CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = microblaze-uclinux-
+CROSS_COMPILE = mb-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/cramfs/libcramfs.a fs/ext2/libext2fs.a fs/fat/libfat.a \
- fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a \
- fs/romfs/libromfs.a
+LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
tags ctags:
ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+endif
+
+INCS := -I../common -I../xilinx_enet
+CFLAGS += $(INCS)
+HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o
+COBJS = $(BOARD).o \
+ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
+ ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+ ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+ ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
+ ../common/xbasic_types.o ../common/xdma_channel.o \
+ ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+ ../common/xversion.o \
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
#
-TEXT_BASE = 0x30000000
+TEXT_BASE = 0x38000000
-PLATFORM_CPPFLAGS += -mxl-pattern-compare
PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mcpu=v5.00.c
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
/* System Clock Frequency */
#define XILINX_CLOCK_FREQ 100000000
-/* Microblaze is microblaze_0 */
-#define XILINX_USE_MSR_INSTR 1
-#define XILINX_PVR 0
-#define XILINX_FSL_NUMBER 0
-
/* Interrupt controller is opb_intc_0 */
#define XILINX_INTC_BASEADDR 0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS 7
+#define XILINX_INTC_NUM_INTR_INPUTS 11
/* Timer pheriphery is opb_timer_1 */
#define XILINX_TIMER_BASEADDR 0x41c00000
-#define XILINX_TIMER_IRQ 0
+#define XILINX_TIMER_IRQ 1
/* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UARTLITE_BASEADDR 0x40600000
-#define XILINX_UARTLITE_BAUDRATE 115200
-
-/* IIC doesn't exist */
+#define XILINX_UART_BASEADDR 0x40600000
+#define XILINX_UART_BAUDRATE 115200
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
/* Sysace Controller is SysACE_CompactFlash */
#define XILINX_SYSACE_BASEADDR 0x41800000
+#define XILINX_SYSACE_HIGHADDR 0x4180ffff
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMAC_BASEADDR 0x40c00000
-#define XILINX_EMAC_DMA_PRESENT 3
-#define XILINX_EMAC_HALF_DUPLEX_EXIST 1
-#define XILINX_EMAC_MII_EXIST 1
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
*/
/*
- * JFFS2/CRAMFS/ROMFS support
+ * JFFS2/CRAMFS support
*/
#include <common.h>
#include <command.h>
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
-extern int romfs_check (struct part_info *info);
-extern int romfs_load (char *loadoffset, struct part_info *info, char *filename);
-extern int romfs_ls (struct part_info *info, char *filename);
-extern int romfs_info (struct part_info *info);
-
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
/* command line only routines */
if ((part = jffs2_part_info(current_dev, current_partnum))){
- /* check partition type for JFFS2, cramfs, romfs */
- if (cramfs_check(part)) {
- fsname = "CRAMFS";
- } else if (romfs_check(part)) {
- fsname = "ROMFS";
- } else {
- fsname = "JFFS2";
- }
+ /* check partition type for cramfs */
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset);
if (cramfs_check(part)) {
size = cramfs_load ((char *) offset, part, filename);
- } else if (romfs_check(part)){
- size = romfs_load ((char *) offset, part, filename);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
+ /* if this is not cramfs assume jffs2 */
size = jffs2_1pass_load((char *)offset, part, filename);
}
/* check partition type for cramfs */
if (cramfs_check(part)) {
ret = cramfs_ls (part, filename);
- } else if (romfs_check(part)) {
- ret = romfs_ls (part, filename);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
+ /* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_ls(part, filename);
}
int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info *part;
+ char *fsname;
int ret;
/* make sure we are in sync with env variables */
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
- puts("### filesystem type is ");
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
+ printf("### filesystem type is %s\n", fsname);
if (cramfs_check(part)) {
- puts("CRAMFS\n");
ret = cramfs_info (part);
- } else if (romfs_check(part)) {
- puts("ROMFS\n");
- ret = romfs_info (part);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
- puts("JFFS2\n");
+ /* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_info(part);
}
reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
- if (argc < 2) {
+ if (argc < 1) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
puts ("ESR");
break;
default:
- puts ("Unsupported register\n");
return 1;
}
printf (": 0x%08lx\n", val);
" 3 - blocking control write\n");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "rspr - read/write special purpose register\n",
+ "rmsr - read/write special purpose register\n",
"- reg_num [write value] read/write special purpose register\n"
- " 1 - MSR - Machine status register\n"
