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct ich_spi_platdata *plat = dev_get_platdata(bus);
+ struct ich_spi_priv *priv = dev_get_priv(bus);
+ struct spi_slave *slave = dev_get_parentdata(dev);
+
+ /*
+ * Yes this controller can only write a small number of bytes at
+ * once! The limit is typically 64 bytes.
+ */
+ slave->max_write_size = priv->databytes;
+ /*
+ * ICH 7 SPI controller only supports array read command
+ * and byte program command for SST flash
+ */
+ if (plat->ich_version == 7) {
+ slave->op_mode_rx = SPI_OPM_RX_AS;
+ slave->op_mode_tx = SPI_OPM_TX_BP;
+ }
+
+ return 0;
+}
+
+static const struct dm_spi_ops ich_spi_ops = {
+ .xfer = ich_spi_xfer,
+ .set_speed = ich_spi_set_speed,
+ .set_mode = ich_spi_set_mode,
+ /*
+ * cs_info is not needed, since we require all chip selects to be
+ * in the device tree explicitly
+ */
+};
+
+static const struct udevice_id ich_spi_ids[] = {
+ { .compatible = "intel,ich-spi" },
+ { }
+};
+
+U_BOOT_DRIVER(ich_spi) = {
+ .name = "ich_spi",
+ .id = UCLASS_SPI,
+ .of_match = ich_spi_ids,
+ .ops = &ich_spi_ops,
+ .ofdata_to_platdata = ich_spi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ich_spi_platdata),
+ .priv_auto_alloc_size = sizeof(struct ich_spi_priv),
+ .child_pre_probe = ich_spi_child_pre_probe,
+ .probe = ich_spi_probe,
+};
projects / karo-tx-uboot.git / commitdiff