- " 3 - EAR - Exception address register\n"
- " 5 - ESR - Exception status register\n");
+ " 0 - MSR - Machine status register\n"
+ " 1 - EAR - Exception address register\n"
+ " 2 - ESR - Exception status register\n");
#endif
/*
* (C) Copyright 2007 Michal Simek
*
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <moonstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
addi r1, r0, CFG_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
- addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
+ addi r6, r0, 0xb000 /* hex b000 opcode imm */
+ bslli r6, r6, 16 /* shift */
swi r6, r0, 0x0 /* reset address */
swi r6, r0, 0x8 /* user vector exception */
swi r6, r0, 0x10 /* interrupt */
swi r6, r0, 0x20 /* hardware exception */
- addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/
+ addi r6, r0, 0xb808 /* hew b808 opcode brai*/
+ bslli r6, r6, 16
swi r6, r0, 0x4 /* reset address */
swi r6, r0, 0xC /* user vector exception */
swi r6, r0, 0x14 /* interrupt */
timestamp = 0;
}
-#ifdef CFG_TIMER_0
ulong get_timer (ulong base)
{
return (timestamp - base);
}
-#else
-ulong get_timer (ulong base)
-{
- return (timestamp++ - base);
-}
-#endif
void set_timer (ulong t)
{
include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
-COBJS := mcffec.o xilinx_emac.o xilinx_emaclite.o
+
+COBJS := mcffec.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#include <config.h>
-#ifdef XILINX_UARTLITE
+#ifdef CONFIG_MICROBLAZE
#include <asm/serial_xuartlite.h>
#
#
-SUBDIRS := romfs jffs2 cramfs fdos fat reiserfs ext2
+SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
/*
* (C) Copyright 2007 Czech Technical University.
*
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <monstr@seznam.cz>
*
* See file CREDITS for list of people who contributed to this
* project.
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
-#define XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
* 0x11FB_F000 CFG_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
/* global pointer */
#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
/* start of global data */
-#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
-#endif
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
-
-#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-#endif
+#define CONFIG_CMD_RUN
#if defined(FLASH)
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVES
#endif
-#else
- #undef CONFIG_CMD_FLASH
#endif
#if defined(CONFIG_CMD_JFFS2)
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "ml401"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.5
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CFG_USR_EXCEP /* user exception */
#define CFG_HZ 1000
+/* system ace */
+#define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define SYSTEMACE_CONFIG_FPGA
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+#define CONFIG_DOS_PARTITION
+
#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
-#define XILINX_UARTLITE
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_MEMORY
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_MISC
#define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define XILINX_CLOCK_FREQ 50000000
-
#endif /* __CONFIG_H */
#define CONFIG_XUPV2P 1
/* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-#define XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 4
-#define CONFIG_CONS_INDEX 1
-#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-
-#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 115200 }
-#endif
-#endif
/* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define XILINX_EMAC 1
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define XILINX_EMACLITE 1
-#endif
-#endif
-#undef ET_DEBUG
+#define CONFIG_EMAC 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
/*
* setting reset address
* U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
* jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
*/
-/* #define CFG_RESET_ADDRESS 0x36000000 */
+#define CFG_RESET_ADDRESS 0x36000000
/* gpio */
-#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
-#endif
/* interrupt controller */
#define CFG_INTC_0 1
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
#define CONFIG_CMD_PING
-#ifdef XILINX_SYSACE_BASEADDR
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#endif
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "xupv2p"
+#define CONFIG_HOSTNAME "ml401"
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
"echo"
/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
#define CONFIG_SYSTEMACE
/* #define DEBUG_SYSTEMACE */
#define SYSTEMACE_CONFIG_FPGA
#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
-#endif
#endif /* __CONFIG_H */
#include <common.h>
-#ifdef CFG_TIMER_0
void udelay (unsigned long usec)
{
int i;
i = get_timer (0);
while ((get_timer (0) - i) < (usec / 1000)) ;
}
-#else
-void udelay (unsigned long usec)
-{
- unsigned int i;
- for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++);
-}
-#endif
projects / karo-tx-uboot.git / commitdiff